summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/net
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/net')
-rw-r--r--dts/Bindings/net/amlogic,meson-dwmac.yaml55
-rw-r--r--dts/Bindings/net/brcm,bcm4908-enet.yaml48
-rw-r--r--dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt101
-rw-r--r--dts/Bindings/net/btusb.txt4
-rw-r--r--dts/Bindings/net/can/fsl,flexcan.yaml11
-rw-r--r--dts/Bindings/net/can/rcar_canfd.txt2
-rw-r--r--dts/Bindings/net/dsa/arrow,xrs700x.yaml73
-rw-r--r--dts/Bindings/net/dsa/brcm,sf2.yaml173
-rw-r--r--dts/Bindings/net/dsa/mt7530.txt6
-rw-r--r--dts/Bindings/net/ethernet-controller.yaml6
-rw-r--r--dts/Bindings/net/marvell-pp2.txt6
-rw-r--r--dts/Bindings/net/qca,ar803x.yaml16
-rw-r--r--dts/Bindings/net/qcom,ipa.yaml15
-rw-r--r--dts/Bindings/net/renesas,etheravb.yaml2
-rw-r--r--dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml51
-rw-r--r--dts/Bindings/net/ti,k3-am654-cpts.yaml8
-rw-r--r--dts/Bindings/net/toshiba,visconti-dwmac.yaml85
-rw-r--r--dts/Bindings/net/xilinx_axienet.txt4
18 files changed, 525 insertions, 141 deletions
diff --git a/dts/Bindings/net/amlogic,meson-dwmac.yaml b/dts/Bindings/net/amlogic,meson-dwmac.yaml
index 1f133f4a29..0467441d70 100644
--- a/dts/Bindings/net/amlogic,meson-dwmac.yaml
+++ b/dts/Bindings/net/amlogic,meson-dwmac.yaml
@@ -74,17 +74,60 @@ allOf:
Any configuration is ignored when the phy-mode is set to "rmii".
amlogic,rx-delay-ns:
+ deprecated: true
enum:
- 0
- 2
default: 0
description:
- The internal RGMII RX clock delay (provided by this IP block) in
- nanoseconds. When phy-mode is set to "rgmii" then the RX delay
- should be explicitly configured. When the phy-mode is set to
- either "rgmii-id" or "rgmii-rxid" the RX clock delay is already
- provided by the PHY. Any configuration is ignored when the
- phy-mode is set to "rmii".
+ The internal RGMII RX clock delay in nanoseconds. Deprecated, use
+ rx-internal-delay-ps instead.
+
+ rx-internal-delay-ps:
+ default: 0
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson8b-dwmac
+ - amlogic,meson8m2-dwmac
+ - amlogic,meson-gxbb-dwmac
+ - amlogic,meson-axg-dwmac
+ then:
+ properties:
+ rx-internal-delay-ps:
+ enum:
+ - 0
+ - 2000
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - amlogic,meson-g12a-dwmac
+ then:
+ properties:
+ rx-internal-delay-ps:
+ enum:
+ - 0
+ - 200
+ - 400
+ - 600
+ - 800
+ - 1000
+ - 1200
+ - 1400
+ - 1600
+ - 1800
+ - 2000
+ - 2200
+ - 2400
+ - 2600
+ - 2800
+ - 3000
properties:
compatible:
diff --git a/dts/Bindings/net/brcm,bcm4908-enet.yaml b/dts/Bindings/net/brcm,bcm4908-enet.yaml
new file mode 100644
index 0000000000..79c38ea142
--- /dev/null
+++ b/dts/Bindings/net/brcm,bcm4908-enet.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 Ethernet controller
+
+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm4908-enet
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: RX interrupt
+
+ interrupt-names:
+ const: rx
+
+required:
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ ethernet@80002000 {
+ compatible = "brcm,bcm4908-enet";
+ reg = <0x80002000 0x1000>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx";
+ };
diff --git a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
index 97ca62b0e1..d0935d2afe 100644
--- a/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/dts/Bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -1,108 +1,13 @@
* Broadcom Starfighter 2 integrated swich
-Required properties:
+See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation.
-- compatible: should be one of
- "brcm,bcm7445-switch-v4.0"
- "brcm,bcm7278-switch-v4.0"
- "brcm,bcm7278-switch-v4.8"
-- reg: addresses and length of the register sets for the device, must be 6
- pairs of register addresses and lengths
-- interrupts: interrupts for the devices, must be two interrupts
-- #address-cells: must be 1, see dsa/dsa.txt
-- #size-cells: must be 0, see dsa/dsa.txt
-
-Deprecated binding required properties:
+*Deprecated* binding required properties:
- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
- #address-cells: must be 2, see dsa/dsa.txt
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt.
-
-Optional properties:
-
-- reg-names: litteral names for the device base register addresses, when present
- must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb"
-
-- interrupt-names: litternal names for the device interrupt lines, when present
- must be: "switch_0" and "switch_1"
-
-- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the
- switch
-
-- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported
- by the switch
-
-- brcm,fcb-pause-override: boolean property, if present indicates that the switch
- supports Failover Control Block pause override capability
-
-- brcm,acb-packets-inflight: boolean property, if present indicates that the switch
- Admission Control Block supports reporting the number of packets in-flight in a
- switch queue
-
-- resets: a single phandle and reset identifier pair. See
- Documentation/devicetree/bindings/reset/reset.txt for details.
-
-- reset-names: If the "reset" property is specified, this property should have
- the value "switch" to denote the switch reset line.
-
-- clocks: when provided, the first phandle is to the switch's main clock and
- is valid for both BCM7445 and BCM7278. The second phandle is only applicable
- to BCM7445 and is to support dividing the switch core clock.
-
-- clock-names: when provided, the first phandle must be "sw_switch", and the
- second must be named "sw_switch_mdiv".
-
-Port subnodes:
-
-Optional properties:
-
-- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch
- port has Broadcom tags enabled (per-packet metadata)
-
-Example:
-
-switch_top@f0b00000 {
- compatible = "simple-bus";
- #size-cells = <1>;
- #address-cells = <1>;
- ranges = <0 0xf0b00000 0x40804>;
-
- ethernet_switch@0 {
- compatible = "brcm,bcm7445-switch-v4.0";
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x0 0x40000
- 0x40000 0x110
- 0x40340 0x30
- 0x40380 0x30
- 0x40400 0x34
- 0x40600 0x208>;
- reg-names = "core", "reg", intrl2_0", "intrl2_1",
- "fcb, "acb";
- interrupts = <0 0x18 0
- 0 0x19 0>;
- brcm,num-gphy = <1>;
- brcm,num-rgmii-ports = <2>;
- brcm,fcb-pause-override;
- brcm,acb-packets-inflight;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- label = "gphy";
- reg = <0>;
- };
- };
- };
-};
-
Example using the old DSA DeviceTree binding:
switch_top@f0b00000 {
@@ -132,7 +37,7 @@ switch_top@f0b00000 {
switch@0 {
reg = <0 0>;
#size-cells = <0>;
- #address-cells <1>;
+ #address-cells = <1>;
port@0 {
label = "gphy";
diff --git a/dts/Bindings/net/btusb.txt b/dts/Bindings/net/btusb.txt
index b1ad6ee68e..f546b1f7dd 100644
--- a/dts/Bindings/net/btusb.txt
+++ b/dts/Bindings/net/btusb.txt
@@ -4,7 +4,7 @@ Generic Bluetooth controller over USB (btusb driver)
Required properties:
- compatible : should comply with the format "usbVID,PID" specified in
- Documentation/devicetree/bindings/usb/usb-device.txt
+ Documentation/devicetree/bindings/usb/usb-device.yaml
At the time of writing, the only OF supported devices
(more may be added later) are:
@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
compatible = "usb1286,204e";
reg = <1>;
interrupt-parent = <&gpio0>;
- interrupt-name = "wakeup";
+ interrupt-names = "wakeup";
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/dts/Bindings/net/can/fsl,flexcan.yaml b/dts/Bindings/net/can/fsl,flexcan.yaml
index 0d2df30f19..fe6a949a2e 100644
--- a/dts/Bindings/net/can/fsl,flexcan.yaml
+++ b/dts/Bindings/net/can/fsl,flexcan.yaml
@@ -110,6 +110,16 @@ properties:
description:
Enable CAN remote wakeup.
+ fsl,scu-index:
+ description: |
+ The scu index of CAN instance.
+ For SoCs with SCU support, need setup stop mode via SCU firmware, so this
+ property can help indicate a resource. It supports up to 3 CAN instances
+ now.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 0
+ maximum: 2
+
required:
- compatible
- reg
@@ -137,4 +147,5 @@ examples:
clocks = <&clks 1>, <&clks 2>;
clock-names = "ipg", "per";
fsl,stop-mode = <&gpr 0x34 28>;
+ fsl,scu-index = /bits/ 8 <1>;
};
diff --git a/dts/Bindings/net/can/rcar_canfd.txt b/dts/Bindings/net/can/rcar_canfd.txt
index 22cf2a889b..248c4ed97a 100644
--- a/dts/Bindings/net/can/rcar_canfd.txt
+++ b/dts/Bindings/net/can/rcar_canfd.txt
@@ -97,7 +97,7 @@ E.g. below enables Channel 0 alone in the board using External clock
as fCAN clock.
&canfd {
- pinctrl-0 = <&canfd0_pins &can_clk_pins>;
+ pinctrl-0 = <&canfd0_pins>, <&can_clk_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/dts/Bindings/net/dsa/arrow,xrs700x.yaml b/dts/Bindings/net/dsa/arrow,xrs700x.yaml
new file mode 100644
index 0000000000..3f01b65f3b
--- /dev/null
+++ b/dts/Bindings/net/dsa/arrow,xrs700x.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arrow SpeedChips XRS7000 Series Switch Device Tree Bindings
+
+allOf:
+ - $ref: dsa.yaml#
+
+maintainers:
+ - George McCollister <george.mccollister@gmail.com>
+
+description:
+ The Arrow SpeedChips XRS7000 Series of single chip gigabit Ethernet switches
+ are designed for critical networking applications. They have up to three
+ RGMII ports and one RMII port and are managed via i2c or mdio.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - arrow,xrs7003e
+ - arrow,xrs7003f
+ - arrow,xrs7004e
+ - arrow,xrs7004f
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch@8 {
+ compatible = "arrow,xrs7004e";
+ reg = <0x8>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan0";
+ phy-handle = <&swphy0>;
+ phy-mode = "rgmii-id";
+ };
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&swphy1>;
+ phy-mode = "rgmii-id";
+ };
+ ethernet-port@3 {
+ reg = <3>;
+ label = "cpu";
+ ethernet = <&fec1>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
diff --git a/dts/Bindings/net/dsa/brcm,sf2.yaml b/dts/Bindings/net/dsa/brcm,sf2.yaml
new file mode 100644
index 0000000000..d730fe5a43
--- /dev/null
+++ b/dts/Bindings/net/dsa/brcm,sf2.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Starfighter 2 integrated swich
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm4908-switch
+ - brcm,bcm7278-switch-v4.0
+ - brcm,bcm7278-switch-v4.8
+ - brcm,bcm7445-switch-v4.0
+
+ reg:
+ minItems: 6
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: core
+ - const: reg
+ - const: intrl2_0
+ - const: intrl2_1
+ - const: fcb
+ - const: acb
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: switch_0
+ - const: switch_1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: switch
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: switch's main clock
+ - description: dividing of the switch core clock
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: sw_switch
+ - const: sw_switch_mdiv
+
+ brcm,num-gphy:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum number of integrated gigabit PHYs in the switch
+
+ brcm,num-rgmii-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum number of RGMII interfaces supported by the switch
+
+ brcm,fcb-pause-override:
+ description: if present indicates that the switch supports Failover Control
+ Block pause override capability
+ type: boolean
+
+ brcm,acb-packets-inflight:
+ description: if present indicates that the switch Admission Control Block
+ supports reporting the number of packets in-flight in a switch queue
+ type: boolean
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ ports:
+ type: object
+
+ properties:
+ brcm,use-bcm-hdr:
+ description: if present, indicates that the switch port has Broadcom
+ tags enabled (per-packet metadata)
+ type: boolean
+
+required:
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+allOf:
+ - $ref: "dsa.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm7278-switch-v4.0
+ - brcm,bcm7278-switch-v4.8
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 1
+ clock-names:
+ minItems: 1
+ maxItems: 1
+ required:
+ - clocks
+ - clock-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7445-switch-v4.0
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ minItems: 2
+ maxItems: 2
+ required:
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ switch@f0b00000 {
+ compatible = "brcm,bcm7445-switch-v4.0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf0b00000 0x40000>,
+ <0xf0b40000 0x110>,
+ <0xf0b40340 0x30>,
+ <0xf0b40380 0x30>,
+ <0xf0b40400 0x34>,
+ <0xf0b40600 0x208>;
+ reg-names = "core", "reg", "intrl2_0", "intrl2_1",
+ "fcb", "acb";
+ interrupts = <0 0x18 0>,
+ <0 0x19 0>;
+ clocks = <&sw_switch>, <&sw_switch_mdiv>;
+ clock-names = "sw_switch", "sw_switch_mdiv";
+ brcm,num-gphy = <1>;
+ brcm,num-rgmii-ports = <2>;
+ brcm,fcb-pause-override;
+ brcm,acb-packets-inflight;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ label = "gphy";
+ reg = <0>;
+ };
+ };
+ };
diff --git a/dts/Bindings/net/dsa/mt7530.txt b/dts/Bindings/net/dsa/mt7530.txt
index 560369efad..de04626a8e 100644
--- a/dts/Bindings/net/dsa/mt7530.txt
+++ b/dts/Bindings/net/dsa/mt7530.txt
@@ -76,6 +76,12 @@ phy-mode must be set, see also example 2 below!
* mt7621: phy-mode = "rgmii-txid";
* mt7623: phy-mode = "rgmii";
+Optional properties:
+
+- gpio-controller: Boolean; if defined, MT7530's LED controller will run on
+ GPIO mode.
+- #gpio-cells: Must be 2 if gpio-controller is defined.
+
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required, optional properties and how the integrated switch subnodes must
be specified.
diff --git a/dts/Bindings/net/ethernet-controller.yaml b/dts/Bindings/net/ethernet-controller.yaml
index dac4aadb6e..4b7d1e5d00 100644
--- a/dts/Bindings/net/ethernet-controller.yaml
+++ b/dts/Bindings/net/ethernet-controller.yaml
@@ -89,6 +89,7 @@ properties:
- trgmii
- 1000base-x
- 2500base-x
+ - 5gbase-r
- rxaui
- xaui
@@ -205,6 +206,11 @@ properties:
Indicates that full-duplex is used. When absent, half
duplex is assumed.
+ pause:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that pause should be enabled.
+
asym-pause:
$ref: /schemas/types.yaml#/definitions/flag
description:
diff --git a/dts/Bindings/net/marvell-pp2.txt b/dts/Bindings/net/marvell-pp2.txt
index b783976693..ce15c173f4 100644
--- a/dts/Bindings/net/marvell-pp2.txt
+++ b/dts/Bindings/net/marvell-pp2.txt
@@ -1,5 +1,6 @@
* Marvell Armada 375 Ethernet Controller (PPv2.1)
Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+ Marvell CN913X Ethernet Controller (PPv2.3)
Required properties:
@@ -12,10 +13,11 @@ Required properties:
- common controller registers
- LMS registers
- one register area per Ethernet port
- For "marvell,armada-7k-pp2", must contain the following register
+ For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
sets:
- packet processor registers
- networking interfaces registers
+ - CM3 address space used for TX Flow Control
- clocks: pointers to the reference clocks for this device, consequently:
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
@@ -81,7 +83,7 @@ Example for marvell,armada-7k-pp2:
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
- reg = <0x0 0x100000>, <0x129000 0xb000>;
+ reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
<&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
diff --git a/dts/Bindings/net/qca,ar803x.yaml b/dts/Bindings/net/qca,ar803x.yaml
index 64b3357ade..b3d4013b7c 100644
--- a/dts/Bindings/net/qca,ar803x.yaml
+++ b/dts/Bindings/net/qca,ar803x.yaml
@@ -28,6 +28,10 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
+ qca,disable-smarteee:
+ description: Disable Atheros SmartEEE feature.
+ type: boolean
+
qca,keep-pll-enabled:
description: |
If set, keep the PLL enabled even if there is no link. Useful if you
@@ -36,6 +40,18 @@ properties:
Only supported on the AR8031.
type: boolean
+ qca,smarteee-tw-us-100m:
+ description: EEE Tw parameter for 100M links.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 255
+
+ qca,smarteee-tw-us-1g:
+ description: EEE Tw parameter for gigabit links.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 255
+
vddio-supply:
description: |
RGMII I/O voltage regulator (see regulator/regulator.yaml).
diff --git a/dts/Bindings/net/qcom,ipa.yaml b/dts/Bindings/net/qcom,ipa.yaml
index 8a2d126446..8f86084bf1 100644
--- a/dts/Bindings/net/qcom,ipa.yaml
+++ b/dts/Bindings/net/qcom,ipa.yaml
@@ -113,13 +113,6 @@ properties:
performing early IPA initialization, including loading and
validating firwmare used by the GSI.
- modem-remoteproc:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- This defines the phandle to the remoteproc node representing
- the modem subsystem. This is requied so the IPA driver can
- receive and act on notifications of modem up/down events.
-
memory-region:
maxItems: 1
description:
@@ -135,7 +128,6 @@ required:
- interrupts
- interconnects
- qcom,smem-states
- - modem-remoteproc
oneOf:
- required:
@@ -147,7 +139,7 @@ additionalProperties: false
examples:
- |
- #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interconnect/qcom,sdm845.h>
@@ -168,7 +160,6 @@ examples:
compatible = "qcom,sdm845-ipa";
modem-init;
- modem-remoteproc = <&mss_pil>;
iommus = <&apps_smmu 0x720 0x3>;
reg = <0x1e40000 0x7000>,
@@ -178,8 +169,8 @@ examples:
"ipa-shared",
"gsi";
- interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
- <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
diff --git a/dts/Bindings/net/renesas,etheravb.yaml b/dts/Bindings/net/renesas,etheravb.yaml
index de9dd574a2..91ba96d43c 100644
--- a/dts/Bindings/net/renesas,etheravb.yaml
+++ b/dts/Bindings/net/renesas,etheravb.yaml
@@ -40,6 +40,7 @@ properties:
- renesas,etheravb-r8a77980 # R-Car V3H
- renesas,etheravb-r8a77990 # R-Car E3
- renesas,etheravb-r8a77995 # R-Car D3
+ - renesas,etheravb-r8a779a0 # R-Car V3U
- const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
reg: true
@@ -170,6 +171,7 @@ allOf:
- renesas,etheravb-r8a77965
- renesas,etheravb-r8a77970
- renesas,etheravb-r8a77980
+ - renesas,etheravb-r8a779a0
then:
required:
- tx-internal-delay-ps
diff --git a/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml b/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
index c47b58f3e3..783b9e32cf 100644
--- a/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/dts/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
+title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
maintainers:
- Grygorii Strashko <grygorii.strashko@ti.com>
@@ -13,19 +13,16 @@ maintainers:
description:
The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
(one external) and provides Ethernet packet communication for the device.
- CPSW2G NUSS features - the Reduced Gigabit Media Independent Interface (RGMII),
- Reduced Media Independent Interface (RMII), the Management Data
- Input/Output (MDIO) interface for physical layer device (PHY) management,
- new version of Common Platform Time Sync (CPTS), updated Address Lookup
- Engine (ALE).
- One external Ethernet port (port 1) with selectable RGMII/RMII interfaces and
- an internal Communications Port Programming Interface (CPPI5) (Host port 0).
+ The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports
+ (two external) and provides Ethernet packet communication and switching.
+
+ The internal Communications Port Programming Interface (CPPI5) (Host port 0).
Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels
- and one RX channels and operating by TI AM654x/J721E NAVSS Unified DMA
- Peripheral Root Complex (UDMA-P) controller.
- The CPSW2G NUSS is integrated into device MCU domain named MCU_CPSW0.
+ and one RX channels and operating by NAVSS Unified DMA Peripheral Root
+ Complex (UDMA-P) controller.
- Additional features
+ CPSWxG features
+ updated Address Lookup Engine (ALE).
priority level Quality Of Service (QOS) support (802.1p)
Support for Audio/Video Bridging (P802.1Qav/D6.0)
Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F)
@@ -38,10 +35,18 @@ description:
VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
RX/TX csum offload
+ Management Data Input/Output (MDIO) interface for PHYs management
+ RMII/RGMII Interfaces support
+ new version of Common Platform Time Sync (CPTS)
+
+ The CPSWxG NUSS is integrated into
+ device MCU domain named MCU_CPSW0 on AM654x/J721E SoC.
+ device MAIN domain named CPSW0 on AM642x SoC.
Specifications can be found at
- http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
- http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf
+ https://www.ti.com/lit/pdf/spruid7
+ https://www.ti.com/lit/zip/spruil1
+ https://www.ti.com/lit/pdf/spruim2
properties:
"#address-cells": true
@@ -51,11 +56,12 @@ properties:
oneOf:
- const: ti,am654-cpsw-nuss
- const: ti,j721e-cpsw-nuss
+ - const: ti,am642-cpsw-nuss
reg:
maxItems: 1
description:
- The physical base address and size of full the CPSW2G NUSS IO range
+ The physical base address and size of full the CPSWxG NUSS IO range
reg-names:
items:
@@ -66,12 +72,17 @@ properties:
dma-coherent: true
clocks:
- description: CPSW2G NUSS functional clock
+ maxItems: 1
+ description: CPSWxG NUSS functional clock
clock-names:
items:
- const: fck
+ assigned-clock-parents: true
+
+ assigned-clocks: true
+
power-domains:
maxItems: 1
@@ -99,16 +110,16 @@ properties:
const: 0
patternProperties:
- port@1:
+ port@[1-2]:
type: object
- description: CPSW2G NUSS external ports
+ description: CPSWxG NUSS external ports
$ref: ethernet-controller.yaml#
properties:
reg:
- items:
- - const: 1
+ minimum: 1
+ maximum: 2
description: CPSW port number
phys:
diff --git a/dts/Bindings/net/ti,k3-am654-cpts.yaml b/dts/Bindings/net/ti,k3-am654-cpts.yaml
index 9b7117920d..4317eba503 100644
--- a/dts/Bindings/net/ti,k3-am654-cpts.yaml
+++ b/dts/Bindings/net/ti,k3-am654-cpts.yaml
@@ -59,6 +59,7 @@ properties:
- const: cpts
clocks:
+ maxItems: 1
description: CPTS reference clock
clock-names:
@@ -73,6 +74,13 @@ properties:
items:
- const: cpts
+ assigned-clock-parents: true
+
+ assigned-clocks: true
+
+ power-domains:
+ maxItems: 1
+
ti,cpts-ext-ts-inputs:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
diff --git a/dts/Bindings/net/toshiba,visconti-dwmac.yaml b/dts/Bindings/net/toshiba,visconti-dwmac.yaml
new file mode 100644
index 0000000000..59724d18e6
--- /dev/null
+++ b/dts/Bindings/net/toshiba,visconti-dwmac.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Toshiba Visconti DWMAC Ethernet controller
+
+maintainers:
+ - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - toshiba,visconti-dwmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - toshiba,visconti-dwmac
+ - const: snps,dwmac-4.20a
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: main clock
+ - description: PHY reference clock
+
+ clock-names:
+ items:
+ - const: stmmaceth
+ - const: phy_ref_clk
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ piether: ethernet@28000000 {
+ compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a";
+ reg = <0 0x28000000 0 0x10000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk300mhz>, <&clk125mhz>;
+ clock-names = "stmmaceth", "phy_ref_clk";
+ snps,txpbl = <4>;
+ snps,rxpbl = <4>;
+ snps,tso;
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <0x1>;
+ };
+ };
+ };
+ };
diff --git a/dts/Bindings/net/xilinx_axienet.txt b/dts/Bindings/net/xilinx_axienet.txt
index 7360617cde..2cd452419e 100644
--- a/dts/Bindings/net/xilinx_axienet.txt
+++ b/dts/Bindings/net/xilinx_axienet.txt
@@ -38,6 +38,10 @@ Optional properties:
1 to enable partial TX checksum offload,
2 to enable full TX checksum offload
- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload
+- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to
+ support both 1000BaseX and SGMII modes. If set, the phy-mode
+ should be set to match the mode selected on core reset (i.e.
+ by the basex_or_sgmii core input line).
- clocks : AXI bus clock for the device. Refer to common clock bindings.
Used to calculate MDIO clock divisor. If not specified, it is
auto-detected from the CPU clock (but only on platforms where
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 08:38:12 +0000