Diffstat (limited to 'dts/Bindings/net/stm32-dwmac.txt')
1 files changed, 16 insertions, 2 deletions
diff --git a/dts/Bindings/net/stm32-dwmac.txt b/dts/Bindings/net/stm32-dwmac.txt
index 489dbcb..1341012 100644
@@ -6,14 +6,28 @@ Please see stmmac.txt for the other unchanged properties.
The device node has following properties.
-- compatible: Should be "st,stm32-dwmac" to select glue, and
+- compatible: For MCU family should be "st,stm32-dwmac" to select glue, and
"snps,dwmac-3.50a" to select IP version.
+ For MPU family should be "st,stm32mp1-dwmac" to select
+ glue, and "snps,dwmac-4.20a" to select IP version.
- clocks: Must contain a phandle for each entry in clock-names.
- clock-names: Should be "stmmaceth" for the host clock.
Should be "mac-clk-tx" for the MAC TX clock.
Should be "mac-clk-rx" for the MAC RX clock.
+ For MPU family need to add also "ethstp" for power mode clock and,
+ "syscfg-clk" for SYSCFG clock.
+- interrupt-names: Should contain a list of interrupt names corresponding to
+ the interrupts in the interrupts property, if available.
+ Should be "macirq" for the main MAC IRQ
+ Should be "eth_wake_irq" for the IT which wake up system
- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
- encompases the glue register, and the offset of the control register.
+ encompases the glue register, and the offset of the control register.
+- clock-names: For MPU family "mac-clk-ck" for PHY without quartz
+- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock
+ by RCC