diff options
Diffstat (limited to 'dts/Bindings/net/nfc')
| -rw-r--r-- | dts/Bindings/net/nfc/st21nfcb.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/net/nfc/trf7970a.txt | 8 |
2 files changed, 9 insertions, 1 deletions
diff --git a/dts/Bindings/net/nfc/st21nfcb.txt b/dts/Bindings/net/nfc/st21nfcb.txt index 3b58ae4803..9005608cbb 100644 --- a/dts/Bindings/net/nfc/st21nfcb.txt +++ b/dts/Bindings/net/nfc/st21nfcb.txt @@ -26,7 +26,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): clock-frequency = <400000>; interrupt-parent = <&gpio5>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/Bindings/net/nfc/trf7970a.txt b/dts/Bindings/net/nfc/trf7970a.txt index 1e43613368..7c89ca290c 100644 --- a/dts/Bindings/net/nfc/trf7970a.txt +++ b/dts/Bindings/net/nfc/trf7970a.txt @@ -13,6 +13,11 @@ Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. - autosuspend-delay: Specify autosuspend delay in milliseconds. +- vin-voltage-override: Specify voltage of VIN pin in microvolts. +- irq-status-read-quirk: Specify that the trf7970a being used has the + "IRQ Status Read" erratum. +- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF" + erratum. Example (for ARM-based BeagleBone with TRF7970A on SPI1): @@ -30,7 +35,10 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, <&gpio2 5 GPIO_ACTIVE_LOW>; vin-supply = <&ldo3_reg>; + vin-voltage-override = <5000000>; autosuspend-delay = <30000>; + irq-status-read-quirk; + en2-rf-quirk; status = "okay"; }; }; |