1 files changed, 98 insertions, 0 deletions
diff --git a/dts/Bindings/net/litex,liteeth.yaml b/dts/Bindings/net/litex,liteeth.yaml
new file mode 100644
index 0000000000..76c164a819
--- /dev/null
+++ b/dts/Bindings/net/litex,liteeth.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/litex,liteeth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteETH ethernet device
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description: |
+  LiteETH is a small footprint and configurable Ethernet core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/liteeth/.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,liteeth
+
+  reg:
+    items:
+      - description: MAC registers
+      - description: MDIO registers
+      - description: Packet buffer
+
+  reg-names:
+    items:
+      - const: mac
+      - const: mdio
+      - const: buffer
+
+  interrupts:
+    maxItems: 1
+
+  litex,rx-slots:
+    description: Number of slots in the receive buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,tx-slots:
+    description: Number of slots in the transmit buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,slot-size:
+    description: Size in bytes of a slot in the tx/rx buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x800
+    default: 0x800
+
+  mac-address: true
+  local-mac-address: true
+  phy-handle: true
+
+  mdio:
+    $ref: mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mac: ethernet@8020000 {
+        compatible = "litex,liteeth";
+        reg = <0x8021000 0x100>,
+              <0x8020800 0x100>,
+              <0x8030000 0x2000>;
+        reg-names = "mac", "mdio", "buffer";
+        litex,rx-slots = <2>;
+        litex,tx-slots = <2>;
+        litex,slot-size = <0x800>;
+        interrupts = <0x11 0x1>;
+        phy-handle = <&eth_phy>;
+
+        mdio {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          eth_phy: ethernet-phy@0 {
+            reg = <0>;
+          };
+        };
+    };
+...
+
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :