summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/net')
-rw-r--r--dts/Bindings/net/altera_tse.txt5
-rw-r--r--dts/Bindings/net/amd-xgbe.txt5
-rw-r--r--dts/Bindings/net/brcm,amac.txt4
-rw-r--r--dts/Bindings/net/cpsw.txt4
-rw-r--r--dts/Bindings/net/davinci_emac.txt5
-rw-r--r--dts/Bindings/net/dsa/dsa.txt160
-rw-r--r--dts/Bindings/net/dsa/sja1105.txt156
-rw-r--r--dts/Bindings/net/ethernet.txt8
-rw-r--r--dts/Bindings/net/hisilicon-femac.txt4
-rw-r--r--dts/Bindings/net/hisilicon-hix5hd2-gmac.txt4
-rw-r--r--dts/Bindings/net/keystone-netcp.txt10
-rw-r--r--dts/Bindings/net/macb.txt5
-rw-r--r--dts/Bindings/net/marvell-pxa168.txt4
-rw-r--r--dts/Bindings/net/mdio-mux-meson-g12a.txt48
-rw-r--r--dts/Bindings/net/microchip,enc28j60.txt3
-rw-r--r--dts/Bindings/net/microchip,lan78xx.txt5
-rw-r--r--dts/Bindings/net/phy.txt6
-rw-r--r--dts/Bindings/net/qca,qca7000.txt4
-rw-r--r--dts/Bindings/net/qualcomm-bluetooth.txt5
-rw-r--r--dts/Bindings/net/samsung-sxgbe.txt4
-rw-r--r--dts/Bindings/net/snps,dwc-qos-ethernet.txt5
-rw-r--r--dts/Bindings/net/socionext,uniphier-ave4.txt4
-rw-r--r--dts/Bindings/net/socionext-netsec.txt5
-rw-r--r--dts/Bindings/net/wireless/mediatek,mt76.txt5
-rw-r--r--dts/Bindings/net/wireless/qca,ath9k.txt4
25 files changed, 272 insertions, 200 deletions
diff --git a/dts/Bindings/net/altera_tse.txt b/dts/Bindings/net/altera_tse.txt
index 0e21df9..0b7d4d3 100644
--- a/dts/Bindings/net/altera_tse.txt
+++ b/dts/Bindings/net/altera_tse.txt
@@ -46,9 +46,8 @@ Required properties:
- reg: phy id used to communicate to phy.
- device_type: Must be "ethernet-phy".
-Optional properties:
-- local-mac-address: See ethernet.txt in the same directory.
-- max-frame-size: See ethernet.txt in the same directory.
+The MAC address will be determined using the optional properties defined in
+ethernet.txt.
Example:
diff --git a/dts/Bindings/net/amd-xgbe.txt b/dts/Bindings/net/amd-xgbe.txt
index 93dcb79..9c27dfc 100644
--- a/dts/Bindings/net/amd-xgbe.txt
+++ b/dts/Bindings/net/amd-xgbe.txt
@@ -24,8 +24,6 @@ Required properties:
- phy-mode: See ethernet.txt file in the same directory
Optional properties:
-- mac-address: mac address to be assigned to the device. Can be overridden
- by UEFI.
- dma-coherent: Present if dma operations are coherent
- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
a unique interrupt for each DMA channel - this requires an additional
@@ -34,6 +32,9 @@ Optional properties:
0 - 1GbE and 10GbE (default)
1 - 2.5GbE and 10GbE
+The MAC address will be determined using the optional properties defined in
+ethernet.txt.
+
The following optional properties are represented by an array with each
value corresponding to a particular speed. The first array value represents
the setting for the 1GbE speed, the second value for the 2.5GbE speed and
diff --git a/dts/Bindings/net/brcm,amac.txt b/dts/Bindings/net/brcm,amac.txt
index 0bfad65..0120ebe 100644
--- a/dts/Bindings/net/brcm,amac.txt
+++ b/dts/Bindings/net/brcm,amac.txt
@@ -16,8 +16,8 @@ Required properties:
registers (required for Northstar2)
- interrupts: Interrupt number
-Optional properties:
-- mac-address: See ethernet.txt file in the same directory
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Examples:
diff --git a/dts/Bindings/net/cpsw.txt b/dts/Bindings/net/cpsw.txt
index 3264e19..7c7ac5e 100644
--- a/dts/Bindings/net/cpsw.txt
+++ b/dts/Bindings/net/cpsw.txt
@@ -49,10 +49,12 @@ Required properties:
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
-- mac-address : See ethernet.txt file in the same directory
- phy_id : Specifies slave phy id (deprecated, use phy-handle)
- phy-handle : See ethernet.txt file in the same directory
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
Slave sub-nodes:
- fixed-link : See fixed-link.txt file in the same directory
diff --git a/dts/Bindings/net/davinci_emac.txt b/dts/Bindings/net/davinci_emac.txt
index ca83dcc..5e3579e 100644
--- a/dts/Bindings/net/davinci_emac.txt
+++ b/dts/Bindings/net/davinci_emac.txt
@@ -20,11 +20,12 @@ Required properties:
Optional properties:
- phy-handle: See ethernet.txt file in the same directory.
If absent, davinci_emac driver defaults to 100/FULL.
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
- ti,davinci-rmii-en: 1 byte, 1 means use RMII
- ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
Example (enbw_cmc board):
eth0: emac@1e20000 {
compatible = "ti,davinci-dm6467-emac";
diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt
index d66a529..f66bb7e 100644
--- a/dts/Bindings/net/dsa/dsa.txt
+++ b/dts/Bindings/net/dsa/dsa.txt
@@ -1,12 +1,6 @@
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------
-Two bindings exist, one of which has been deprecated due to
-limitations.
-
-Current Binding
----------------
-
Switches are true Linux devices and can be probed by any means. Once
probed, they register to the DSA framework, passing a node
pointer. This node is expected to fulfil the following binding, and
@@ -71,9 +65,8 @@ properties, described in binding documents:
Documentation/devicetree/bindings/net/fixed-link.txt
for details.
-- local-mac-address : See
- Documentation/devicetree/bindings/net/ethernet.txt
- for details.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Example
@@ -262,152 +255,3 @@ linked into one DSA cluster.
};
};
};
-
-Deprecated Binding
-------------------
-
-The deprecated binding makes use of a platform device to represent the
-switches. The switches themselves are not Linux devices, and make use
-of an MDIO bus for management.
-
-Required properties:
-- compatible : Should be "marvell,dsa"
-- #address-cells : Must be 2, first cell is the address on the MDIO bus
- and second cell is the address in the switch tree.
- Second cell is used only when cascading/chaining.
-- #size-cells : Must be 0
-- dsa,ethernet : Should be a phandle to a valid Ethernet device node
-- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
-
-Optional properties:
-- interrupts : property with a value describing the switch
- interrupt number (not supported by the driver)
-
-A DSA node can contain multiple switch chips which are therefore child nodes of
-the parent DSA node. The maximum number of allowed child nodes is 4
-(DSA_MAX_SWITCHES).
-Each of these switch child nodes should have the following required properties:
-
-- reg : Contains two fields. The first one describes the
- address on the MII bus. The second is the switch
- number that must be unique in cascaded configurations
-- #address-cells : Must be 1
-- #size-cells : Must be 0
-
-A switch child node has the following optional property:
-
-- eeprom-length : Set to the length of an EEPROM connected to the
- switch. Must be set if the switch can not detect
- the presence and/or size of a connected EEPROM,
- otherwise optional.
-
-A switch may have multiple "port" children nodes
-
-Each port children node must have the following mandatory properties:
-- reg : Describes the port address in the switch
-- label : Describes the label associated with this port, special
- labels are "cpu" to indicate a CPU port and "dsa" to
- indicate an uplink/downlink port.
-
-Note that a port labelled "dsa" will imply checking for the uplink phandle
-described below.
-
-Optional property:
-- link : Should be a list of phandles to another switch's DSA port.
- This property is only used when switches are being
- chained/cascaded together. This port is used as outgoing port
- towards the phandle port, which can be more than one hop away.
-
-- phy-handle : Phandle to a PHY on an external MDIO bus, not the
- switch internal one. See
- Documentation/devicetree/bindings/net/ethernet.txt
- for details.
-
-- phy-mode : String representing the connection to the designated
- PHY node specified by the 'phy-handle' property. See
- Documentation/devicetree/bindings/net/ethernet.txt
- for details.
-
-- mii-bus : Should be a phandle to a valid MDIO bus device node.
- This mii-bus will be used in preference to the
- global dsa,mii-bus defined above, for this switch.
-
-Optional subnodes:
-- fixed-link : Fixed-link subnode describing a link to a non-MDIO
- managed entity. See
- Documentation/devicetree/bindings/net/fixed-link.txt
- for details.
-
-Example:
-
- dsa@0 {
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- interrupts = <10>;
- dsa,ethernet = <&ethernet0>;
- dsa,mii-bus = <&mii_bus0>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <16 0>; /* MDIO address 16, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan1";
- phy-handle = <&phy0>;
- };
-
- port@1 {
- reg = <1>;
- label = "lan2";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
-
- switch0port6: port@6 {
- reg = <6>;
- label = "dsa";
- link = <&switch1port0
- &switch2port0>;
- };
- };
-
- switch@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <17 1>; /* MDIO address 17, switch 1 in tree */
- mii-bus = <&mii_bus1>;
- reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-
- switch1port0: port@0 {
- reg = <0>;
- label = "dsa";
- link = <&switch0port6>;
- };
- switch1port1: port@1 {
- reg = <1>;
- label = "dsa";
- link = <&switch2port1>;
- };
- };
-
- switch@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <18 2>; /* MDIO address 18, switch 2 in tree */
- mii-bus = <&mii_bus1>;
-
- switch2port0: port@0 {
- reg = <0>;
- label = "dsa";
- link = <&switch1port1
- &switch0port6>;
- };
- };
- };
diff --git a/dts/Bindings/net/dsa/sja1105.txt b/dts/Bindings/net/dsa/sja1105.txt
new file mode 100644
index 0000000..13fd210
--- /dev/null
+++ b/dts/Bindings/net/dsa/sja1105.txt
@@ -0,0 +1,156 @@
+NXP SJA1105 switch driver
+=========================
+
+Required properties:
+
+- compatible:
+ Must be one of:
+ - "nxp,sja1105e"
+ - "nxp,sja1105t"
+ - "nxp,sja1105p"
+ - "nxp,sja1105q"
+ - "nxp,sja1105r"
+ - "nxp,sja1105s"
+
+ Although the device ID could be detected at runtime, explicit bindings
+ are required in order to be able to statically check their validity.
+ For example, SGMII can only be specified on port 4 of R and S devices,
+ and the non-SGMII devices, while pin-compatible, are not equal in terms
+ of support for RGMII internal delays (supported on P/Q/R/S, but not on
+ E/T).
+
+Optional properties:
+
+- sja1105,role-mac:
+- sja1105,role-phy:
+ Boolean properties that can be assigned under each port node. By
+ default (unless otherwise specified) a port is configured as MAC if it
+ is driving a PHY (phy-handle is present) or as PHY if it is PHY-less
+ (fixed-link specified, presumably because it is connected to a MAC).
+ The effect of this property (in either its implicit or explicit form)
+ is:
+ - In the case of MII or RMII it specifies whether the SJA1105 port is a
+ clock source or sink for this interface (not applicable for RGMII
+ where there is a Tx and an Rx clock).
+ - In the case of RGMII it affects the behavior regarding internal
+ delays:
+ 1. If sja1105,role-mac is specified, and the phy-mode property is one
+ of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity
+ designated to apply the delay/clock skew necessary for RGMII
+ is the PHY. The SJA1105 MAC does not apply any internal delays.
+ 2. If sja1105,role-phy is specified, and the phy-mode property is one
+ of the above, the designated entity to apply the internal delays
+ is the SJA1105 MAC (if hardware-supported). This is only supported
+ by the second-generation (P/Q/R/S) hardware. On a first-generation
+ E or T device, it is an error to specify an RGMII phy-mode other
+ than "rgmii" for a port that is in fixed-link mode. In that case,
+ the clock skew must either be added by the MAC at the other end of
+ the fixed-link, or by PCB serpentine traces on the board.
+ These properties are required, for example, in the case where SJA1105
+ ports are at both ends of a MII/RMII PHY-less setup. One end would need
+ to have sja1105,role-mac, while the other sja1105,role-phy.
+
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard
+DSA required and optional properties.
+
+Other observations
+------------------
+
+The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least
+one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
+cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
+depends on the SPI bus master driver.
+
+Example
+-------
+
+Ethernet switch connected via SPI to the host, CPU port wired to enet2:
+
+arch/arm/boot/dts/ls1021a-tsn.dts:
+
+/* SPI controller of the LS1021 */
+&dspi0 {
+ sja1105@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,sja1105t";
+ spi-max-frequency = <4000000>;
+ fsl,spi-cs-sck-delay = <1000>;
+ fsl,spi-sck-cs-delay = <1000>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ /* ETH5 written on chassis */
+ label = "swp5";
+ phy-handle = <&rgmii_phy6>;
+ phy-mode = "rgmii-id";
+ reg = <0>;
+ /* Implicit "sja1105,role-mac;" */
+ };
+ port@1 {
+ /* ETH2 written on chassis */
+ label = "swp2";
+ phy-handle = <&rgmii_phy3>;
+ phy-mode = "rgmii-id";
+ reg = <1>;
+ /* Implicit "sja1105,role-mac;" */
+ };
+ port@2 {
+ /* ETH3 written on chassis */
+ label = "swp3";
+ phy-handle = <&rgmii_phy4>;
+ phy-mode = "rgmii-id";
+ reg = <2>;
+ /* Implicit "sja1105,role-mac;" */
+ };
+ port@3 {
+ /* ETH4 written on chassis */
+ phy-handle = <&rgmii_phy5>;
+ label = "swp4";
+ phy-mode = "rgmii-id";
+ reg = <3>;
+ /* Implicit "sja1105,role-mac;" */
+ };
+ port@4 {
+ /* Internal port connected to eth2 */
+ ethernet = <&enet2>;
+ phy-mode = "rgmii";
+ reg = <4>;
+ /* Implicit "sja1105,role-phy;" */
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+/* MDIO controller of the LS1021 */
+&mdio0 {
+ /* BCM5464 */
+ rgmii_phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ rgmii_phy4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ rgmii_phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ rgmii_phy6: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+};
+
+/* Ethernet master port of the LS1021 */
+&enet2 {
+ phy-connection-type = "rgmii";
+ status = "ok";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
diff --git a/dts/Bindings/net/ethernet.txt b/dts/Bindings/net/ethernet.txt
index a686215..e88c364 100644
--- a/dts/Bindings/net/ethernet.txt
+++ b/dts/Bindings/net/ethernet.txt
@@ -4,12 +4,14 @@ NOTE: All 'phy*' properties documented below are Ethernet specific. For the
generic PHY 'phys' property, see
Documentation/devicetree/bindings/phy/phy-bindings.txt.
-- local-mac-address: array of 6 bytes, specifies the MAC address that was
- assigned to the network device;
- mac-address: array of 6 bytes, specifies the MAC address that was last used by
the boot program; should be used in cases where the MAC address assigned to
the device by the boot program is different from the "local-mac-address"
property;
+- local-mac-address: array of 6 bytes, specifies the MAC address that was
+ assigned to the network device;
+- nvmem-cells: phandle, reference to an nvmem node for the MAC address
+- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
the maximum frame size (there's contradiction in the Devicetree
@@ -36,7 +38,7 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt.
* "smii"
* "xgmii"
* "trgmii"
- * "2000base-x",
+ * "1000base-x",
* "2500base-x",
* "rxaui"
* "xaui"
diff --git a/dts/Bindings/net/hisilicon-femac.txt b/dts/Bindings/net/hisilicon-femac.txt
index d11af5e..5f96976 100644
--- a/dts/Bindings/net/hisilicon-femac.txt
+++ b/dts/Bindings/net/hisilicon-femac.txt
@@ -14,7 +14,6 @@ Required properties:
the PHY reset signal(optional).
- reset-names: should contain the reset signal name "mac"(required)
and "phy"(optional).
-- mac-address: see ethernet.txt [1].
- phy-mode: see ethernet.txt [1].
- phy-handle: see ethernet.txt [1].
- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
@@ -22,6 +21,9 @@ Required properties:
The 2nd cell is reset pulse in micro seconds.
The 3rd cell is reset post-delay in micro seconds.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt[1].
+
[1] Documentation/devicetree/bindings/net/ethernet.txt
Example:
diff --git a/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt b/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt
index eea73ad..cddf46b 100644
--- a/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt
+++ b/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt
@@ -18,7 +18,6 @@ Required properties:
- #size-cells: must be <0>.
- phy-mode: see ethernet.txt [1].
- phy-handle: see ethernet.txt [1].
-- mac-address: see ethernet.txt [1].
- clocks: clock phandle and specifier pair.
- clock-names: contain the clock name "mac_core"(required) and "mac_ifc"(optional).
- resets: should contain the phandle to the MAC core reset signal(optional),
@@ -31,6 +30,9 @@ Required properties:
The 2nd cell is reset pulse in micro seconds.
The 3rd cell is reset post-delay in micro seconds.
+The MAC address will be determined using the properties defined in
+ethernet.txt[1].
+
- PHY subnode: inherits from phy binding [2]
[1] Documentation/devicetree/bindings/net/ethernet.txt
diff --git a/dts/Bindings/net/keystone-netcp.txt b/dts/Bindings/net/keystone-netcp.txt
index 04ba1dc..6262c2f 100644
--- a/dts/Bindings/net/keystone-netcp.txt
+++ b/dts/Bindings/net/keystone-netcp.txt
@@ -135,14 +135,14 @@ Optional properties:
are swapped. The netcp driver will swap the two DWORDs
back to the proper order when this property is set to 2
when it obtains the mac address from efuse.
-- local-mac-address: the driver is designed to use the of_get_mac_address api
- only if efuse-mac is 0. When efuse-mac is 0, the MAC
- address is obtained from local-mac-address. If this
- attribute is not present, then the driver will use a
- random MAC address.
- "netcp-device label": phandle to the device specification for each of NetCP
sub-module attached to this interface.
+The MAC address will be determined using the optional properties defined in
+ethernet.txt and only if efuse-mac is set to 0. If all of the optional MAC
+address properties are not present, then the driver will use a random MAC
+address.
+
Example binding:
netcp: netcp@2000000 {
diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt
index 8b80515..9c5e944 100644
--- a/dts/Bindings/net/macb.txt
+++ b/dts/Bindings/net/macb.txt
@@ -26,9 +26,8 @@ Required properties:
Optional elements: 'tsu_clk'
- clocks: Phandles to input clocks.
-Optional properties:
-- nvmem-cells: phandle, reference to an nvmem node for the MAC address
-- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Optional properties for PHY child node:
- reset-gpios : Should specify the gpio for phy reset
diff --git a/dts/Bindings/net/marvell-pxa168.txt b/dts/Bindings/net/marvell-pxa168.txt
index 845a148..5574af3 100644
--- a/dts/Bindings/net/marvell-pxa168.txt
+++ b/dts/Bindings/net/marvell-pxa168.txt
@@ -11,7 +11,9 @@ Optional properties:
- #address-cells: must be 1 when using sub-nodes.
- #size-cells: must be 0 when using sub-nodes.
- phy-handle: see ethernet.txt file in the same directory.
-- local-mac-address: see ethernet.txt file in the same directory.
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Sub-nodes:
Each PHY can be represented as a sub-node. This is not mandatory.
diff --git a/dts/Bindings/net/mdio-mux-meson-g12a.txt b/dts/Bindings/net/mdio-mux-meson-g12a.txt
new file mode 100644
index 0000000..3a96cbe
--- /dev/null
+++ b/dts/Bindings/net/mdio-mux-meson-g12a.txt
@@ -0,0 +1,48 @@
+Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family.
+
+This is a special case of a MDIO bus multiplexer. It allows to choose between
+the internal mdio bus leading to the embedded 10/100 PHY or the external
+MDIO bus.
+
+Required properties in addition to the generic multiplexer properties:
+- compatible : amlogic,g12a-mdio-mux
+- reg: physical address and length of the multiplexer/glue registers
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "pclk" : peripheral clock.
+ * "clkin0" : platform crytal
+ * "clkin1" : SoC 50MHz MPLL
+
+Example :
+
+mdio_mux: mdio-multiplexer@4c000 {
+ compatible = "amlogic,g12a-mdio-mux";
+ reg = <0x0 0x4c000 0x0 0xa4>;
+ clocks = <&clkc CLKID_ETH_PHY>,
+ <&xtal>,
+ <&clkc CLKID_MPLL_5OM>;
+ clock-names = "pclk", "clkin0", "clkin1";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_mdio: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ int_mdio: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_ephy: ethernet-phy@8 {
+ compatible = "ethernet-phy-id0180.3301",
+ "ethernet-phy-ieee802.3-c22";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <8>;
+ max-speed = <100>;
+ };
+ };
+};
diff --git a/dts/Bindings/net/microchip,enc28j60.txt b/dts/Bindings/net/microchip,enc28j60.txt
index 24626e0..a827592 100644
--- a/dts/Bindings/net/microchip,enc28j60.txt
+++ b/dts/Bindings/net/microchip,enc28j60.txt
@@ -21,8 +21,9 @@ Optional properties:
- spi-max-frequency: Maximum frequency of the SPI bus when accessing the ENC28J60.
According to the ENC28J80 datasheet, the chip allows a maximum of 20 MHz, however,
board designs may need to limit this value.
-- local-mac-address: See ethernet.txt in the same directory.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Example (for NXP i.MX28 with pin control stuff for GPIO irq):
diff --git a/dts/Bindings/net/microchip,lan78xx.txt b/dts/Bindings/net/microchip,lan78xx.txt
index 76786a0..11a6795 100644
--- a/dts/Bindings/net/microchip,lan78xx.txt
+++ b/dts/Bindings/net/microchip,lan78xx.txt
@@ -7,9 +7,8 @@ The Device Tree properties, if present, override the OTP and EEPROM.
Required properties:
- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
-Optional properties:
-- local-mac-address: see ethernet.txt
-- mac-address: see ethernet.txt
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Optional properties of the embedded PHY:
- microchip,led-modes: a 0..4 element vector, with each element configuring
diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt
index 17c1d2b..9b9e5b1 100644
--- a/dts/Bindings/net/phy.txt
+++ b/dts/Bindings/net/phy.txt
@@ -51,6 +51,10 @@ Optional Properties:
to ensure the integrated PHY is used. The absence of this property indicates
the muxers should be configured so that the external PHY is used.
+- resets: The reset-controller phandle and specifier for the PHY reset signal.
+
+- reset-names: Must be "phy" for the PHY reset signal.
+
- reset-gpios: The GPIO phandle and specifier for the PHY reset signal.
- reset-assert-us: Delay after the reset was asserted in microseconds.
@@ -67,6 +71,8 @@ ethernet-phy@0 {
interrupts = <35 IRQ_TYPE_EDGE_RISING>;
reg = <0>;
+ resets = <&rst 8>;
+ reset-names = "phy";
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <2000>;
diff --git a/dts/Bindings/net/qca,qca7000.txt b/dts/Bindings/net/qca,qca7000.txt
index e4a8a51..21c36e5 100644
--- a/dts/Bindings/net/qca,qca7000.txt
+++ b/dts/Bindings/net/qca,qca7000.txt
@@ -23,7 +23,6 @@ Optional properties:
Numbers smaller than 1000000 or greater than 16000000
are invalid. Missing the property will set the SPI
frequency to 8000000 Hertz.
-- local-mac-address : see ./ethernet.txt
- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode.
In this mode the SPI master must toggle the chip select
between each data word. In burst mode these gaps aren't
@@ -31,6 +30,9 @@ Optional properties:
the QCA7000 is setup via GPIO pin strapping. If the
property is missing the driver defaults to burst mode.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
SPI Example:
/* Freescale i.MX28 SPI master*/
diff --git a/dts/Bindings/net/qualcomm-bluetooth.txt b/dts/Bindings/net/qualcomm-bluetooth.txt
index 824c0e2..7ef6118 100644
--- a/dts/Bindings/net/qualcomm-bluetooth.txt
+++ b/dts/Bindings/net/qualcomm-bluetooth.txt
@@ -11,20 +11,21 @@ Required properties:
- compatible: should contain one of the following:
* "qcom,qca6174-bt"
* "qcom,wcn3990-bt"
+ * "qcom,wcn3998-bt"
Optional properties for compatible string qcom,qca6174-bt:
- enable-gpios: gpio specifier used to enable chip
- clocks: clock provided to the controller (SUSCLK_32KHZ)
-Required properties for compatible string qcom,wcn3990-bt:
+Required properties for compatible string qcom,wcn399x-bt:
- vddio-supply: VDD_IO supply regulator handle.
- vddxo-supply: VDD_XO supply regulator handle.
- vddrf-supply: VDD_RF supply regulator handle.
- vddch0-supply: VDD_CH0 supply regulator handle.
-Optional properties for compatible string qcom,wcn3990-bt:
+Optional properties for compatible string qcom,wcn399x-bt:
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
diff --git a/dts/Bindings/net/samsung-sxgbe.txt b/dts/Bindings/net/samsung-sxgbe.txt
index 46e5911..2cff6d8 100644
--- a/dts/Bindings/net/samsung-sxgbe.txt
+++ b/dts/Bindings/net/samsung-sxgbe.txt
@@ -21,10 +21,12 @@ Required properties:
range.
Optional properties:
-- mac-address: 6 bytes, mac address
- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
than the maximum frame size.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
Example:
aliases {
diff --git a/dts/Bindings/net/snps,dwc-qos-ethernet.txt b/dts/Bindings/net/snps,dwc-qos-ethernet.txt
index 36f1aef..ad3c6e1 100644
--- a/dts/Bindings/net/snps,dwc-qos-ethernet.txt
+++ b/dts/Bindings/net/snps,dwc-qos-ethernet.txt
@@ -103,8 +103,6 @@ Required properties:
Optional properties:
- dma-coherent: Present if dma operations are coherent
-- mac-address: See ethernet.txt in the same directory
-- local-mac-address: See ethernet.txt in the same directory
- phy-reset-gpios: Phandle and specifier for any GPIO used to reset the PHY.
See ../gpio/gpio.txt.
- snps,en-lpi: If present it enables use of the AXI low-power interface
@@ -133,6 +131,9 @@ Optional properties:
- device_type: Must be "ethernet-phy".
- fixed-mode device tree subnode: see fixed-link.txt in the same directory
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
Examples:
ethernet2@40010000 {
clock-names = "phy_ref_clk", "apb_pclk";
diff --git a/dts/Bindings/net/socionext,uniphier-ave4.txt b/dts/Bindings/net/socionext,uniphier-ave4.txt
index fc8f017..4e85fc4 100644
--- a/dts/Bindings/net/socionext,uniphier-ave4.txt
+++ b/dts/Bindings/net/socionext,uniphier-ave4.txt
@@ -31,8 +31,8 @@ Required properties:
- socionext,syscon-phy-mode: A phandle to syscon with one argument
that configures phy mode. The argument is the ID of MAC instance.
-Optional properties:
- - local-mac-address: See ethernet.txt in the same directory.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
Required subnode:
- mdio: A container for child nodes representing phy nodes.
diff --git a/dts/Bindings/net/socionext-netsec.txt b/dts/Bindings/net/socionext-netsec.txt
index 0cff94f..9d6c9fe 100644
--- a/dts/Bindings/net/socionext-netsec.txt
+++ b/dts/Bindings/net/socionext-netsec.txt
@@ -26,11 +26,12 @@ Required properties:
Optional properties: (See ethernet.txt file in the same directory)
- dma-coherent: Boolean property, must only be present if memory
accesses performed by the device are cache coherent.
-- local-mac-address: See ethernet.txt in the same directory.
-- mac-address: See ethernet.txt in the same directory.
- max-speed: See ethernet.txt in the same directory.
- max-frame-size: See ethernet.txt in the same directory.
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
Example:
eth0: ethernet@522d0000 {
compatible = "socionext,synquacer-netsec";
diff --git a/dts/Bindings/net/wireless/mediatek,mt76.txt b/dts/Bindings/net/wireless/mediatek,mt76.txt
index 7b9a776..7e675da 100644
--- a/dts/Bindings/net/wireless/mediatek,mt76.txt
+++ b/dts/Bindings/net/wireless/mediatek,mt76.txt
@@ -13,11 +13,12 @@ properties:
Optional properties:
-- mac-address: See ethernet.txt in the parent directory
-- local-mac-address: See ethernet.txt in the parent directory
- ieee80211-freq-limit: See ieee80211.txt
- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data
+The MAC address can as well be set with corresponding optional properties
+defined in net/ethernet.txt.
+
Optional nodes:
- led: Properties for a connected LED
Optional properties:
diff --git a/dts/Bindings/net/wireless/qca,ath9k.txt b/dts/Bindings/net/wireless/qca,ath9k.txt
index b7396c8..aaaeeb5 100644
--- a/dts/Bindings/net/wireless/qca,ath9k.txt
+++ b/dts/Bindings/net/wireless/qca,ath9k.txt
@@ -34,9 +34,9 @@ Optional properties:
ath9k wireless chip (in this case the calibration /
EEPROM data will be loaded from userspace using the
kernel firmware loader).
-- mac-address: See ethernet.txt in the parent directory
-- local-mac-address: See ethernet.txt in the parent directory
+The MAC address will be determined using the optional properties defined in
+net/ethernet.txt.
In this example, the node is defined as child node of the PCI controller:
&pci0 {