diff options
Diffstat (limited to 'dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml')
| -rw-r--r-- | dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml new file mode 100644 index 0000000000..cd0503b6fe --- /dev/null +++ b/dts/Bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Pin Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#gpio-cells": + const: 3 + description: + GPIO consumers must use three arguments, first the number of the + bank, then the pin number inside that bank, and finally the GPIO + flags. + + "#interrupt-cells": + const: 3 + description: + Interrupts consumers must use three arguments, first the number + of the bank, then the pin number inside that bank, and finally + the interrupts flags. + + compatible: + enum: + - allwinner,sun4i-a10-pinctrl + - allwinner,sun5i-a10s-pinctrl + - allwinner,sun5i-a13-pinctrl + - allwinner,sun6i-a31-pinctrl + - allwinner,sun6i-a31-r-pinctrl + - allwinner,sun6i-a31s-pinctrl + - allwinner,sun7i-a20-pinctrl + - allwinner,sun8i-a23-pinctrl + - allwinner,sun8i-a23-r-pinctrl + - allwinner,sun8i-a33-pinctrl + - allwinner,sun8i-a83t-pinctrl + - allwinner,sun8i-a83t-r-pinctrl + - allwinner,sun8i-h3-pinctrl + - allwinner,sun8i-h3-r-pinctrl + - allwinner,sun8i-r40-pinctrl + - allwinner,sun8i-v3-pinctrl + - allwinner,sun8i-v3s-pinctrl + - allwinner,sun9i-a80-pinctrl + - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun50i-a64-pinctrl + - allwinner,sun50i-a64-r-pinctrl + - allwinner,sun50i-h5-pinctrl + - allwinner,sun50i-h6-pinctrl + - allwinner,sun50i-h6-r-pinctrl + - allwinner,suniv-f1c100s-pinctrl + - nextthing,gr8-pinctrl + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 5 + description: + One interrupt per external interrupt bank supported on the + controller, sorted by bank number ascending order. + + clocks: + items: + - description: Bus Clock + - description: High Frequency Oscillator + - description: Low Frequency Oscillator + + clock-names: + items: + - const: apb + - const: hosc + - const: losc + + resets: + maxItems: 1 + + gpio-controller: true + interrupt-controller: true + gpio-line-names: true + + input-debounce: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 5 + description: + Debouncing periods in microseconds, one period per interrupt + bank found in the controller + +patternProperties: + # It's pretty scary, but the basic idea is that: + # - One node name can start with either s- or r- for PRCM nodes, + # - Then, the name itself can be any repetition of <string>- (to + # accomodate with nodes like uart4-rts-cts-pins), where each + # string can be either starting with 'p' but in a string longer + # than 3, or something that doesn't start with 'p', + # - Then, the bank name is optional and will be between pa and pg, + # pl or pm. Some pins groups that have several options will have + # the pin numbers then, + # - Finally, the name will end with either -pin or pins. + + "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$": + type: object + + properties: + pins: true + function: true + bias-disable: true + bias-pull-up: true + bias-pull-down: true + + drive-strength: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 10, 20, 30, 40 ] + + required: + - pins + - function + + additionalProperties: false + + "^vcc-p[a-hlm]-supply$": + description: + Power supplies for pin banks. + +required: + - "#gpio-cells" + - "#interrupt-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - gpio-controller + - interrupt-controller + +allOf: + # FIXME: We should have the pin bank supplies here, but not a lot of + # boards are defining it at the moment so it would generate a lot of + # warnings. + + - if: + properties: + compatible: + enum: + - allwinner,sun9i-a80-pinctrl + + then: + properties: + interrupts: + minItems: 5 + maxItems: 5 + + else: + if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-pinctrl + - allwinner,sun6i-a31s-pinctrl + - allwinner,sun50i-h6-pinctrl + + then: + properties: + interrupts: + minItems: 4 + maxItems: 4 + + else: + if: + properties: + compatible: + enum: + - allwinner,sun8i-a23-pinctrl + - allwinner,sun8i-a83t-pinctrl + - allwinner,sun50i-a64-pinctrl + - allwinner,sun50i-h5-pinctrl + - allwinner,suniv-f1c100s-pinctrl + + then: + properties: + interrupts: + minItems: 3 + maxItems: 3 + + else: + if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-r-pinctrl + - allwinner,sun8i-a33-pinctrl + - allwinner,sun8i-h3-pinctrl + - allwinner,sun8i-v3-pinctrl + - allwinner,sun8i-v3s-pinctrl + - allwinner,sun9i-a80-r-pinctrl + - allwinner,sun50i-h6-r-pinctrl + + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + + else: + properties: + interrupts: + minItems: 1 + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun5i-ccu.h> + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun5i-a13-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + uart1_pe_pins: uart1-pe-pins { + pins = "PE10", "PE11"; + function = "uart1"; + }; + + uart1_pg_pins: uart1-pg-pins { + pins = "PG3", "PG4"; + function = "uart1"; + }; + }; |