diff options
Diffstat (limited to 'dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt')
-rw-r--r-- | dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt | 41 |
1 files changed, 0 insertions, 41 deletions
diff --git a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt b/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt deleted file mode 100644 index db99bd95d4..0000000000 --- a/dts/Bindings/pinctrl/mscc,ocelot-pinctrl.txt +++ /dev/null @@ -1,41 +0,0 @@ -Microsemi Ocelot pin controller Device Tree Bindings ----------------------------------------------------- - -Required properties: - - compatible : Should be "mscc,ocelot-pinctrl", - "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl", - "mscc,luton-pinctrl" or "mscc,serval-pinctrl" - - reg : Address and length of the register set for the device - - gpio-controller : Indicates this device is a GPIO controller - - #gpio-cells : Must be 2. - The first cell is the pin number and the - second cell specifies GPIO flags, as defined in - <dt-bindings/gpio/gpio.h>. - - gpio-ranges : Range of pins managed by the GPIO controller. - - -The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin -configuration documented in pinctrl-bindings.txt. - -The following generic properties are supported: - - function - - pins - -Example: - gpio: pinctrl@71070034 { - compatible = "mscc,ocelot-pinctrl"; - reg = <0x71070034 0x28>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&gpio 0 0 22>; - - uart_pins: uart-pins { - pins = "GPIO_6", "GPIO_7"; - function = "uart"; - }; - - uart2_pins: uart2-pins { - pins = "GPIO_12", "GPIO_13"; - function = "uart2"; - }; - }; |