summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net/dsa/dsa.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/net/dsa/dsa.txt')
-rw-r--r--dts/Bindings/net/dsa/dsa.txt160
1 files changed, 2 insertions, 158 deletions
diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt
index d66a529..f66bb7e 100644
--- a/dts/Bindings/net/dsa/dsa.txt
+++ b/dts/Bindings/net/dsa/dsa.txt
@@ -1,12 +1,6 @@
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------
-Two bindings exist, one of which has been deprecated due to
-limitations.
-
-Current Binding
----------------
-
Switches are true Linux devices and can be probed by any means. Once
probed, they register to the DSA framework, passing a node
pointer. This node is expected to fulfil the following binding, and
@@ -71,9 +65,8 @@ properties, described in binding documents:
Documentation/devicetree/bindings/net/fixed-link.txt
for details.
-- local-mac-address : See
- Documentation/devicetree/bindings/net/ethernet.txt
- for details.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Example
@@ -262,152 +255,3 @@ linked into one DSA cluster.
};
};
};
-
-Deprecated Binding
-------------------
-
-The deprecated binding makes use of a platform device to represent the
-switches. The switches themselves are not Linux devices, and make use
-of an MDIO bus for management.
-
-Required properties:
-- compatible : Should be "marvell,dsa"
-- #address-cells : Must be 2, first cell is the address on the MDIO bus
- and second cell is the address in the switch tree.
- Second cell is used only when cascading/chaining.
-- #size-cells : Must be 0
-- dsa,ethernet : Should be a phandle to a valid Ethernet device node
-- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
-
-Optional properties:
-- interrupts : property with a value describing the switch
- interrupt number (not supported by the driver)
-
-A DSA node can contain multiple switch chips which are therefore child nodes of
-the parent DSA node. The maximum number of allowed child nodes is 4
-(DSA_MAX_SWITCHES).
-Each of these switch child nodes should have the following required properties:
-
-- reg : Contains two fields. The first one describes the
- address on the MII bus. The second is the switch
- number that must be unique in cascaded configurations
-- #address-cells : Must be 1
-- #size-cells : Must be 0
-
-A switch child node has the following optional property:
-
-- eeprom-length : Set to the length of an EEPROM connected to the
- switch. Must be set if the switch can not detect
- the presence and/or size of a connected EEPROM,
- otherwise optional.
-
-A switch may have multiple "port" children nodes
-
-Each port children node must have the following mandatory properties:
-- reg : Describes the port address in the switch
-- label : Describes the label associated with this port, special
- labels are "cpu" to indicate a CPU port and "dsa" to
- indicate an uplink/downlink port.
-
-Note that a port labelled "dsa" will imply checking for the uplink phandle
-described below.
-
-Optional property:
-- link : Should be a list of phandles to another switch's DSA port.
- This property is only used when switches are being
- chained/cascaded together. This port is used as outgoing port
- towards the phandle port, which can be more than one hop away.
-
-- phy-handle : Phandle to a PHY on an external MDIO bus, not the
- switch internal one. See
- Documentation/devicetree/bindings/net/ethernet.txt
- for details.
-
-- phy-mode : String representing the connection to the designated
- PHY node specified by the 'phy-handle' property. See
- Documentation/devicetree/bindings/net/ethernet.txt
- for details.
-
-- mii-bus : Should be a phandle to a valid MDIO bus device node.
- This mii-bus will be used in preference to the
- global dsa,mii-bus defined above, for this switch.
-
-Optional subnodes:
-- fixed-link : Fixed-link subnode describing a link to a non-MDIO
- managed entity. See
- Documentation/devicetree/bindings/net/fixed-link.txt
- for details.
-
-Example:
-
- dsa@0 {
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- interrupts = <10>;
- dsa,ethernet = <&ethernet0>;
- dsa,mii-bus = <&mii_bus0>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <16 0>; /* MDIO address 16, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan1";
- phy-handle = <&phy0>;
- };
-
- port@1 {
- reg = <1>;
- label = "lan2";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
-
- switch0port6: port@6 {
- reg = <6>;
- label = "dsa";
- link = <&switch1port0
- &switch2port0>;
- };
- };
-
- switch@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <17 1>; /* MDIO address 17, switch 1 in tree */
- mii-bus = <&mii_bus1>;
- reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
- switch1port0: port@0 {
- reg = <0>;
- label = "dsa";
- link = <&switch0port6>;
- };
- switch1port1: port@1 {
- reg = <1>;
- label = "dsa";
- link = <&switch2port1>;
- };
- };
-
- switch@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <18 2>; /* MDIO address 18, switch 2 in tree */
- mii-bus = <&mii_bus1>;
-
- switch2port0: port@0 {
- reg = <0>;
- label = "dsa";
- link = <&switch1port1
- &switch0port6>;
- };
- };
- };