summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pci
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/pci')
-rw-r--r--dts/Bindings/pci/altera-pcie-msi.txt1
-rw-r--r--dts/Bindings/pci/altera-pcie.txt1
-rw-r--r--dts/Bindings/pci/brcm,iproc-pcie.txt1
-rw-r--r--dts/Bindings/pci/cdns,cdns-pcie-ep.txt5
-rw-r--r--dts/Bindings/pci/cdns,cdns-pcie-host.txt6
-rw-r--r--dts/Bindings/pci/faraday,ftpci100.txt1
-rw-r--r--dts/Bindings/pci/mobiveil-pcie.txt3
-rw-r--r--dts/Bindings/pci/pci-keystone.txt3
-rw-r--r--dts/Bindings/pci/ralink,rt3883-pci.txt3
9 files changed, 11 insertions, 13 deletions
diff --git a/dts/Bindings/pci/altera-pcie-msi.txt b/dts/Bindings/pci/altera-pcie-msi.txt
index 09cd3bc..9514c32 100644
--- a/dts/Bindings/pci/altera-pcie-msi.txt
+++ b/dts/Bindings/pci/altera-pcie-msi.txt
@@ -7,7 +7,6 @@ Required properties:
- reg-names: must include the following entries:
"csr": CSR registers
"vector_slave": vectors slave port region
-- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
diff --git a/dts/Bindings/pci/altera-pcie.txt b/dts/Bindings/pci/altera-pcie.txt
index a1dc936..6c396f1 100644
--- a/dts/Bindings/pci/altera-pcie.txt
+++ b/dts/Bindings/pci/altera-pcie.txt
@@ -6,7 +6,6 @@ Required properties:
- reg-names: must include the following entries:
"Txs": TX slave port region
"Cra": Control register access region
-- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt
index b8e48b4..df065aa 100644
--- a/dts/Bindings/pci/brcm,iproc-pcie.txt
+++ b/dts/Bindings/pci/brcm,iproc-pcie.txt
@@ -65,7 +65,6 @@ When the iProc event queue based MSI is used, one needs to define the
following properties in the MSI device node:
- compatible: Must be "brcm,iproc-msi"
- msi-controller: claims itself as an MSI controller
-- interrupt-parent: Link to its parent interrupt device
- interrupts: List of interrupt IDs from its parent interrupt device
Optional properties:
diff --git a/dts/Bindings/pci/cdns,cdns-pcie-ep.txt b/dts/Bindings/pci/cdns,cdns-pcie-ep.txt
index 9a30523..4a0475e 100644
--- a/dts/Bindings/pci/cdns,cdns-pcie-ep.txt
+++ b/dts/Bindings/pci/cdns,cdns-pcie-ep.txt
@@ -9,6 +9,9 @@ Required properties:
Optional properties:
- max-functions: Maximum number of functions that can be configured (default 1).
+- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
+ than one in the list. If only one PHY listed it must manage all lanes.
+- phy-names: List of names to identify the PHY.
Example:
@@ -19,4 +22,6 @@ pcie@fc000000 {
reg-names = "reg", "mem";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <8>;
+ phys = <&ep_phy0 &ep_phy1>;
+ phy-names = "pcie-lane0","pcie-lane1";
};
diff --git a/dts/Bindings/pci/cdns,cdns-pcie-host.txt b/dts/Bindings/pci/cdns,cdns-pcie-host.txt
index 20a33f3..91de69c 100644
--- a/dts/Bindings/pci/cdns,cdns-pcie-host.txt
+++ b/dts/Bindings/pci/cdns,cdns-pcie-host.txt
@@ -24,6 +24,9 @@ Optional properties:
translations (default 32)
- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
- device-id: The PCI device ID (16 bits, default is design dependent)
+- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
+ than one in the list. If only one PHY listed it must manage all lanes.
+- phy-names: List of names to identify the PHY.
Example:
@@ -57,4 +60,7 @@ pcie@fb000000 {
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
msi-parent = <&its_pci>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
};
diff --git a/dts/Bindings/pci/faraday,ftpci100.txt b/dts/Bindings/pci/faraday,ftpci100.txt
index 89a84f8..5f8cb49 100644
--- a/dts/Bindings/pci/faraday,ftpci100.txt
+++ b/dts/Bindings/pci/faraday,ftpci100.txt
@@ -41,7 +41,6 @@ Mandatory subnodes:
- For "faraday,ftpci100" a node representing the interrupt-controller inside the
host bridge is mandatory. It has the following mandatory properties:
- interrupt: see interrupt-controller/interrupts.txt
- - interrupt-parent: see interrupt-controller/interrupts.txt
- interrupt-controller: see interrupt-controller/interrupts.txt
- #address-cells: set to <0>
- #interrupt-cells: set to <1>
diff --git a/dts/Bindings/pci/mobiveil-pcie.txt b/dts/Bindings/pci/mobiveil-pcie.txt
index 65038aa..a618d47 100644
--- a/dts/Bindings/pci/mobiveil-pcie.txt
+++ b/dts/Bindings/pci/mobiveil-pcie.txt
@@ -26,9 +26,6 @@ Required properties:
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
-- interrupt-parent : phandle to the interrupt controller that
- it is attached to, it should be set to gic to point to
- ARM's Generic Interrupt Controller node in system DT.
- interrupts: The interrupt line of the PCIe controller
last cell of this field is set to 4 to
denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
diff --git a/dts/Bindings/pci/pci-keystone.txt b/dts/Bindings/pci/pci-keystone.txt
index 3d4a209..4dd17de 100644
--- a/dts/Bindings/pci/pci-keystone.txt
+++ b/dts/Bindings/pci/pci-keystone.txt
@@ -17,7 +17,6 @@ reg: index 1 is the base address and length of DW application registers.
pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1
- interrupt-parent: Parent interrupt controller phandle
interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
Example:
@@ -37,8 +36,6 @@ pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
pcie_intc: Interrupt controller device node for Legacy IRQ chip
interrupt-cells: should be set to 1
- interrupt-parent: Parent interrupt controller phandle
- interrupts: GIC interrupt lines connected to PCI Legacy interrupt lines
Example:
pcie_intc: legacy-interrupt-controller {
diff --git a/dts/Bindings/pci/ralink,rt3883-pci.txt b/dts/Bindings/pci/ralink,rt3883-pci.txt
index a04ab1b..ffba4f6 100644
--- a/dts/Bindings/pci/ralink,rt3883-pci.txt
+++ b/dts/Bindings/pci/ralink,rt3883-pci.txt
@@ -41,9 +41,6 @@
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- - interrupt-parent: the phandle for the interrupt controller that
- services interrupts for this device.
-
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.