diff options
Diffstat (limited to 'dts/Bindings/net/ethernet-controller.yaml')
| -rw-r--r-- | dts/Bindings/net/ethernet-controller.yaml | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml index fdf7098172..0965f6515f 100644 --- a/dts/Bindings/net/ethernet-controller.yaml +++ b/dts/Bindings/net/ethernet-controller.yaml @@ -16,7 +16,7 @@ properties: local-mac-address: description: Specifies the MAC address that was assigned to the network device. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 @@ -27,20 +27,20 @@ properties: program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 max-frame-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there\'s contradiction in the Devicetree Specification). max-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Specifies maximum speed in Mbit/s supported by the device. @@ -95,12 +95,13 @@ properties: # 10GBASE-KR, XFI, SFI - 10gbase-kr - usxgmii + - 10gbase-r phy-mode: $ref: "#/properties/phy-connection-type" phy-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a PHY device. @@ -113,7 +114,7 @@ properties: deprecated: true rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s receive fifo in bytes. This is used for components that can have configurable receive fifo sizes, @@ -128,12 +129,12 @@ properties: If this property is present then the MAC applies the RX delay. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. @@ -149,7 +150,7 @@ properties: description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string default: auto enum: - auto @@ -197,17 +198,17 @@ properties: speed: description: Link speed. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [10, 100, 1000] full-duplex: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that full-duplex is used. When absent, half duplex is assumed. asym-pause: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that asym_pause should be enabled. |