diff options
Diffstat (limited to 'dts/Bindings/pci/brcm,stb-pcie.yaml')
-rw-r--r-- | dts/Bindings/pci/brcm,stb-pcie.yaml | 51 |
1 files changed, 48 insertions, 3 deletions
diff --git a/dts/Bindings/pci/brcm,stb-pcie.yaml b/dts/Bindings/pci/brcm,stb-pcie.yaml index b9589a0daa..22491f7f88 100644 --- a/dts/Bindings/pci/brcm,stb-pcie.yaml +++ b/dts/Bindings/pci/brcm,stb-pcie.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Brcmstb PCIe Host Controller Device Tree Bindings +title: Brcmstb PCIe Host Controller maintainers: - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> @@ -19,6 +19,8 @@ properties: - brcm,bcm7278-pcie # Broadcom 7278 Arm - brcm,bcm7216-pcie # Broadcom 7216 Arm - brcm,bcm7445-pcie # Broadcom 7445 Arm + - brcm,bcm7425-pcie # Broadcom 7425 MIPs + - brcm,bcm7435-pcie # Broadcom 7435 MIPs reg: maxItems: 1 @@ -62,6 +64,24 @@ properties: aspm-no-l0s: true + brcm,clkreq-mode: + description: A string that determines the operating + clkreq mode of the PCIe RC HW with respect to controlling the refclk + signal. There are three different modes -- "safe", which drives the + refclk signal unconditionally and will work for all devices but does + not provide any power savings; "no-l1ss" -- which provides Clock + Power Management, L0s, and L1, but cannot provide L1 substate (L1SS) + power savings. If the downstream device connected to the RC is L1SS + capable AND the OS enables L1SS, all PCIe traffic may abruptly halt, + potentially hanging the system; "default" -- which provides L0s, L1, + and L1SS, but not compliant to provide Clock Power Management; + specifically, may not be able to meet the T_CLRon max timing of 400ns + as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI + Express Mini CEM 2.1 specification. This situation is atypical and + should happen only with older devices. + $ref: /schemas/types.yaml#/definitions/string + enum: [ safe, no-l1ss, default ] + brcm,scb-sizes: description: u64 giving the 64bit PCIe memory viewport size of a memory controller. There may be up to @@ -76,6 +96,7 @@ properties: maxItems: 3 required: + - compatible - reg - ranges - dma-ranges @@ -88,6 +109,7 @@ required: allOf: - $ref: /schemas/pci/pci-bus.yaml# + - $ref: /schemas/interrupt-controller/msi-controller.yaml# - if: properties: compatible: @@ -142,11 +164,15 @@ examples: #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pcie", "msi"; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; msi-controller; ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; @@ -154,5 +180,24 @@ examples: <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; brcm,enable-ssc; brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; + + /* PCIe bridge, Root Port */ + pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + vpcie3v3-supply = <&vreg7>; + ranges; + + /* PCIe endpoint */ + pci-ep@0,0 { + assigned-addresses = + <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci14e4,1688"; + }; + }; }; }; |