diff options
Diffstat (limited to 'dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml')
| -rw-r--r-- | dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml b/dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml new file mode 100644 index 0000000000..a24fb8307d --- /dev/null +++ b/dts/Bindings/pci/nvidia,tegra194-pcie-ep.yaml @@ -0,0 +1,319 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Vidya Sagar <vidyas@nvidia.com> + +description: | + This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus + inherits all the common properties defined in snps,dw-pcie-ep.yaml. Some + of the controller instances are dual mode; they can work either in Root + Port mode or Endpoint mode but one at a time. + + On Tegra194, controllers C0, C4 and C5 support Endpoint mode. + On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode. + + Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to + operate in the Endpoint mode because of the way the platform is designed. + +properties: + compatible: + enum: + - nvidia,tegra194-pcie-ep + - nvidia,tegra234-pcie-ep + + reg: + items: + - description: controller's application logic registers + - description: iATU and DMA registers. This is where the iATU (internal + Address Translation Unit) registers of the PCIe core are made + available for software access. + - description: aperture where the Root Port's own configuration + registers are available. + - description: aperture used to map the remote Root Complex address space + + reg-names: + items: + - const: appl + - const: atu_dma + - const: dbi + - const: addr_space + + interrupts: + items: + - description: controller interrupt + + interrupt-names: + items: + - const: intr + + clocks: + items: + - description: module clock + + clock-names: + items: + - const: core + + resets: + items: + - description: APB bus interface reset + - description: module reset + + reset-names: + items: + - const: apb + - const: core + + reset-gpios: + description: Must contain a phandle to a GPIO controller followed by GPIO + that is being used as PERST input signal. Please refer to pci.txt. + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + items: + - const: p2u-0 + - const: p2u-1 + - const: p2u-2 + - const: p2u-3 + - const: p2u-4 + - const: p2u-5 + - const: p2u-6 + - const: p2u-7 + + power-domains: + maxItems: 1 + description: | + A phandle to the node that controls power to the respective PCIe + controller and a specifier name for the PCIe controller. + + Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" + Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h" + + interconnects: + items: + - description: memory read client + - description: memory write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + dma-coherent: true + + nvidia,bpmp: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + Must contain a pair of phandles to BPMP controller node followed by + controller ID. Following are the controller IDs for each controller: + + Tegra194 + + 0: C0 + 1: C1 + 2: C2 + 3: C3 + 4: C4 + 5: C5 + + Tegra234 + + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 + + items: + - items: + - description: phandle to BPMP controller node + - description: PCIe controller ID + maximum: 10 + + nvidia,aspm-cmrt-us: + description: Common Mode Restore Time for proper operation of ASPM to be + specified in microseconds + + nvidia,aspm-pwr-on-t-us: + description: Power On time for proper operation of ASPM to be specified in + microseconds + + nvidia,aspm-l0s-entrance-latency-us: + description: ASPM L0s entrance latency to be specified in microseconds + + vddio-pex-ctl-supply: + description: A phandle to the regulator supply for PCIe side band signals + + nvidia,refclk-select-gpios: + maxItems: 1 + description: GPIO used to enable REFCLK to controller from the host + + nvidia,enable-ext-refclk: + description: | + This boolean property needs to be present if the controller is configured + to receive Reference Clock from the host. + NOTE: This is applicable only for Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,enable-srns: + description: | + This boolean property needs to be present if the controller is + configured to operate in SRNS (Separate Reference Clocks with No + Spread-Spectrum Clocking). NOTE: This is applicable only for + Tegra234. + + $ref: /schemas/types.yaml#/definitions/flag + +allOf: + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml# + +unevaluatedProperties: false + +required: + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - reset-gpios + - vddio-pex-ctl-supply + - num-lanes + - phys + - phy-names + - nvidia,bpmp + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra194-powergate.h> + #include <dt-bindings/reset/tegra194-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra194-pcie-ep"; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + pinctrl-names = "default"; + pinctrl-0 = <&clkreq_c5_bi_dir_state>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; + + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/gpio/tegra234-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + bus@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x8 0x0>; + + pcie-ep@141a0000 { + compatible = "nvidia,tegra234-pcie-ep"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */ + reg-names = "appl", "atu_dma", "dbi", "addr_space"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupt-names = "intr"; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,enable-ext-refclk; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>; + + reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon + TEGRA234_AON_GPIO(AA, 4) + GPIO_ACTIVE_HIGH>; + + num-lanes = <8>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + }; |