summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net/xilinx_axienet.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/net/xilinx_axienet.txt')
-rw-r--r--dts/Bindings/net/xilinx_axienet.txt55
1 files changed, 55 insertions, 0 deletions
diff --git a/dts/Bindings/net/xilinx_axienet.txt b/dts/Bindings/net/xilinx_axienet.txt
new file mode 100644
index 0000000000..38f9ec0767
--- /dev/null
+++ b/dts/Bindings/net/xilinx_axienet.txt
@@ -0,0 +1,55 @@
+XILINX AXI ETHERNET Device Tree Bindings
+--------------------------------------------------------
+
+Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
+provides connectivity to an external ethernet PHY supporting different
+interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
+segments of memory for buffering TX and RX, as well as the capability of
+offloading TX/RX checksum calculation off the processor.
+
+Management configuration is done through the AXI interface, while payload is
+sent and received through means of an AXI DMA controller. This driver
+includes the DMA driver code, so this driver is incompatible with AXI DMA
+driver.
+
+For more details about mdio please refer phy.txt file in the same directory.
+
+Required properties:
+- compatible : Must be one of "xlnx,axi-ethernet-1.00.a",
+ "xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
+- reg : Address and length of the IO space.
+- interrupts : Should be a list of two interrupt, TX and RX.
+- phy-handle : Should point to the external phy device.
+ See ethernet.txt file in the same directory.
+- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware
+
+Optional properties:
+- phy-mode : See ethernet.txt
+- xlnx,phy-type : Deprecated, do not use, but still accepted in preference
+ to phy-mode.
+- xlnx,txcsum : 0 or empty for disabling TX checksum offload,
+ 1 to enable partial TX checksum offload,
+ 2 to enable full TX checksum offload
+- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload
+
+Example:
+ axi_ethernet_eth: ethernet@40c00000 {
+ compatible = "xlnx,axi-ethernet-1.00.a";
+ device_type = "network";
+ interrupt-parent = <&microblaze_0_axi_intc>;
+ interrupts = <2 0>;
+ phy-mode = "mii";
+ reg = <0x40c00000 0x40000>;
+ xlnx,rxcsum = <0x2>;
+ xlnx,rxmem = <0x800>;
+ xlnx,txcsum = <0x2>;
+ phy-handle = <&phy0>;
+ axi_ethernetlite_0_mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@0 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };