diff options
Diffstat (limited to 'dts/Bindings/net/stm32-dwmac.yaml')
| -rw-r--r-- | dts/Bindings/net/stm32-dwmac.yaml | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/dts/Bindings/net/stm32-dwmac.yaml b/dts/Bindings/net/stm32-dwmac.yaml new file mode 100644 index 0000000000..fafa34cebd --- /dev/null +++ b/dts/Bindings/net/stm32-dwmac.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller + +maintainers: + - Alexandre Torgue <alexandre.torgue@st.com> + - Christophe Roullier <christophe.roullier@st.com> + +description: + This file documents platform glue layer for stmmac. + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - st,stm32-dwmac + - st,stm32mp1-dwmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32mp1-dwmac + - const: snps,dwmac-4.20a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-4.10a + - items: + - enum: + - st,stm32-dwmac + - const: snps,dwmac-3.50a + + clocks: + minItems: 3 + maxItems: 5 + items: + - description: GMAC main clock + - description: MAC TX clock + - description: MAC RX clock + - description: For MPU family, used for power mode + - description: For MPU family, used for PHY without quartz + + clock-names: + minItems: 3 + maxItems: 5 + contains: + enum: + - stmmaceth + - mac-clk-tx + - mac-clk-rx + - ethstp + - eth-ck + + st,syscon: + $ref: "/schemas/types.yaml#/definitions/phandle-array" + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, and the offset of the control register + + st,eth-clk-sel: + description: + set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. + type: boolean + + st,eth-ref-clk-sel: + description: + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. + type: boolean + +required: + - compatible + - clocks + - clock-names + - st,syscon + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + #include <dt-bindings/mfd/stm32h7-rcc.h> + //Example 1 + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc ETHCK_K>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + phy-mode = "rgmii"; + }; + + //Example 2 (MCU example) + ethernet1: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <0 61 0>, <0 62 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + snps,mixed-burst; + phy-mode = "mii"; + }; + + //Example 3 + ethernet2: ethernet@40027000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + phy-mode = "mii"; + }; |