1 files changed, 2 insertions, 129 deletions
diff --git a/dts/Bindings/mtd/partition.txt b/dts/Bindings/mtd/partition.txt
index 4a39698221..ead90e8274 100644
--- a/dts/Bindings/mtd/partition.txt
+++ b/dts/Bindings/mtd/partition.txt
@@ -24,137 +24,10 @@ another partitioning method.
 Available bindings are listed in the "partitions" subdirectory.
 
 
-Fixed Partitions
-================
-
-Partitions can be represented by sub-nodes of a flash device. This can be used
-on platforms which have strong conventions about which portions of a flash are
-used for what purposes, but which don't use an on-flash partition table such
-as RedBoot.
-
-The partition table should be a subnode of the flash node and should be named
-'partitions'. This node should have the following property:
-- compatible : (required) must be "fixed-partitions"
-Partitions are then defined in subnodes of the partitions node.
+Deprecated: partitions defined in flash node
+============================================
 
 For backwards compatibility partitions as direct subnodes of the flash device are
 supported. This use is discouraged.
 NOTE: also for backwards compatibility, direct subnodes that have a compatible
 string are not considered partitions, as they may be used for other bindings.
-
-#address-cells & #size-cells must both be present in the partitions subnode of the
-flash device. There are two valid values for both:
-<1>: for partitions that require a single 32-bit cell to represent their
-     size/address (aka the value is below 4 GiB)
-<2>: for partitions that require two 32-bit cells to represent their
-     size/address (aka the value is 4 GiB or greater).
-
-Required properties:
-- reg : The partition's offset and size within the flash
-
-Optional properties:
-- label : The label / name for this partition.  If omitted, the label is taken
-  from the node name (excluding the unit address).
-- read-only : This parameter, if present, is a hint to Linux that this
-  partition should only be mounted read-only. This is usually used for flash
-  partitions containing early-boot firmware images or data which should not be
-  clobbered.
-- lock : Do not unlock the partition at initialization time (not supported on
-  all devices)
-- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
-  partition attached to an MLC NAND thus making this partition immune to
-  paired-pages corruptions
-
-Examples:
-
-
-flash@0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0000000 0x100000>;
-			read-only;
-		};
-
-		uimage@100000 {
-			reg = <0x0100000 0x200000>;
-		};
-	};
-};
-
-flash@1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <2>;
-
-		/* a 4 GiB partition */
-		partition@0 {
-			label = "filesystem";
-			reg = <0x00000000 0x1 0x00000000>;
-		};
-	};
-};
-
-flash@2 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		/* an 8 GiB partition */
-		partition@0 {
-			label = "filesystem #1";
-			reg = <0x0 0x00000000 0x2 0x00000000>;
-		};
-
-		/* a 4 GiB partition */
-		partition@200000000 {
-			label = "filesystem #2";
-			reg = <0x2 0x00000000 0x1 0x00000000>;
-		};
-	};
-};
-
-flash@3 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x000000 0x100000>;
-			read-only;
-		};
-
-		firmware@100000 {
-			label = "firmware";
-			reg = <0x100000 0xe00000>;
-			compatible = "brcm,trx";
-		};
-
-		calibration@f00000 {
-			label = "calibration";
-			reg = <0xf00000 0x100000>;
-			compatible = "fixed-partitions";
-			ranges = <0 0xf00000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "wifi0";
-				reg = <0x000000 0x080000>;
-			};
-
-			partition@80000 {
-				label = "wifi1";
-				reg = <0x080000 0x080000>;
-			};
-		};
-	};
-};