1 files changed, 0 insertions, 84 deletions
diff --git a/dts/Bindings/pinctrl/pinctrl-zx.txt b/dts/Bindings/pinctrl/pinctrl-zx.txt
deleted file mode 100644
index 39170f3725..0000000000
--- a/dts/Bindings/pinctrl/pinctrl-zx.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* ZTE ZX Pin Controller
-
-The pin controller on ZTE ZX platforms is kinda of hybrid.  It consists of
-a main controller and an auxiliary one.  For example, on ZX296718 SoC, the
-main controller is TOP_PMM and the auxiliary one is AON_IOCFG.  Both
-controllers work together to control pin multiplexing and configuration in
-the way illustrated as below.
-
-
-           GMII_RXD3 ---+
-                        |
-             DVI1_HS ---+----------------------------- GMII_RXD3 (TOP pin)
-                        |
-             BGPIO16 ---+                               ^
-                                                        | pinconf
-                        ^                               |
-                        | pinmux                        |
-                        |                               |
-
-                   TOP_PMM (main)           AON_IOCFG (aux)
-
-                        |                       |       |
-                        |                pinmux |       |
-                        | pinmux                v       |
-                        v                               | pinconf
-                                    KEY_ROW2 ---+       v
-        PORT1_LCD_TE ---+                       |
-                        |            AGPIO10 ---+------ KEY_ROW2 (AON pin)
-          I2S0_DOUT3 ---+                       |
-                        |-----------------------+
-            PWM_OUT3 ---+
-                        |
-             VGA_VS1 ---+
-
-
-For most of pins like GMII_RXD3 in the figure, the pinmux function is
-controlled by TOP_PMM block only, and this type of pins are meant by term
-'TOP pins'.  For pins like KEY_ROW2, the pinmux is controlled by both
-TOP_PMM and AON_IOCFG blocks, as the available multiplexing functions for
-the pin spread in both controllers.  This type of pins are called 'AON pins'.
-Though pinmux implementation is quite different, pinconf is same for both
-types of pins.  Both are controlled by auxiliary controller, i.e. AON_IOCFG
-on ZX296718.
-
-Required properties:
-- compatible: should be "zte,zx296718-pmm".
-- reg: the register physical address and length.
-- zte,auxiliary-controller: phandle to the auxiliary pin controller which
-  implements pinmux for AON pins and pinconf for all pins.
-
-The following pin configuration are supported. Please refer to
-pinctrl-bindings.txt in this directory for more details of the common
-pinctrl bindings used by client devices.
-
-- bias-pull-up
-- bias-pull-down
-- drive-strength
-- input-enable
-- slew-rate
-
-Examples:
-
-iocfg: pin-controller@119000 {
-	compatible = "zte,zx296718-iocfg";
-	reg = <0x119000 0x1000>;
-};
-
-pmm: pin-controller@1462000 {
-	compatible = "zte,zx296718-pmm";
-	reg = <0x1462000 0x1000>;
-	zte,auxiliary-controller = <&iocfg>;
-};
-
-&pmm {
-	vga_pins: vga {
-		pins = "KEY_COL1", "KEY_COL2", "KEY_ROW1", "KEY_ROW2";
-		function = "VGA";
-	};
-};
-
-&vga {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vga_pins>;
-};