summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/pinctrl/qcom,pmic-mpp.txt')
-rw-r--r--dts/Bindings/pinctrl/qcom,pmic-mpp.txt187
1 files changed, 0 insertions, 187 deletions
diff --git a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt b/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
deleted file mode 100644
index 5363d44cbb..0000000000
--- a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-Qualcomm PMIC Multi-Purpose Pin (MPP) block
-
-This binding describes the MPP block(s) found in the 8xxx series
-of PMIC's from Qualcomm.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Should contain one of:
- "qcom,pm8018-mpp",
- "qcom,pm8019-mpp",
- "qcom,pm8038-mpp",
- "qcom,pm8058-mpp",
- "qcom,pm8821-mpp",
- "qcom,pm8841-mpp",
- "qcom,pm8916-mpp",
- "qcom,pm8917-mpp",
- "qcom,pm8921-mpp",
- "qcom,pm8941-mpp",
- "qcom,pm8950-mpp",
- "qcom,pmi8950-mpp",
- "qcom,pm8994-mpp",
- "qcom,pma8084-mpp",
- "qcom,pmi8994-mpp",
-
- And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp"
- if the device is on an spmi bus or an ssbi bus respectively.
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Register base of the MPP block and length.
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Must contain an array of encoded interrupt specifiers for
- each available MPP
-
-- gpio-controller:
- Usage: required
- Value type: <none>
- Definition: Mark the device node as a GPIO controller
-
-- #gpio-cells:
- Usage: required
- Value type: <u32>
- Definition: Must be 2;
- the first cell will be used to define MPP number and the
- second denotes the flags for this MPP
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin or a list of pins. This configuration can include the
-mux function to select on those pin(s), and various pin configuration
-parameters, as listed below.
-
-SUBNODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
- Usage: required
- Value type: <string-array>
- Definition: List of MPP pins affected by the properties specified in
- this subnode. Valid pins are:
- mpp1-mpp4 for pm8841
- mpp1-mpp4 for pm8916
- mpp1-mpp8 for pm8941
- mpp1-mpp4 for pm8950
- mpp1-mpp4 for pmi8950
- mpp1-mpp4 for pma8084
-
-- function:
- Usage: required
- Value type: <string>
- Definition: Specify the alternative function to be configured for the
- specified pins. Valid values are:
- "digital",
- "analog",
- "sink"
-
-- bias-disable:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configured as no pull.
-
-- bias-pull-up:
- Usage: optional
- Value type: <u32>
- Definition: The specified pins should be configured as pull up.
- Valid values are 600, 10000 and 30000 in bidirectional mode
- only, i.e. when operating in qcom,analog-mode and input and
- outputs are enabled. The hardware ignores the configuration
- when operating in other modes.
-
-- bias-high-impedance:
- Usage: optional
- Value type: <none>
- Definition: The specified pins will put in high-Z mode and disabled.
-
-- input-enable:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are put in input mode, i.e. their input
- buffer is enabled
-
-- output-high:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- high.
-
-- output-low:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- low.
-
-- power-source:
- Usage: optional
- Value type: <u32>
- Definition: Selects the power source for the specified pins. Valid power
- sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-
-- qcom,analog-level:
- Usage: optional
- Value type: <u32>
- Definition: Selects the source for analog output. Valued values are
- defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
- PMIC_MPP_AOUT_LVL_*
-
-- qcom,dtest:
- Usage: optional
- Value type: <u32>
- Definition: Selects which dtest rail to be routed in the various functions.
- Valid values are 1-4
-
-- qcom,amux-route:
- Usage: optional
- Value type: <u32>
- Definition: Selects the source for analog input. Valid values are
- defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
- PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
-- qcom,paired:
- Usage: optional
- Value type: <none>
- Definition: Indicates that the pin should be operating in paired mode.
-
-Example:
-
- mpps@a000 {
- compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
- reg = <0xa000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pm8841_default>;
-
- pm8841_default: default {
- gpio {
- pins = "mpp1", "mpp2", "mpp3", "mpp4";
- function = "digital";
- input-enable;
- power-source = <PM8841_MPP_S3>;
- };
- };
- };