summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/phy
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/phy')
-rw-r--r--dts/Bindings/phy/meson-gxl-usb2-phy.txt4
-rw-r--r--dts/Bindings/phy/meson-gxl-usb3-phy.txt31
-rw-r--r--dts/Bindings/phy/nvidia,tegra20-usb-phy.txt4
-rw-r--r--dts/Bindings/phy/phy-hi3798cv200-combphy.txt59
-rw-r--r--dts/Bindings/phy/phy-hisi-inno-usb2.txt71
-rw-r--r--dts/Bindings/phy/phy-mapphone-mdm6600.txt29
-rw-r--r--dts/Bindings/phy/phy-mtk-tphy.txt4
-rw-r--r--dts/Bindings/phy/phy-rockchip-typec.txt35
-rw-r--r--dts/Bindings/phy/phy-stm32-usbphyc.txt73
-rw-r--r--dts/Bindings/phy/qcom-qmp-phy.txt6
-rw-r--r--dts/Bindings/phy/qcom-qusb2-phy.txt5
-rw-r--r--dts/Bindings/phy/rcar-gen3-phy-usb2.txt2
-rw-r--r--dts/Bindings/phy/rcar-gen3-phy-usb3.txt2
-rw-r--r--dts/Bindings/phy/sun4i-usb-phy.txt1
14 files changed, 297 insertions, 29 deletions
diff --git a/dts/Bindings/phy/meson-gxl-usb2-phy.txt b/dts/Bindings/phy/meson-gxl-usb2-phy.txt
index a105494a0f..b84a02ebff 100644
--- a/dts/Bindings/phy/meson-gxl-usb2-phy.txt
+++ b/dts/Bindings/phy/meson-gxl-usb2-phy.txt
@@ -6,6 +6,10 @@ Required properties:
- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
Optional properties:
+- clocks: a phandle to the clock of this PHY
+- clock-names: must be "phy"
+- resets: a phandle to the reset line of this PHY
+- reset-names: must be "phy"
- phy-supply: see phy-bindings.txt in this directory
diff --git a/dts/Bindings/phy/meson-gxl-usb3-phy.txt b/dts/Bindings/phy/meson-gxl-usb3-phy.txt
new file mode 100644
index 0000000000..114947e1de
--- /dev/null
+++ b/dts/Bindings/phy/meson-gxl-usb3-phy.txt
@@ -0,0 +1,31 @@
+* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding
+
+Required properties:
+- compatible: Should be "amlogic,meson-gxl-usb3-phy"
+- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
+- reg: The base address and length of the registers
+- interrupts: the interrupt specifier for the OTG detection
+- clocks: phandles to the clocks for
+ - the USB3 PHY
+ - and peripheral mode/OTG detection
+- clock-names: must contain "phy" and "peripheral"
+- resets: phandle to the reset lines for:
+ - the USB3 PHY and
+ - peripheral mode/OTG detection
+- reset-names: must contain "phy" and "peripheral"
+
+Optional properties:
+- phy-supply: see phy-bindings.txt in this directory
+
+
+Example:
+ usb3_phy0: phy@78080 {
+ compatible = "amlogic,meson-gxl-usb3-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x78080 0x0 0x20>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>;
+ clock-names = "phy", "peripheral";
+ resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>;
+ reset-names = "phy", "peripheral";
+ };
diff --git a/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt b/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt
index a9aa79fb90..1aa6f2674a 100644
--- a/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt
+++ b/dts/Bindings/phy/nvidia,tegra20-usb-phy.txt
@@ -21,7 +21,9 @@ Required properties :
- timer: The timeout clock (clk_m). Present if phy_type == utmi.
- utmi-pads: The clock needed to access the UTMI pad control registers.
Present if phy_type == utmi.
- - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2).
+ - ulpi-link: The clock Tegra provides to the ULPI PHY (usually pad DAP_MCLK2
+ with pad group aka "nvidia,pins" cdev2 and pin mux option config aka
+ "nvidia,function" pllp_out4).
Present if phy_type == ulpi, and ULPI link mode is in use.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
diff --git a/dts/Bindings/phy/phy-hi3798cv200-combphy.txt b/dts/Bindings/phy/phy-hi3798cv200-combphy.txt
new file mode 100644
index 0000000000..17b0c76137
--- /dev/null
+++ b/dts/Bindings/phy/phy-hi3798cv200-combphy.txt
@@ -0,0 +1,59 @@
+HiSilicon STB PCIE/SATA/USB3 PHY
+
+Required properties:
+- compatible: Should be "hisilicon,hi3798cv200-combphy"
+- reg: Should be the address space for COMBPHY configuration and state
+ registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and
+ PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC.
+- #phy-cells: Should be 1. The cell number is used to select the phy mode
+ as defined in <dt-bindings/phy/phy.h>.
+- clocks: The phandle to clock provider and clock specifier pair.
+- resets: The phandle to reset controller and reset specifier pair.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Optional properties:
+- hisilicon,fixed-mode: If the phy device doesn't support mode select
+ but a fixed mode setting, the property should be present to specify
+ the particular mode.
+- hisilicon,mode-select-bits: If the phy device support mode select,
+ this property should be present to specify the register bits in
+ peripheral controller, as a 3 integers tuple:
+ <register_offset bit_shift bit_mask>.
+
+Notes:
+- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only
+ one of them should be present.
+- The device node should be a child of peripheral controller that contains
+ COMBPHY configuration/state and PERI_CTRL register used to select PHY mode.
+ Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller
+ bindings.
+
+Examples:
+
+perictrl: peripheral-controller@8a20000 {
+ compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+ "simple-mfd";
+ reg = <0x8a20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8a20000 0x1000>;
+
+ combphy0: phy@850 {
+ compatible = "hisilicon,hi3798cv200-combphy";
+ reg = <0x850 0x8>;
+ #phy-cells = <1>;
+ clocks = <&crg HISTB_COMBPHY0_CLK>;
+ resets = <&crg 0x188 4>;
+ hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+ };
+
+ combphy1: phy@858 {
+ compatible = "hisilicon,hi3798cv200-combphy";
+ reg = <0x858 0x8>;
+ #phy-cells = <1>;
+ clocks = <&crg HISTB_COMBPHY1_CLK>;
+ resets = <&crg 0x188 12>;
+ hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+ };
+};
diff --git a/dts/Bindings/phy/phy-hisi-inno-usb2.txt b/dts/Bindings/phy/phy-hisi-inno-usb2.txt
new file mode 100644
index 0000000000..0d70c83410
--- /dev/null
+++ b/dts/Bindings/phy/phy-hisi-inno-usb2.txt
@@ -0,0 +1,71 @@
+Device tree bindings for HiSilicon INNO USB2 PHY
+
+Required properties:
+- compatible: Should be one of the following strings:
+ "hisilicon,inno-usb2-phy",
+ "hisilicon,hi3798cv200-usb2-phy".
+- reg: Should be the address space for PHY configuration register in peripheral
+ controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
+- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
+ reference clock.
+- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
+ signal.
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+
+The INNO USB2 PHY device should be a child node of peripheral controller that
+contains the PHY configuration register, and each device suppports up to 2 PHY
+ports which are represented as child nodes of INNO USB2 PHY device.
+
+Required properties for PHY port node:
+- reg: The PHY port instance number.
+- #phy-cells: Defined by generic PHY bindings. Must be 0.
+- resets: The phandle and reset specifier pair for PHY port reset signal.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+perictrl: peripheral-controller@8a20000 {
+ compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";
+ reg = <0x8a20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8a20000 0x1000>;
+
+ usb2_phy1: usb2-phy@120 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x120 0x4>;
+ clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+ resets = <&crg 0xbc 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_phy1_port0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 8>;
+ };
+
+ usb2_phy1_port1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 9>;
+ };
+ };
+
+ usb2_phy2: usb2-phy@124 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x124 0x4>;
+ clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+ resets = <&crg 0xbc 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_phy2_port0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 10>;
+ };
+ };
+};
diff --git a/dts/Bindings/phy/phy-mapphone-mdm6600.txt b/dts/Bindings/phy/phy-mapphone-mdm6600.txt
new file mode 100644
index 0000000000..29427d4f04
--- /dev/null
+++ b/dts/Bindings/phy/phy-mapphone-mdm6600.txt
@@ -0,0 +1,29 @@
+Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY
+
+Required properties:
+- compatible Must be "motorola,mapphone-mdm6600"
+- enable-gpios GPIO to enable the USB PHY
+- power-gpios GPIO to power on the device
+- reset-gpios GPIO to reset the device
+- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for
+ normal mode versus USB flashing mode
+- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600
+- motorola,status-gpios Three GPIOs to read the power state of the MDM6600
+
+Example:
+
+usb-phy {
+ compatible = "motorola,mapphone-mdm6600";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+};
diff --git a/dts/Bindings/phy/phy-mtk-tphy.txt b/dts/Bindings/phy/phy-mtk-tphy.txt
index 41e09ed2ca..0d34b2b4a6 100644
--- a/dts/Bindings/phy/phy-mtk-tphy.txt
+++ b/dts/Bindings/phy/phy-mtk-tphy.txt
@@ -27,6 +27,10 @@ Optional properties (controller (parent) node):
- reg : offset and length of register shared by multiple ports,
exclude port's private register. It is needed on mt2701
and mt8173, but not on mt2712.
+ - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
+ calibrate
+ - mediatek,src-coef : coefficient for slew rate calibrate, depends on
+ SoC process
Required properties (port (child) node):
- reg : address and length of the register set for the port.
diff --git a/dts/Bindings/phy/phy-rockchip-typec.txt b/dts/Bindings/phy/phy-rockchip-typec.txt
index 6ea867e317..960da7fcaa 100644
--- a/dts/Bindings/phy/phy-rockchip-typec.txt
+++ b/dts/Bindings/phy/phy-rockchip-typec.txt
@@ -14,25 +14,9 @@ Required properties:
- resets : a list of phandle + reset specifier pairs
- reset-names : string reset name, must be:
"uphy", "uphy-pipe", "uphy-tcphy"
- - extcon : extcon specifier for the Power Delivery
-Note, there are 2 type-c phys for RK3399, and they are almost identical, except
-these registers(description below), every register node contains 3 sections:
-offset, enable bit, write mask bit.
- - rockchip,typec-conn-dir : the register of type-c connector direction,
- for type-c phy0, it must be <0xe580 0 16>;
- for type-c phy1, it must be <0xe58c 0 16>;
- - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
- control.
- for type-c phy0, it must be <0xe580 3 19>;
- for type-c phy1, it must be <0xe58c 3 19>;
- - rockchip,external-psm : the register of type-c phy external psm clock
- selection.
- for type-c phy0, it must be <0xe588 14 30>;
- for type-c phy1, it must be <0xe594 14 30>;
- - rockchip,pipe-status : the register of type-c phy pipe status.
- for type-c phy0, it must be <0xe5c0 0 0>;
- for type-c phy1, it must be <0xe5c0 16 16>;
+Optional properties:
+ - extcon : extcon specifier for the Power Delivery
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify dp or usb3 port,
@@ -43,6 +27,13 @@ Required nodes : a sub-node is required for each port the phy provides.
Required properties (port (child) node):
- #phy-cells : must be 0, See ./phy-bindings.txt for details.
+Deprecated properties, do not use in new device tree sources, these
+properties are determined by the compatible value:
+ - rockchip,typec-conn-dir
+ - rockchip,usb3tousb2-en
+ - rockchip,external-psm
+ - rockchip,pipe-status
+
Example:
tcphy0: phy@ff7c0000 {
compatible = "rockchip,rk3399-typec-phy";
@@ -58,10 +49,6 @@ Example:
<&cru SRST_UPHY0_PIPE_L00>,
<&cru SRST_P_UPHY0_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
- rockchip,typec-conn-dir = <0xe580 0 16>;
- rockchip,usb3tousb2-en = <0xe580 3 19>;
- rockchip,external-psm = <0xe588 14 30>;
- rockchip,pipe-status = <0xe5c0 0 0>;
tcphy0_dp: dp-port {
#phy-cells = <0>;
@@ -86,10 +73,6 @@ Example:
<&cru SRST_UPHY1_PIPE_L00>,
<&cru SRST_P_UPHY1_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
- rockchip,typec-conn-dir = <0xe58c 0 16>;
- rockchip,usb3tousb2-en = <0xe58c 3 19>;
- rockchip,external-psm = <0xe594 14 30>;
- rockchip,pipe-status = <0xe5c0 16 16>;
tcphy1_dp: dp-port {
#phy-cells = <0>;
diff --git a/dts/Bindings/phy/phy-stm32-usbphyc.txt b/dts/Bindings/phy/phy-stm32-usbphyc.txt
new file mode 100644
index 0000000000..725ae71ae6
--- /dev/null
+++ b/dts/Bindings/phy/phy-stm32-usbphyc.txt
@@ -0,0 +1,73 @@
+STMicroelectronics STM32 USB HS PHY controller
+
+The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+switch. It controls PHY configuration and status, and the UTMI+ switch that
+selects either OTG or HOST controller for the second PHY port. It also sets
+PLL configuration.
+
+USBPHYC
+ |_ PLL
+ |
+ |_ PHY port#1 _________________ HOST controller
+ | _ |
+ | / 1|________________|
+ |_ PHY port#2 ----| |________________
+ | \_0| |
+ |_ UTMI switch_______| OTG controller
+
+
+Phy provider node
+=================
+
+Required properties:
+- compatible: must be "st,stm32mp1-usbphyc"
+- reg: address and length of the usb phy control register set
+- clocks: phandle + clock specifier for the PLL phy clock
+- #address-cells: number of address cells for phys sub-nodes, must be <1>
+- #size-cells: number of size cells for phys sub-nodes, must be <0>
+
+Optional properties:
+- assigned-clocks: phandle + clock specifier for the PLL phy clock
+- assigned-clock-parents: the PLL phy clock parent
+- resets: phandle + reset specifier
+
+Required nodes: one sub-node per port the controller provides.
+
+Phy sub-nodes
+==============
+
+Required properties:
+- reg: phy port index
+- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
+ see phy-bindings.txt in the same directory.
+- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
+- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
+- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
+ port#1 and must be <1> for PHY port#2, to select USB controller
+
+
+Example:
+ usbphyc: usb-phy@5a006000 {
+ compatible = "st,stm32mp1-usbphyc";
+ reg = <0x5a006000 0x1000>;
+ clocks = <&rcc_clk USBPHY_K>;
+ resets = <&rcc_rst USBPHY_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphyc_port0: usb-phy@0 {
+ reg = <0>;
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>
+ #phy-cells = <0>;
+ };
+
+ usbphyc_port1: usb-phy@1 {
+ reg = <1>;
+ phy-supply = <&vdd_usb>;
+ vdda1v1-supply = <&reg11>;
+ vdda1v8-supply = <&reg18>
+ #phy-cells = <1>;
+ };
+ };
diff --git a/dts/Bindings/phy/qcom-qmp-phy.txt b/dts/Bindings/phy/qcom-qmp-phy.txt
index b6a9f2b92b..dcf1b8f691 100644
--- a/dts/Bindings/phy/qcom-qmp-phy.txt
+++ b/dts/Bindings/phy/qcom-qmp-phy.txt
@@ -8,7 +8,8 @@ Required properties:
- compatible: compatible list, contains:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
- "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
+ "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+ "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
- reg: offset and length of register set for PHY's common serdes block.
@@ -25,10 +26,13 @@ Required properties:
- clock-names: "cfg_ahb" for phy config clock,
"aux" for phy aux clock,
"ref" for 19.2 MHz ref clk,
+ "com_aux" for phy common block aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref".
+ For "qcom,qmp-v3-usb3-phy" must contain:
+ "aux", "cfg_ahb", "ref", "com_aux".
- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
diff --git a/dts/Bindings/phy/qcom-qusb2-phy.txt b/dts/Bindings/phy/qcom-qusb2-phy.txt
index aa0fcb05ac..42c9742683 100644
--- a/dts/Bindings/phy/qcom-qusb2-phy.txt
+++ b/dts/Bindings/phy/qcom-qusb2-phy.txt
@@ -4,7 +4,10 @@ Qualcomm QUSB2 phy controller
QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- - compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
+ - compatible: compatible list, contains
+ "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+ "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
+
- reg: offset and length of the PHY register set.
- #phy-cells: must be 0.
diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
index 99b651b331..dbd137c079 100644
--- a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
@@ -8,6 +8,8 @@ Required properties:
SoC.
"renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
SoC.
+ "renesas,usb2-phy-r8a77965" if the device is a part of an
+ R8A77965 SoC.
"renesas,usb2-phy-r8a77995" if the device is a part of an
R8A77995 SoC.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb3.txt b/dts/Bindings/phy/rcar-gen3-phy-usb3.txt
index f94cea48f6..47dd296ece 100644
--- a/dts/Bindings/phy/rcar-gen3-phy-usb3.txt
+++ b/dts/Bindings/phy/rcar-gen3-phy-usb3.txt
@@ -11,6 +11,8 @@ Required properties:
SoC.
"renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
SoC.
+ "renesas,r8a77965-usb3-phy" if the device is a part of an
+ R8A77965 SoC.
"renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible
device.
diff --git a/dts/Bindings/phy/sun4i-usb-phy.txt b/dts/Bindings/phy/sun4i-usb-phy.txt
index c1ce5a0a65..07ca4ec4a7 100644
--- a/dts/Bindings/phy/sun4i-usb-phy.txt
+++ b/dts/Bindings/phy/sun4i-usb-phy.txt
@@ -11,6 +11,7 @@ Required properties:
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-a83t-usb-phy
* allwinner,sun8i-h3-usb-phy
+ * allwinner,sun8i-r40-usb-phy
* allwinner,sun8i-v3s-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-24 11:33:46 +0000