1 files changed, 0 insertions, 33 deletions
diff --git a/dts/Bindings/net/nfc/nxp-nci.txt b/dts/Bindings/net/nfc/nxp-nci.txt
deleted file mode 100644
index 285a37c2f1..0000000000
--- a/dts/Bindings/net/nfc/nxp-nci.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors NXP NCI NFC Controllers
-
-Required properties:
-- compatible: Should be "nxp,nxp-nci-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the chip
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
-
-&i2c2 {
-
-
-	npc100: npc100@29 {
-
-		compatible = "nxp,nxp-nci-i2c";
-
-		reg = <0x29>;
-		clock-frequency = <100000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-};