diff options
Diffstat (limited to 'dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt')
| -rw-r--r-- | dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt b/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt deleted file mode 100644 index 25e53acd52..0000000000 --- a/dts/Bindings/pinctrl/renesas,rzn1-pinctrl.txt +++ /dev/null @@ -1,153 +0,0 @@ -Renesas RZ/N1 SoC Pinctrl node description. - -Pin controller node -------------------- -Required properties: -- compatible: SoC-specific compatible string "renesas,<soc-specific>-pinctrl" - followed by "renesas,rzn1-pinctrl" as fallback. The SoC-specific compatible - strings must be one of: - "renesas,r9a06g032-pinctrl" for RZ/N1D - "renesas,r9a06g033-pinctrl" for RZ/N1S -- reg: Address base and length of the memory area where the pin controller - hardware is mapped to. -- clocks: phandle for the clock, see the description of clock-names below. -- clock-names: Contains the name of the clock: - "bus", the bus clock, sometimes described as pclk, for register accesses. - -Example: - pinctrl: pin-controller@40067000 { - compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; - reg = <0x40067000 0x1000>, <0x51000000 0x480>; - clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; - clock-names = "bus"; - }; - -Sub-nodes ---------- - -The child nodes of the pin controller node describe a pin multiplexing -function. - -- Pin multiplexing sub-nodes: - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - A single sub-node may define several pin configurations. - Please refer to pinctrl-bindings.txt to get to know more on generic - pin properties usage. - - The allowed generic formats for a pin multiplexing sub-node are the - following ones: - - node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - node-2 { - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - sub-node-2 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - node-3 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - - sub-node-1 { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - - ... - - sub-node-n { - pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ... ; - GENERIC_PINCONFIG; - }; - }; - - Use the latter two formats when pins part of the same logical group need to - have different generic pin configuration flags applied. Note that the generic - pinconfig in node-3 does not apply to the sub-nodes. - - Client sub-nodes shall refer to pin multiplexing sub-nodes using the phandle - of the most external one. - - Eg. - - client-1 { - ... - pinctrl-0 = <&node-1>; - ... - }; - - client-2 { - ... - pinctrl-0 = <&node-2>; - ... - }; - - Required properties: - - pinmux: - integer array representing pin number and pin multiplexing configuration. - When a pin has to be configured in alternate function mode, use this - property to identify the pin by its global index, and provide its - alternate function configuration number along with it. - When multiple pins are required to be configured as part of the same - alternate function they shall be specified as members of the same - argument list of a single "pinmux" property. - Integers values in the "pinmux" argument list are assembled as: - (PIN | MUX_FUNC << 8) - where PIN directly corresponds to the pl_gpio pin number and MUX_FUNC is - one of the alternate function identifiers defined in: - <include/dt-bindings/pinctrl/rzn1-pinctrl.h> - These identifiers collapse the IO Multiplex Configuration Level 1 and - Level 2 numbers that are detailed in the hardware reference manual into a - single number. The identifiers for Level 2 are simply offset by 10. - Additional identifiers are provided to specify the MDIO source peripheral. - - Optional generic pinconf properties: - - bias-disable - disable any pin bias - - bias-pull-up - pull up the pin with 50 KOhm - - bias-pull-down - pull down the pin with 50 KOhm - - bias-high-impedance - high impedance mode - - drive-strength - sink or source at most 4, 6, 8 or 12 mA - - Example: - A serial communication interface with a TX output pin and an RX input pin. - - &pinctrl { - pins_uart0: pins_uart0 { - pinmux = < - RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */ - RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */ - >; - }; - }; - - Example 2: - Here we set the pull up on the RXD pin of the UART. - - &pinctrl { - pins_uart0: pins_uart0 { - pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>; /* TXD */ - - pins_uart6_rx { - pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>; /* RXD */ - bias-pull-up; - }; - }; - }; |