diff options
Diffstat (limited to 'dts/Bindings/net')
| -rw-r--r-- | dts/Bindings/net/dsa/nxp,sja1105.yaml | 4 | ||||
| -rw-r--r-- | dts/Bindings/net/gpmc-eth.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/net/smsc,lan9115.yaml | 110 | ||||
| -rw-r--r-- | dts/Bindings/net/smsc911x.txt | 43 |
4 files changed, 113 insertions, 46 deletions
diff --git a/dts/Bindings/net/dsa/nxp,sja1105.yaml b/dts/Bindings/net/dsa/nxp,sja1105.yaml index 0b8a05dd52..f978f8719d 100644 --- a/dts/Bindings/net/dsa/nxp,sja1105.yaml +++ b/dts/Bindings/net/dsa/nxp,sja1105.yaml @@ -67,8 +67,8 @@ properties: reg: oneOf: - enum: - - 0 - - 1 + - 0 + - 1 required: - compatible diff --git a/dts/Bindings/net/gpmc-eth.txt b/dts/Bindings/net/gpmc-eth.txt index f7da3d73ca..32821066a8 100644 --- a/dts/Bindings/net/gpmc-eth.txt +++ b/dts/Bindings/net/gpmc-eth.txt @@ -13,7 +13,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt +for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml Child nodes need to specify the GPMC bus address width using the "bank-width" property but is possible that an ethernet controller also has a property to diff --git a/dts/Bindings/net/smsc,lan9115.yaml b/dts/Bindings/net/smsc,lan9115.yaml new file mode 100644 index 0000000000..f86667cbcc --- /dev/null +++ b/dts/Bindings/net/smsc,lan9115.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + oneOf: + - const: smsc,lan9115 + - items: + - enum: + - smsc,lan89218 + - smsc,lan9117 + - smsc,lan9118 + - smsc,lan9220 + - smsc,lan9221 + - const: smsc,lan9115 + + reg: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 2, 4 ] + default: 2 + + interrupts: + minItems: 1 + items: + - description: + LAN interrupt line + - description: + Optional PME (power management event) interrupt that is able to wake + up the host system with a 50ms pulse on network activity + + clocks: + maxItems: 1 + + phy-mode: true + + smsc,irq-active-high: + type: boolean + description: Indicates the IRQ polarity is active-high + + smsc,irq-push-pull: + type: boolean + description: Indicates the IRQ type is push-pull + + smsc,force-internal-phy: + type: boolean + description: Forces SMSC LAN controller to use internal PHY + + smsc,force-external-phy: + type: boolean + description: Forces SMSC LAN controller to use external PHY + + smsc,save-mac-address: + type: boolean + description: + Indicates that MAC address needs to be saved before resetting the + controller + + reset-gpios: + maxItems: 1 + description: + A GPIO line connected to the RESET (active low) signal of the device. + On many systems this is wired high so the device goes out of reset at + power-on, but if it is under program control, this optional GPIO can + wake up in response to it. + + vdd33a-supply: + description: 3.3V analog power supply + + vddvario-supply: + description: IO logic power supply + +required: + - compatible + - reg + - interrupts + +# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*", +# "gpmc,*", ...) to be found, that actually depend on the compatible value of +# the parent node. +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + ethernet@f4000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0xf4000000 0x2000000>; + phy-mode = "mii"; + interrupt-parent = <&gpio1>; + interrupts = <31>, <32>; + reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,irq-push-pull; + }; diff --git a/dts/Bindings/net/smsc911x.txt b/dts/Bindings/net/smsc911x.txt deleted file mode 100644 index acfafc8e14..0000000000 --- a/dts/Bindings/net/smsc911x.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller - -Required properties: -- compatible : Should be "smsc,lan<model>", "smsc,lan9115" -- reg : Address and length of the io space for SMSC LAN -- interrupts : one or two interrupt specifiers - - The first interrupt is the SMSC LAN interrupt line - - The second interrupt (if present) is the PME (power - management event) interrupt that is able to wake up the host - system with a 50ms pulse on network activity -- phy-mode : See ethernet.txt file in the same directory - -Optional properties: -- reg-shift : Specify the quantity to shift the register offsets by -- reg-io-width : Specify the size (in bytes) of the IO accesses that - should be performed on the device. Valid value for SMSC LAN is - 2 or 4. If it's omitted or invalid, the size would be 2. -- smsc,irq-active-high : Indicates the IRQ polarity is active-high -- smsc,irq-push-pull : Indicates the IRQ type is push-pull -- smsc,force-internal-phy : Forces SMSC LAN controller to use - internal PHY -- smsc,force-external-phy : Forces SMSC LAN controller to use - external PHY -- smsc,save-mac-address : Indicates that mac address needs to be saved - before resetting the controller -- reset-gpios : a GPIO line connected to the RESET (active low) signal - of the device. On many systems this is wired high so the device goes - out of reset at power-on, but if it is under program control, this - optional GPIO can wake up in response to it. -- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies - -Examples: - -lan9220@f4000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0xf4000000 0x2000000>; - phy-mode = "mii"; - interrupt-parent = <&gpio1>; - interrupts = <31>, <32>; - reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - reg-io-width = <4>; - smsc,irq-push-pull; -}; |