diff options
Diffstat (limited to 'dts/Bindings/pinctrl/renesas,rza1-ports.yaml')
| -rw-r--r-- | dts/Bindings/pinctrl/renesas,rza1-ports.yaml | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/dts/Bindings/pinctrl/renesas,rza1-ports.yaml b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml new file mode 100644 index 0000000000..7f80578dc2 --- /dev/null +++ b/dts/Bindings/pinctrl/renesas,rza1-ports.yaml @@ -0,0 +1,190 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A1 combined Pin and GPIO controller + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO + controller, named "Ports" in the hardware reference manual. + Pin multiplexing and GPIO configuration is performed on a per-pin basis + writing configuration values to per-port register sets. + Each "port" features up to 16 pins, each of them configurable for GPIO + function (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + oneOf: + - const: renesas,r7s72100-ports # RZ/A1H + - items: + - const: renesas,r7s72101-ports # RZ/A1M + - const: renesas,r7s72100-ports # fallback + - const: renesas,r7s72102-ports # RZ/A1L + + reg: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^gpio-[0-9]*$": + type: object + + description: + Each port of the r7s72100 pin controller hardware is itself a GPIO + controller. + Different SoCs have different numbers of available pins per port, but + generally speaking, each of them can be configured in GPIO ("port") mode + on this hardware. + Describe GPIO controllers using sub-nodes with the following properties. + + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - gpio-ranges + + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + A pin multiplexing sub-node describes how to configure a set of (or a + single) pin in some desired alternate function mode. + A single sub-node may define several pin configurations. + A few alternate function require special pin configuration flags to be + supplied along with the alternate function configuration number. + The hardware reference manual specifies when a pin function requires + "software IO driven" mode to be specified. To do so use the generic + properties from the <include/linux/pinctrl/pinconf_generic.h> header + file to instruct the pin controller to perform the desired pin + configuration operation. + The hardware reference manual specifies when a pin has to be configured + to work in bi-directional mode and when the IO direction has to be + specified by software. Bi-directional pins must be managed by the pin + controller driver internally, while software driven IO direction has to + be explicitly selected when multiple options are available. + + properties: + pinmux: + description: | + Integer array representing pin number and pin multiplexing + configuration. + When a pin has to be configured in alternate function mode, use + this property to identify the pin by its global index, and provide + its alternate function configuration number along with it. + When multiple pins are required to be configured as part of the + same alternate function they shall be specified as members of the + same argument list of a single "pinmux" property. + Helper macros to ease assembling the pin index from its position + (port where it sits on and pin number) and alternate function + identifier are provided by the pin controller header file at: + <include/dt-bindings/pinctrl/r7s72100-pinctrl.h> + Integers values in "pinmux" argument list are assembled as: + ((PORT * 16 + PIN) | MUX_FUNC << 16) + + phandle: true + input-enable: true + output-enable: true + + required: + - pinmux + + additionalProperties: false + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +examples: + - | + #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + pinctrl: pinctrl@fcfe3000 { + compatible = "renesas,r7s72100-ports"; + + reg = <0xfcfe3000 0x4230>; + + /* + * A GPIO controller node, controlling 16 pins indexed from 0. + * The GPIO controller base in the global pin indexing space is pin + * 48, thus pins [0 - 15] on this controller map to pins [48 - 63] + * in the global pin indexing space. + */ + port3: gpio-3 { + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + /* + * A serial communication interface with a TX output pin and an RX + * input pin. + * Pin #0 on port #3 is configured as alternate function #6. + * Pin #2 on port #3 is configured as alternate function #4. + */ + scif2_pins: serial2 { + pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; + }; + + + /* + * I2c master: both SDA and SCL pins need bi-directional operations + * Pin #4 on port #1 is configured as alternate function #1. + * Pin #5 on port #1 is configured as alternate function #1. + * Both need to work in bi-directional mode, the driver must manage + * this internally. + */ + i2c2_pins: i2c2 { + pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>; + }; + + + /* + * Multi-function timer input and output compare pins. + */ + tioc0_pins: tioc0 { + /* + * Configure TIOC0A as software driven input + * Pin #0 on port #4 is configured as alternate function #2 + * with IO direction specified by software as input. + */ + tioc0_input_pins { + pinmux = <RZA1_PINMUX(4, 0, 2)>; + input-enable; + }; + + /* + * Configure TIOC0B as software driven output + * Pin #1 on port #4 is configured as alternate function #1 + * with IO direction specified by software as output. + */ + tioc0_output_pins { + pinmux = <RZA1_PINMUX(4, 1, 1)>; + output-enable; + }; + }; + }; |