diff options
Diffstat (limited to 'dts/Bindings/net/can')
-rw-r--r-- | dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml | 24 | ||||
-rw-r--r-- | dts/Bindings/net/can/bosch,m_can.yaml | 52 | ||||
-rw-r--r-- | dts/Bindings/net/can/tcan4x5x.txt | 2 |
3 files changed, 50 insertions, 28 deletions
diff --git a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml index a95960ee3f..c93fe9d3ea 100644 --- a/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/dts/Bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -17,6 +17,7 @@ properties: - const: allwinner,sun7i-a20-can - const: allwinner,sun4i-a10-can - const: allwinner,sun4i-a10-can + - const: allwinner,sun8i-r40-can reg: maxItems: 1 @@ -27,6 +28,19 @@ properties: clocks: maxItems: 1 + resets: + maxItems: 1 + +if: + properties: + compatible: + contains: + const: allwinner,sun8i-r40-can + +then: + required: + - resets + required: - compatible - reg @@ -47,5 +61,15 @@ examples: interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_CAN>; }; + - | + #define RST_BUS_CAN 68 + #define CLK_BUS_CAN 91 + can1: can@1c2bc00 { + compatible = "allwinner,sun8i-r40-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CAN>; + resets = <&ccu RST_BUS_CAN>; + }; ... diff --git a/dts/Bindings/net/can/bosch,m_can.yaml b/dts/Bindings/net/can/bosch,m_can.yaml index fb547e26c6..401ab7cdb3 100644 --- a/dts/Bindings/net/can/bosch,m_can.yaml +++ b/dts/Bindings/net/can/bosch,m_can.yaml @@ -76,33 +76,31 @@ properties: M_CAN user manual for details. $ref: /schemas/types.yaml#/definitions/int32-array items: - items: - - description: The 'offset' is an address offset of the Message RAM where - the following elements start from. This is usually set to 0x0 if - you're using a private Message RAM. - default: 0 - - description: 11-bit Filter 0-128 elements / 0-128 words - minimum: 0 - maximum: 128 - - description: 29-bit Filter 0-64 elements / 0-128 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 0 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 1 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx Buffers 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Tx Event FIFO 0-32 elements / 0-64 words - minimum: 0 - maximum: 32 - - description: Tx Buffers 0-32 elements / 0-576 words - minimum: 0 - maximum: 32 - maxItems: 1 + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 power-domains: description: diff --git a/dts/Bindings/net/can/tcan4x5x.txt b/dts/Bindings/net/can/tcan4x5x.txt index 0968b40aef..e3501bfa22 100644 --- a/dts/Bindings/net/can/tcan4x5x.txt +++ b/dts/Bindings/net/can/tcan4x5x.txt @@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; |