summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/phy
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/phy')
-rw-r--r--dts/Bindings/phy/samsung-phy.txt47
-rw-r--r--dts/Bindings/phy/sun4i-usb-phy.txt23
-rw-r--r--dts/Bindings/phy/ti-phy.txt7
3 files changed, 71 insertions, 6 deletions
diff --git a/dts/Bindings/phy/samsung-phy.txt b/dts/Bindings/phy/samsung-phy.txt
index b422e38946..2049261d8c 100644
--- a/dts/Bindings/phy/samsung-phy.txt
+++ b/dts/Bindings/phy/samsung-phy.txt
@@ -114,3 +114,50 @@ Example:
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
+
+Samsung Exynos5 SoC series USB DRD PHY controller
+--------------------------------------------------
+
+Required properties:
+- compatible : Should be set to one of the following supported values:
+ - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
+ - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
+- reg : Register offset and length of USB DRD PHY register set;
+- clocks: Clock IDs array as required by the controller
+- clock-names: names of clocks correseponding to IDs in the clock property;
+ Required clocks:
+ - phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
+ used for register access.
+ - ref: PHY's reference clock (usually crystal clock), used for
+ PHY operations, associated by phy name. It is used to
+ determine bit values for clock settings register.
+ For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
+- samsung,pmu-syscon: phandle for PMU system controller interface, used to
+ control pmu registers for power isolation.
+- #phy-cells : from the generic PHY bindings, must be 1;
+
+For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
+compatible PHYs, the second cell in the PHY specifier identifies the
+PHY id, which is interpreted as follows:
+ 0 - UTMI+ type phy,
+ 1 - PIPE3 type phy,
+
+Example:
+ usbdrd_phy: usbphy@12100000 {
+ compatible = "samsung,exynos5250-usbdrd-phy";
+ reg = <0x12100000 0x100>;
+ clocks = <&clock 286>, <&clock 1>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ };
+
+- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
+ 'usbdrd_phy' nodes should have numbered alias in the aliases node,
+ in the form of usbdrdphyN, N = 0, 1... (depending on number of
+ controllers).
+Example:
+ aliases {
+ usbdrdphy0 = &usb3_phy0;
+ usbdrdphy1 = &usb3_phy1;
+ };
diff --git a/dts/Bindings/phy/sun4i-usb-phy.txt b/dts/Bindings/phy/sun4i-usb-phy.txt
index a82361b620..16528b9eb5 100644
--- a/dts/Bindings/phy/sun4i-usb-phy.txt
+++ b/dts/Bindings/phy/sun4i-usb-phy.txt
@@ -2,15 +2,26 @@ Allwinner sun4i USB PHY
-----------------------
Required properties:
-- compatible : should be one of "allwinner,sun4i-a10-usb-phy",
- "allwinner,sun5i-a13-usb-phy" or "allwinner,sun7i-a20-usb-phy"
+- compatible : should be one of
+ * allwinner,sun4i-a10-usb-phy
+ * allwinner,sun5i-a13-usb-phy
+ * allwinner,sun6i-a31-usb-phy
+ * allwinner,sun7i-a20-usb-phy
- reg : a list of offset + length pairs
-- reg-names : "phy_ctrl", "pmu1" and for sun4i or sun7i "pmu2"
+- reg-names :
+ * "phy_ctrl"
+ * "pmu1"
+ * "pmu2" for sun4i, sun6i or sun7i
- #phy-cells : from the generic phy bindings, must be 1
-- clocks : phandle + clock specifier for the phy clock
-- clock-names : "usb_phy"
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names :
+ * "usb_phy" for sun4i, sun5i or sun7i
+ * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
- resets : a list of phandle + reset specifier pairs
-- reset-names : "usb0_reset", "usb1_reset" and for sun4i or sun7i "usb2_reset"
+- reset-names :
+ * "usb0_reset"
+ * "usb1_reset"
+ * "usb2_reset" for sun4i, sun6i or sun7i
Example:
usbphy: phy@0x01c13400 {
diff --git a/dts/Bindings/phy/ti-phy.txt b/dts/Bindings/phy/ti-phy.txt
index 788fb0fa37..9ce458f329 100644
--- a/dts/Bindings/phy/ti-phy.txt
+++ b/dts/Bindings/phy/ti-phy.txt
@@ -32,6 +32,11 @@ Required properties:
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+ - clock-names: should include:
+ * "wkupclk" - wakeup clock.
+ * "refclk" - reference clock (optional).
Optional properties:
- ctrl-module : phandle of the control module used by PHY driver to power on
@@ -44,6 +49,8 @@ usb2phy@4a0ad080 {
reg = <0x4a0ad080 0x58>;
ctrl-module = <&omap_control_usb>;
#phy-cells = <0>;
+ clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk", "refclk";
};
TI PIPE3 PHY