diff options
Diffstat (limited to 'dts/Bindings/pci/brcm,iproc-pcie.txt')
| -rw-r--r-- | dts/Bindings/pci/brcm,iproc-pcie.txt | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt index f7ce50e38e..45c2a8094a 100644 --- a/dts/Bindings/pci/brcm,iproc-pcie.txt +++ b/dts/Bindings/pci/brcm,iproc-pcie.txt @@ -17,6 +17,21 @@ Optional properties: - phys: phandle of the PCIe PHY device - phy-names: must be "pcie-phy" +- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done +by the ASIC after power on reset. In this case, SW needs to configure it + +If the brcm,pcie-ob property is present, the following properties become +effective: + +Required: +- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal +address used by the iProc PCIe core (not the PCIe address) +- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) + +Optional: +- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to +increase the outbound window size + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; @@ -38,6 +53,11 @@ Example: phys = <&phy 0 5>; phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; }; pcie1: pcie@18013000 { |