diff options
Diffstat (limited to 'dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt')
| -rw-r--r-- | dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt deleted file mode 100644 index d75476e245..0000000000 --- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt +++ /dev/null @@ -1,188 +0,0 @@ -* Renesas Pin Function Controller (GPIO and Pin Mux/Config) - -The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0, -R8A73A4 and R8A7740 it also acts as a GPIO controller. - - -Pin Control ------------ - -Required Properties: - - - compatible: should be one of the following. - - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller. - - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller. - - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller. - - "renesas,pfc-r8a7742": for R8A7742 (RZ/G1H) compatible pin-controller. - - "renesas,pfc-r8a7743": for R8A7743 (RZ/G1M) compatible pin-controller. - - "renesas,pfc-r8a7744": for R8A7744 (RZ/G1N) compatible pin-controller. - - "renesas,pfc-r8a7745": for R8A7745 (RZ/G1E) compatible pin-controller. - - "renesas,pfc-r8a77470": for R8A77470 (RZ/G1C) compatible pin-controller. - - "renesas,pfc-r8a774a1": for R8A774A1 (RZ/G2M) compatible pin-controller. - - "renesas,pfc-r8a774b1": for R8A774B1 (RZ/G2N) compatible pin-controller. - - "renesas,pfc-r8a774c0": for R8A774C0 (RZ/G2E) compatible pin-controller. - - "renesas,pfc-r8a774e1": for R8A774E1 (RZ/G2H) compatible pin-controller. - - "renesas,pfc-r8a7778": for R8A7778 (R-Car M1) compatible pin-controller. - - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. - - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller. - - "renesas,pfc-r8a7792": for R8A7792 (R-Car V2H) compatible pin-controller. - - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller. - - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller. - - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller. - - "renesas,pfc-r8a7796": for R8A77960 (R-Car M3-W) compatible pin-controller. - - "renesas,pfc-r8a77961": for R8A77961 (R-Car M3-W+) compatible pin-controller. - - "renesas,pfc-r8a77965": for R8A77965 (R-Car M3-N) compatible pin-controller. - - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller. - - "renesas,pfc-r8a77980": for R8A77980 (R-Car V3H) compatible pin-controller. - - "renesas,pfc-r8a77990": for R8A77990 (R-Car E3) compatible pin-controller. - - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller. - - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. - - - reg: Base address and length of each memory resource used by the pin - controller hardware module. - -Optional properties: - - - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden - otherwise. Should be 3. - - - interrupts-extended: Specify the interrupts associated with external - IRQ pins. This property is mandatory when the PFC handles GPIOs and - forbidden otherwise. When specified, it must contain one interrupt per - external IRQ, sorted by external IRQ number. - -The PFC node also acts as a container for pin configuration nodes. Please refer -to pinctrl-bindings.txt in this directory for the definition of the term "pin -configuration node" and for the common pinctrl bindings used by client devices. - -Each pin configuration node represents a desired configuration for a pin, a -pin group, or a list of pins or pin groups. The configuration can include the -function to select on those pin(s) and pin configuration parameters (such as -pull-up and pull-down). - -Pin configuration nodes contain pin configuration properties, either directly -or grouped in child subnodes. Both pin muxing and configuration parameters can -be grouped in that way and referenced as a single pin configuration node by -client devices. - -A configuration node or subnode must reference at least one pin (through the -pins or pin groups properties) and contain at least a function or one -configuration parameter. When the function is present only pin groups can be -used to reference pins. - -All pin configuration nodes and subnodes names are ignored. All of those nodes -are parsed through phandles and processed purely based on their content. - -Pin Configuration Node Properties: - -- pins : An array of strings, each string containing the name of a pin. -- groups : An array of strings, each string containing the name of a pin - group. - -- function: A string containing the name of the function to mux to the pin - group(s) specified by the groups property. - - Valid values for pin, group and function names can be found in the group and - function arrays of the PFC data file corresponding to the SoC - (drivers/pinctrl/sh-pfc/pfc-*.c) - -The pin configuration parameters use the generic pinconf bindings defined in -pinctrl-bindings.txt in this directory. The supported parameters are -bias-disable, bias-pull-up, bias-pull-down, drive-strength and power-source. For -pins that have a configurable I/O voltage, the power-source value should be the -nominal I/O voltage in millivolts. - - -GPIO ----- - -On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node. - -Required Properties: - - - gpio-controller: Marks the device node as a gpio controller. - - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - -The syntax of the gpio specifier used by client nodes should be the following -with values derived from the SoC user manual. - - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [flags]> - -On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver. -Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml -for documentation of the GPIO device tree bindings on those platforms. - - -Examples --------- - -Example 1: SH73A0 (SH-Mobile AG5) pin controller node - - pfc: pin-controller@e6050000 { - compatible = "renesas,pfc-sh73a0"; - reg = <0xe6050000 0x8000>, - <0xe605801c 0x1c>; - gpio-controller; - #gpio-cells = <2>; - interrupts-extended = - <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, - <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, - <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, - <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, - <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, - <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, - <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, - <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; - }; - -Example 2: A GPIO LED node that references a GPIO - - #include <dt-bindings/gpio/gpio.h> - - leds { - compatible = "gpio-leds"; - led1 { - gpios = <&pfc 20 GPIO_ACTIVE_LOW>; - }; - }; - -Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps - for the MMCIF and SCIFA4 devices - - &pfc { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - - mmcif_pins: mmcif { - mux { - groups = "mmc0_data8_0", "mmc0_ctrl_0"; - function = "mmc0"; - }; - cfg { - groups = "mmc0_data8_0"; - pins = "PORT279"; - bias-pull-up; - }; - }; - - scifa4_pins: scifa4 { - groups = "scifa4_data", "scifa4_ctrl"; - function = "scifa4"; - }; - }; - -Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device - - &mmcif { - pinctrl-0 = <&mmcif_pins>; - pinctrl-names = "default"; - - bus-width = <8>; - vmmc-supply = <®_1p8v>; - }; |