summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/net')
-rw-r--r--dts/Bindings/net/btusb.txt3
-rw-r--r--dts/Bindings/net/cpsw-phy-sel.txt2
-rw-r--r--dts/Bindings/net/dsa/dsa.txt5
-rw-r--r--dts/Bindings/net/dsa/ksz.txt145
-rw-r--r--dts/Bindings/net/dsa/mt7530.txt6
-rw-r--r--dts/Bindings/net/fsl-enetc.txt69
-rw-r--r--dts/Bindings/net/macb.txt4
-rw-r--r--dts/Bindings/net/marvell-armada-370-neta.txt2
-rw-r--r--dts/Bindings/net/mdio-mux-multiplexer.txt82
-rw-r--r--dts/Bindings/net/mediatek-bluetooth.txt64
-rw-r--r--dts/Bindings/net/nixge.txt72
-rw-r--r--dts/Bindings/net/qcom,ethqos.txt64
-rw-r--r--dts/Bindings/net/stm32-dwmac.txt9
-rw-r--r--dts/Bindings/net/wireless/mediatek,mt76.txt19
14 files changed, 479 insertions, 67 deletions
diff --git a/dts/Bindings/net/btusb.txt b/dts/Bindings/net/btusb.txt
index 37d67926dd..b1ad6ee68e 100644
--- a/dts/Bindings/net/btusb.txt
+++ b/dts/Bindings/net/btusb.txt
@@ -9,6 +9,9 @@ Required properties:
(more may be added later) are:
"usb1286,204e" (Marvell 8997)
+ "usbcf3,e300" (Qualcomm QCA6174A)
+ "usb4ca,301a" (Qualcomm QCA6174A (Lite-On))
+
Also, vendors that use btusb may have device additional properties, e.g:
Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
diff --git a/dts/Bindings/net/cpsw-phy-sel.txt b/dts/Bindings/net/cpsw-phy-sel.txt
index 764c0c79b4..5d76f991c0 100644
--- a/dts/Bindings/net/cpsw-phy-sel.txt
+++ b/dts/Bindings/net/cpsw-phy-sel.txt
@@ -1,4 +1,4 @@
-TI CPSW Phy mode Selection Device Tree Bindings
+TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED)
-----------------------------------------------
Required properties:
diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt
index 35694c0c37..d66a5292b9 100644
--- a/dts/Bindings/net/dsa/dsa.txt
+++ b/dts/Bindings/net/dsa/dsa.txt
@@ -71,6 +71,10 @@ properties, described in binding documents:
Documentation/devicetree/bindings/net/fixed-link.txt
for details.
+- local-mac-address : See
+ Documentation/devicetree/bindings/net/ethernet.txt
+ for details.
+
Example
The following example shows three switches on three MDIO busses,
@@ -97,6 +101,7 @@ linked into one DSA cluster.
port@1 {
reg = <1>;
label = "lan1";
+ local-mac-address = [00 00 00 00 00 00];
};
port@2 {
diff --git a/dts/Bindings/net/dsa/ksz.txt b/dts/Bindings/net/dsa/ksz.txt
index 0f407fb371..e7db7268fd 100644
--- a/dts/Bindings/net/dsa/ksz.txt
+++ b/dts/Bindings/net/dsa/ksz.txt
@@ -7,6 +7,11 @@ Required properties:
of the following:
- "microchip,ksz9477"
- "microchip,ksz9897"
+ - "microchip,ksz9896"
+ - "microchip,ksz9567"
+ - "microchip,ksz8565"
+ - "microchip,ksz9893"
+ - "microchip,ksz9563"
Optional properties:
@@ -19,58 +24,96 @@ Examples:
Ethernet switch connected via SPI to the host, CPU port wired to eth0:
- eth0: ethernet@10001000 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
+ eth0: ethernet@10001000 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
- spi1: spi@f8008000 {
- pinctrl-0 = <&pinctrl_spi_ksz>;
- cs-gpios = <&pioC 25 0>;
- id = <1>;
+ spi1: spi@f8008000 {
+ pinctrl-0 = <&pinctrl_spi_ksz>;
+ cs-gpios = <&pioC 25 0>;
+ id = <1>;
- ksz9477: ksz9477@0 {
- compatible = "microchip,ksz9477";
- reg = <0>;
+ ksz9477: ksz9477@0 {
+ compatible = "microchip,ksz9477";
+ reg = <0>;
- spi-max-frequency = <44000000>;
- spi-cpha;
- spi-cpol;
+ spi-max-frequency = <44000000>;
+ spi-cpha;
+ spi-cpol;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan1";
- };
- port@1 {
- reg = <1>;
- label = "lan2";
- };
- port@2 {
- reg = <2>;
- label = "lan3";
- };
- port@3 {
- reg = <3>;
- label = "lan4";
- };
- port@4 {
- reg = <4>;
- label = "lan5";
- };
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <&eth0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ ksz8565: ksz8565@0 {
+ compatible = "microchip,ksz8565";
+ reg = <0>;
+
+ spi-max-frequency = <44000000>;
+ spi-cpha;
+ spi-cpol;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&eth0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
diff --git a/dts/Bindings/net/dsa/mt7530.txt b/dts/Bindings/net/dsa/mt7530.txt
index aa3527f71f..47aa205ee0 100644
--- a/dts/Bindings/net/dsa/mt7530.txt
+++ b/dts/Bindings/net/dsa/mt7530.txt
@@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch
Required properties:
-- compatible: Must be compatible = "mediatek,mt7530";
+- compatible: may be compatible = "mediatek,mt7530"
+ or compatible = "mediatek,mt7621"
- #address-cells: Must be 1.
- #size-cells: Must be 0.
- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
on multi-chip module belong to MT7623A has or the remotely standalone
chip as the function MT7623N reference board provided for.
+
+If compatible mediatek,mt7530 is set then the following properties are required
+
- core-supply: Phandle to the regulator node necessary for the core power.
- io-supply: Phandle to the regulator node necessary for the I/O power.
See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/dts/Bindings/net/fsl-enetc.txt b/dts/Bindings/net/fsl-enetc.txt
new file mode 100644
index 0000000000..c812e25ae9
--- /dev/null
+++ b/dts/Bindings/net/fsl-enetc.txt
@@ -0,0 +1,69 @@
+* ENETC ethernet device tree bindings
+
+Depending on board design and ENETC port type (internal or
+external) there are two supported link modes specified by
+below device tree bindings.
+
+Required properties:
+
+- reg : Specifies PCIe Device Number and Function
+ Number of the ENETC endpoint device, according
+ to parent node bindings.
+- compatible : Should be "fsl,enetc".
+
+1) The ENETC external port is connected to a MDIO configurable phy:
+
+In this case, the ENETC node should include a "mdio" sub-node
+that in turn should contain the "ethernet-phy" node describing the
+external phy. Below properties are required, their bindings
+already defined in ethernet.txt or phy.txt, under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- phy-handle : Phandle to a PHY on the MDIO bus.
+ Defined in ethernet.txt.
+
+- phy-connection-type : Defined in ethernet.txt.
+
+- mdio : "mdio" node, defined in mdio.txt.
+
+- ethernet-phy : "ethernet-phy" node, defined in phy.txt.
+
+Example:
+
+ ethernet@0,0 {
+ compatible = "fsl,enetc";
+ reg = <0x000000 0 0 0 0>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy0: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+ };
+
+2) The ENETC port is an internal port or has a fixed-link external
+connection:
+
+In this case, the ENETC port node defines a fixed link connection,
+as specified by "fixed-link.txt", under
+Documentation/devicetree/bindings/net/*.
+
+Required:
+
+- fixed-link : "fixed-link" node, defined in "fixed-link.txt".
+
+Example:
+ ethernet@0,2 {
+ compatible = "fsl,enetc";
+ reg = <0x000200 0 0 0 0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt
index 3e17ac1d5d..174f292d8a 100644
--- a/dts/Bindings/net/macb.txt
+++ b/dts/Bindings/net/macb.txt
@@ -3,8 +3,8 @@
Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
- Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
- available on sama5d3 SoCs.
+ Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
+ Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
diff --git a/dts/Bindings/net/marvell-armada-370-neta.txt b/dts/Bindings/net/marvell-armada-370-neta.txt
index bedcfd5a52..691f886cfc 100644
--- a/dts/Bindings/net/marvell-armada-370-neta.txt
+++ b/dts/Bindings/net/marvell-armada-370-neta.txt
@@ -19,7 +19,7 @@ Optional properties:
"marvell,armada-370-neta" and 9800B for others.
- clock-names: List of names corresponding to clocks property; shall be
"core" for core clock and "bus" for the optional bus clock.
-
+- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt
Optional properties (valid only for Armada XP/38x):
diff --git a/dts/Bindings/net/mdio-mux-multiplexer.txt b/dts/Bindings/net/mdio-mux-multiplexer.txt
new file mode 100644
index 0000000000..534e38058f
--- /dev/null
+++ b/dts/Bindings/net/mdio-mux-multiplexer.txt
@@ -0,0 +1,82 @@
+Properties for an MDIO bus multiplexer consumer device
+
+This is a special case of MDIO mux when MDIO mux is defined as a consumer
+of a mux producer device. The mux producer can be of any type like mmio mux
+producer, gpio mux producer or generic register based mux producer.
+
+Required properties in addition to the MDIO Bus multiplexer properties:
+
+- compatible : should be "mmio-mux-multiplexer"
+- mux-controls : mux controller node to use for operating the mux
+- mdio-parent-bus : phandle to the parent MDIO bus.
+
+each child node of mdio bus multiplexer consumer device represent a mdio
+bus.
+
+for more information please refer
+Documentation/devicetree/bindings/mux/mux-controller.txt
+and Documentation/devicetree/bindings/net/mdio-mux.txt
+
+Example:
+In below example the Mux producer and consumer are separate nodes.
+
+&i2c0 {
+ fpga@66 { // fpga connected to i2c
+ compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+ "simple-mfd";
+ reg = <0x66>;
+
+ mux: mux-controller { // Mux Producer
+ compatible = "reg-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+ <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+ };
+ };
+};
+
+mdio-mux-1 { // Mux consumer
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux 0>;
+ mdio-parent-bus = <&emdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@8 {
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ..
+ ..
+};
+
+mdio-mux-2 { // Mux consumer
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux 1>;
+ mdio-parent-bus = <&emdio2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ..
+ ..
+};
diff --git a/dts/Bindings/net/mediatek-bluetooth.txt b/dts/Bindings/net/mediatek-bluetooth.txt
index 14ceb2a5b4..41a7dcc80f 100644
--- a/dts/Bindings/net/mediatek-bluetooth.txt
+++ b/dts/Bindings/net/mediatek-bluetooth.txt
@@ -33,3 +33,67 @@ Example:
clock-names = "ref";
};
};
+
+MediaTek UART based Bluetooth Devices
+==================================
+
+This device is a serial attached device to UART device and thus it must be a
+child node of the serial node with UART.
+
+Please refer to the following documents for generic properties:
+
+ Documentation/devicetree/bindings/serial/slave-device.txt
+
+Required properties:
+
+- compatible: Must be
+ "mediatek,mt7663u-bluetooth": for MT7663U device
+ "mediatek,mt7668u-bluetooth": for MT7668U device
+- vcc-supply: Main voltage regulator
+- pinctrl-names: Should be "default", "runtime"
+- pinctrl-0: Should contain UART RXD low when the device is powered up to
+ enter proper bootstrap mode.
+- pinctrl-1: Should contain UART mode pin ctrl
+
+Optional properties:
+
+- reset-gpios: GPIO used to reset the device whose initial state keeps low,
+ if the GPIO is missing, then board-level design should be
+ guaranteed.
+- current-speed: Current baud rate of the device whose defaults to 921600
+
+Example:
+
+ uart1_pins_boot: uart1-default {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_GPIO81>;
+ output-low;
+ };
+ };
+
+ uart1_pins_runtime: uart1-runtime {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt7623-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>,
+ <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
+
+ bluetooth {
+ compatible = "mediatek,mt7663u-bluetooth";
+ vcc-supply = <&reg_5v>;
+ reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "runtime";
+ pinctrl-0 = <&uart1_pins_boot>;
+ pinctrl-1 = <&uart1_pins_runtime>;
+ current-speed = <921600>;
+ };
+ };
diff --git a/dts/Bindings/net/nixge.txt b/dts/Bindings/net/nixge.txt
index e55af7f088..85d7240a9b 100644
--- a/dts/Bindings/net/nixge.txt
+++ b/dts/Bindings/net/nixge.txt
@@ -1,17 +1,53 @@
* NI XGE Ethernet controller
Required properties:
-- compatible: Should be "ni,xge-enet-2.00"
-- reg: Address and length of the register set for the device
+- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
+ older device trees with DMA engines co-located in the address map,
+ with the one reg entry to describe the whole device.
+- reg: Address and length of the register set for the device. It contains the
+ information of registers in the same order as described by reg-names.
+- reg-names: Should contain the reg names
+ "dma": DMA engine control and status region
+ "ctrl": MDIO and PHY control and status region
- interrupts: Should contain tx and rx interrupt
- interrupt-names: Should be "rx" and "tx"
- phy-mode: See ethernet.txt file in the same directory.
-- phy-handle: See ethernet.txt file in the same directory.
- nvmem-cells: Phandle of nvmem cell containing the MAC address
- nvmem-cell-names: Should be "address"
+Optional properties:
+- mdio subnode to indicate presence of MDIO controller
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+ Use instead of phy-handle.
+- phy-handle: See ethernet.txt file in the same directory.
+
Examples (10G generic PHY):
nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-3.00";
+ reg = <0x40000000 0x4000
+ 0x41002000 0x2000>;
+ reg-names = "dma", "ctrl";
+
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+ phy-handle = <&ethernet_phy1>;
+
+ mdio {
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
+ };
+
+Examples (10G generic PHY, no MDIO):
+ nixge0: ethernet@40000000 {
compatible = "ni,xge-enet-2.00";
reg = <0x40000000 0x6000>;
@@ -24,9 +60,33 @@ Examples (10G generic PHY):
phy-mode = "xgmii";
phy-handle = <&ethernet_phy1>;
+ };
+
+Examples (1G generic fixed-link + MDIO):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-2.00";
+ reg = <0x40000000 0x6000>;
- ethernet_phy1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <4>;
+ nvmem-cells = <&eth1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+
+ fixed-link {
+ speed = <1000>;
+ pause;
+ link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>;
+ };
+
+ mdio {
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
};
+
};
diff --git a/dts/Bindings/net/qcom,ethqos.txt b/dts/Bindings/net/qcom,ethqos.txt
new file mode 100644
index 0000000000..fcf5035810
--- /dev/null
+++ b/dts/Bindings/net/qcom,ethqos.txt
@@ -0,0 +1,64 @@
+Qualcomm Ethernet ETHQOS device
+
+This documents dwmmac based ethernet device which supports Gigabit
+ethernet for version v2.3.0 onwards.
+
+This device has following properties:
+
+Required properties:
+
+- compatible: Should be qcom,qcs404-ethqos"
+
+- reg: Address and length of the register set for the device
+
+- reg-names: Should contain register names "stmmaceth", "rgmii"
+
+- clocks: Should contain phandle to clocks
+
+- clock-names: Should contain clock names "stmmaceth", "pclk",
+ "ptp_ref", "rgmii"
+
+- interrupts: Should contain phandle to interrupts
+
+- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
+
+Rest of the properties are defined in stmmac.txt file in same directory
+
+
+Example:
+
+ethernet: ethernet@7a80000 {
+ compatible = "qcom,qcs404-ethqos";
+ reg = <0x07a80000 0x10000>,
+ <0x07a96000 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_ETH_AXI_CLK>,
+ <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+ <&gcc GCC_ETH_PTP_CLK>,
+ <&gcc GCC_ETH_RGMII_CLK>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+
+ snps,txpbl = <8>;
+ snps,rxpbl = <2>;
+ snps,aal;
+ snps,tso;
+
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: phy@4 {
+ device_type = "ethernet-phy";
+ reg = <0x4>;
+ };
+ };
+
+};
diff --git a/dts/Bindings/net/stm32-dwmac.txt b/dts/Bindings/net/stm32-dwmac.txt
index 1341012722..a90eef11dc 100644
--- a/dts/Bindings/net/stm32-dwmac.txt
+++ b/dts/Bindings/net/stm32-dwmac.txt
@@ -14,8 +14,7 @@ Required properties:
- clock-names: Should be "stmmaceth" for the host clock.
Should be "mac-clk-tx" for the MAC TX clock.
Should be "mac-clk-rx" for the MAC RX clock.
- For MPU family need to add also "ethstp" for power mode clock and,
- "syscfg-clk" for SYSCFG clock.
+ For MPU family need to add also "ethstp" for power mode clock
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Should be "macirq" for the main MAC IRQ
@@ -24,9 +23,9 @@ Required properties:
encompases the glue register, and the offset of the control register.
Optional properties:
-- clock-names: For MPU family "mac-clk-ck" for PHY without quartz
-- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock
- by RCC
+- clock-names: For MPU family "eth-ck" for PHY without quartz
+- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
Example:
diff --git a/dts/Bindings/net/wireless/mediatek,mt76.txt b/dts/Bindings/net/wireless/mediatek,mt76.txt
index 0c17a0ec9b..7b9a776230 100644
--- a/dts/Bindings/net/wireless/mediatek,mt76.txt
+++ b/dts/Bindings/net/wireless/mediatek,mt76.txt
@@ -4,6 +4,13 @@ This node provides properties for configuring the MediaTek mt76xx wireless
device. The node is expected to be specified as a child node of the PCI
controller to which the wireless chip is connected.
+Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC.
+For SoC, use the compatible string "mediatek,mt7628-wmac" and the following
+properties:
+
+- reg: Address and length of the register set for the device.
+- interrupts: Main device interrupt
+
Optional properties:
- mac-address: See ethernet.txt in the parent directory
@@ -30,3 +37,15 @@ Optional nodes:
};
};
};
+
+MT7628 example:
+
+wmac: wmac@10300000 {
+ compatible = "mediatek,mt7628-wmac";
+ reg = <0x10300000 0x100000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-25 12:00:29 +0000