diff options
Diffstat (limited to 'dts/Bindings/phy/qcom,qusb2-phy.yaml')
-rw-r--r-- | dts/Bindings/phy/qcom,qusb2-phy.yaml | 179 |
1 files changed, 100 insertions, 79 deletions
diff --git a/dts/Bindings/phy/qcom,qusb2-phy.yaml b/dts/Bindings/phy/qcom,qusb2-phy.yaml index ec9ccaaba0..95eecbaef0 100644 --- a/dts/Bindings/phy/qcom,qusb2-phy.yaml +++ b/dts/Bindings/phy/qcom,qusb2-phy.yaml @@ -2,13 +2,13 @@ %YAML 1.2 --- -$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm QUSB2 phy controller maintainers: - - Manu Gautam <mgautam@codeaurora.org> + - Wesley Cheng <quic_wcheng@quicinc.com> description: QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. @@ -18,17 +18,22 @@ properties: oneOf: - items: - enum: + - qcom,ipq6018-qusb2-phy - qcom,ipq8074-qusb2-phy + - qcom,ipq9574-qusb2-phy + - qcom,msm8953-qusb2-phy - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy + - qcom,qcm2290-qusb2-phy - qcom,sdm660-qusb2-phy - - qcom,ipq6018-qusb2-phy - qcom,sm4250-qusb2-phy - qcom,sm6115-qusb2-phy - items: - enum: - qcom,sc7180-qusb2-phy + - qcom,sdm670-qusb2-phy - qcom,sdm845-qusb2-phy + - qcom,sm6350-qusb2-phy - const: qcom,qusb2-v2-phy reg: maxItems: 1 @@ -50,6 +55,10 @@ properties: - const: ref - const: iface + vdd-supply: + description: + Phandle to 0.9V regulator supply to PHY digital circuit. + vdda-pll-supply: description: Phandle to 1.8V regulator supply to PHY refclk pll block. @@ -74,81 +83,74 @@ properties: Phandle to TCSR syscon register region. $ref: /schemas/types.yaml#/definitions/phandle -if: - properties: - compatible: - contains: - const: qcom,qusb2-v2-phy -then: - properties: - qcom,imp-res-offset-value: - description: - It is a 6 bit value that specifies offset to be - added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 63 - default: 0 - - qcom,bias-ctrl-value: - description: - It is a 6 bit value that specifies bias-ctrl-value. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 63 - default: 32 - - qcom,charge-ctrl-value: - description: - It is a 2 bit value that specifies charge-ctrl-value. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 0 - - qcom,hstx-trim-value: - description: - It is a 4 bit value that specifies tuning for HSTX - output current. - Possible range is - 15mA to 24mA (stepsize of 600 uA). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 15 - default: 3 - - qcom,preemphasis-level: - description: - It is a 2 bit value that specifies pre-emphasis level. - Possible range is 0 to 15% (stepsize of 5%). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 2 - - qcom,preemphasis-width: - description: - It is a 1 bit value that specifies how long the HSTX - pre-emphasis (specified using qcom,preemphasis-level) must be in - effect. Duration could be half-bit of full-bit. - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 1 - default: 0 - - qcom,hsdisc-trim-value: - description: - It is a 2 bit value tuning parameter that control disconnect - threshold and may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 0 + qcom,imp-res-offset-value: + description: + It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 + + qcom,bias-ctrl-value: + description: + It is a 6 bit value that specifies bias-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 + + qcom,charge-ctrl-value: + description: + It is a 2 bit value that specifies charge-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + qcom,hstx-trim-value: + description: + It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 + + qcom,preemphasis-level: + description: + It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 + + qcom,preemphasis-width: + description: + It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 + + qcom,hsdisc-trim-value: + description: + It is a 2 bit value tuning parameter that control disconnect + threshold and may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 required: - compatible @@ -156,10 +158,28 @@ required: - "#phy-cells" - clocks - clock-names + - vdd-supply - vdda-pll-supply - vdda-phy-dpdm-supply - resets +allOf: + - if: + not: + properties: + compatible: + contains: + const: qcom,qusb2-v2-phy + then: + properties: + qcom,imp-res-offset-value: false + qcom,bias-ctrl-value: false + qcom,charge-ctrl-value: false + qcom,hstx-trim-value: false + qcom,preemphasis-level: false + qcom,preemphasis-width: false + qcom,hsdisc-trim-value: false + additionalProperties: false examples: @@ -174,6 +194,7 @@ examples: <&gcc GCC_RX1_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; + vdd-supply = <&pm8994_l28>; vdda-pll-supply = <&pm8994_l12>; vdda-phy-dpdm-supply = <&pm8994_l24>; |