summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pinctrl/pinctrl-atlas7.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/pinctrl/pinctrl-atlas7.txt')
-rw-r--r--dts/Bindings/pinctrl/pinctrl-atlas7.txt109
1 files changed, 109 insertions, 0 deletions
diff --git a/dts/Bindings/pinctrl/pinctrl-atlas7.txt b/dts/Bindings/pinctrl/pinctrl-atlas7.txt
new file mode 100644
index 0000000000..eecf028ff4
--- /dev/null
+++ b/dts/Bindings/pinctrl/pinctrl-atlas7.txt
@@ -0,0 +1,109 @@
+CSR SiRFatlas7 pinmux controller
+
+Required properties:
+- compatible : "sirf,atlas7-ioc"
+- reg : Address range of the pinctrl registers
+
+For example, pinctrl might have properties like the following:
+ pinctrl: ioc@18880000 {
+ compatible = "sirf,atlas7-ioc";
+ reg = <0x18880000 0x1000>;
+
+ a_ac97_pmx: ac97@0 {
+ ac97 {
+ groups = "audio_ac97_grp";
+ function = "audio_ac97";
+ };
+ };
+
+ ...
+
+ sd2_pmx: sd2@0 {
+ sd2 {
+ groups = "sd2_grp0";
+ function = "sd2";
+ };
+ };
+
+ ...
+
+
+ sample0_cfg: sample0@0 {
+ sample0 {
+ pins = "ldd_0", "ldd_1";
+ bias-pull-up;
+ };
+ };
+
+ sample1_cfg: sample1@0 {
+ sample1 {
+ pins = "ldd_2", "ldd_3";
+ input-schmitt-enable;
+ };
+ };
+
+ sample2_cfg: sample2@0 {
+ sample2 {
+ groups = "uart4_nopause_grp";
+ bias-pull-down;
+ };
+ };
+
+ sample3_cfg: sample3@0 {
+ sample3 {
+ pins = "ldd_4", "ldd_5";
+ drive-strength = <2>;
+ };
+ };
+ };
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- groups : An array of strings. Each string contains the name of a group.
+- function: A string containing the name of the function to mux to the
+ group.
+
+ Valid values for group and function names can be found from looking at the
+ group and function arrays in driver files:
+ drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ sd0_pmx: sd0@0 {
+ sd0 {
+ groups = "sd0_grp";
+ function = "sd0";
+ };
+ };
+
+ sd1_pmx0: sd1@0 {
+ sd1 {
+ groups = "sd1_grp0";
+ function = "sd1_m0";
+ };
+ };
+
+ sd1_pmx1: sd1@1 {
+ sd1 {
+ groups = "sd1_grp1";
+ function = "sd1_m1";
+ };
+ };
+
+For a specific board, if it wants to use sd1,
+it can add the following to its board-specific .dts file.
+sd1: sd@0x12340000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_pmx0>;
+}
+
+or
+
+sd1: sd@0x12340000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_pmx1>;
+}