diff options
Diffstat (limited to 'dts/Bindings/net/fsl-fman.txt')
| -rw-r--r-- | dts/Bindings/net/fsl-fman.txt | 133 |
1 files changed, 4 insertions, 129 deletions
diff --git a/dts/Bindings/net/fsl-fman.txt b/dts/Bindings/net/fsl-fman.txt index 801efc7d68..bda4b41af0 100644 --- a/dts/Bindings/net/fsl-fman.txt +++ b/dts/Bindings/net/fsl-fman.txt @@ -232,133 +232,7 @@ port@81000 { ============================================================================= FMan dTSEC/XGEC/mEMAC Node -DESCRIPTION - -mEMAC/dTSEC/XGEC are the Ethernet network interfaces - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include one of the following: - - "fsl,fman-dtsec" for dTSEC MAC - - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac" for mEMAC MAC - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the MAC id. - - The cell-index value may be used by the FMan or the SoC, to - identify the MAC unit in the FMan (or SoC) memory map. - In the tables below there's a description of the cell-index - use, there are two tables, one describes the use of cell-index - by the FMan, the second describes the use by the SoC: - - 1. FMan Registers - - FManV2: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16] XGEC 8 - FM_EPI[16+n] dTSECn n-1 - FM_NPI[11+n] dTSECn n-1 - n = 1,..,5 - - FManV3: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16+n] mEMACn n-1 - FM_EPI[25] mEMAC10 9 - - FM_NPI[11+n] mEMACn n-1 - FM_NPI[10] mEMAC10 9 - FM_NPI[11] mEMAC9 8 - n = 1,..8 - - FM_EPI and FM_NPI are located in the FMan memory map. - - 2. SoC registers: - - - P2041, P3041, P4080 P5020, P5040: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_DEVDISR2[7] 1 XGEC 8 - DCFG_DEVDISR2[7+n] 1 dTSECn n-1 - DCFG_DEVDISR2[15] 2 XGEC 8 - DCFG_DEVDISR2[15+n] 2 dTSECn n-1 - n = 1,..5 - - - T1040, T2080, T4240, B4860: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 - DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 - n = 1,..6,9,10 - - EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in - the specific SoC "Device Configuration/Pin Control" Memory - Map. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- fsl,fman-ports - Usage: required - Value type: <prop-encoded-array> - Definition: An array of two phandles - the first references is - the FMan RX port and the second is the TX port used by this - MAC. - -- ptp-timer - Usage required - Value type: <phandle> - Definition: A phandle for 1EEE1588 timer. - -- pcsphy-handle - Usage required for "fsl,fman-memac" MACs - Value type: <phandle> - Definition: A phandle for pcsphy. - -- tbi-handle - Usage required for "fsl,fman-dtsec" MACs - Value type: <phandle> - Definition: A phandle for tbiphy. - -EXAMPLE - -fman1_tx28: port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; -}; - -fman1_rx8: port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; -}; - -ptp-timer: ptp_timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; -}; - -ethernet@e0000 { - compatible = "fsl,fman-dtsec"; - cell-index = <0>; - reg = <0xe0000 0x1000>; - fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; - ptp-timer = <&ptp-timer>; - tbi-handle = <&tbi0>; -}; +Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml ============================================================================ FMan IEEE 1588 Node @@ -446,8 +320,9 @@ For internal PHY device on internal mdio bus, a PHY node should be created. See the definition of the PHY node in booting-without-of.txt for an example of how to define a PHY (Internal PHY has no interrupt line). - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. -- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY, - PCS PHY addr must be '0'. +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY. + The PCS PHY address should correspond to the value of the appropriate + MDEV_PORT. EXAMPLE |