1 files changed, 0 insertions, 92 deletions
diff --git a/dts/Bindings/net/cortina,gemini-ethernet.txt b/dts/Bindings/net/cortina,gemini-ethernet.txt
deleted file mode 100644
index 6c559981d1..0000000000
--- a/dts/Bindings/net/cortina,gemini-ethernet.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Cortina Systems Gemini Ethernet Controller
-==========================================
-
-This ethernet controller is found in the Gemini SoC family:
-StorLink SL3512 and SL3516, also known as Cortina Systems
-CS3512 and CS3516.
-
-Required properties:
-- compatible: must be "cortina,gemini-ethernet"
-- reg: must contain the global registers and the V-bit and A-bit
-  memory areas, in total three register sets.
-- syscon: a phandle to the system controller
-- #address-cells: must be specified, must be <1>
-- #size-cells: must be specified, must be <1>
-- ranges: should be state like this giving a 1:1 address translation
-  for the subnodes
-
-The subnodes represents the two ethernet ports in this device.
-They are not independent of each other since they share resources
-in the parent node, and are thus children.
-
-Required subnodes:
-- port0: contains the resources for ethernet port 0
-- port1: contains the resources for ethernet port 1
-
-Required subnode properties:
-- compatible: must be "cortina,gemini-ethernet-port"
-- reg: must contain two register areas: the DMA/TOE memory and
-  the GMAC memory area of the port
-- interrupts: should contain the interrupt line of the port.
-  this is nominally a level interrupt active high.
-- resets: this must provide an SoC-integrated reset line for
-  the port.
-- clocks: this should contain a handle to the PCLK clock for
-  clocking the silicon in this port
-- clock-names: must be "PCLK"
-
-Optional subnode properties:
-- phy-mode: see ethernet.txt
-- phy-handle: see ethernet.txt
-
-Example:
-
-mdio-bus {
-	(...)
-	phy0: ethernet-phy@1 {
-		reg = <1>;
-		device_type = "ethernet-phy";
-	};
-	phy1: ethernet-phy@3 {
-		reg = <3>;
-		device_type = "ethernet-phy";
-	};
-};
-
-
-ethernet@60000000 {
-	compatible = "cortina,gemini-ethernet";
-	reg = <0x60000000 0x4000>, /* Global registers, queue */
-	      <0x60004000 0x2000>, /* V-bit */
-	      <0x60006000 0x2000>; /* A-bit */
-	syscon = <&syscon>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	gmac0: ethernet-port@0 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-		      <0x6000a000 0x2000>; /* Port 0 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC0>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy0>;
-	};
-
-	gmac1: ethernet-port@1 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-		      <0x6000e000 0x2000>; /* Port 1 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC1>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy1>;
-	};
-};