1 files changed, 0 insertions, 57 deletions
diff --git a/dts/Bindings/net/wireless/ti,wlcore,spi.txt b/dts/Bindings/net/wireless/ti,wlcore,spi.txt
deleted file mode 100644
index cb5c9e1569..0000000000
--- a/dts/Bindings/net/wireless/ti,wlcore,spi.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Texas Instruments wl12xx/wl18xx wireless lan controller
-
-The wl12xx/wl18xx chips can be connected via SPI or via SDIO. This
-document describes the binding for the SPI connected chip.
-
-Required properties:
-- compatible :          Should be one of the following:
-    * "ti,wl1271"
-    * "ti,wl1273"
-    * "ti,wl1281"
-    * "ti,wl1283"
-    * "ti,wl1801"
-    * "ti,wl1805"
-    * "ti,wl1807"
-    * "ti,wl1831"
-    * "ti,wl1835"
-    * "ti,wl1837"
-- reg :                 Chip select address of device
-- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
-- interrupts :          Should contain parameters for 1 interrupt line.
-- vwlan-supply :        Point the node of the regulator that powers/enable the
-                        wl12xx/wl18xx chip
-
-Optional properties:
-- ref-clock-frequency : Reference clock frequency (should be set for wl12xx)
-- clock-xtal :          boolean, clock is generated from XTAL
-
-- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
-  for optional SPI connection related properties,
-
-Examples:
-
-For wl12xx family:
-&spi1 {
-	wlcore: wlcore@1 {
-		compatible = "ti,wl1271";
-		reg = <1>;
-		spi-max-frequency = <48000000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		vwlan-supply = <&vwlan_fixed>;
-		clock-xtal;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-For wl18xx family:
-&spi0 {
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
-		vwlan-supply = <&vwlan_fixed>;
-	};
-};