1 files changed, 190 insertions, 0 deletions
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.yaml b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
new file mode 100644
index 0000000000..20e806dce1
--- /dev/null
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Pinmux Controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip Pinmux Controller enables the IC to share one PAD
+  to several functional blocks. The sharing is done by multiplexing
+  the PAD input/output signals. For each PAD there are several muxing
+  options with option 0 being used as a GPIO.
+
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  The Rockchip pin configuration node is a node of a group of pins which can be
+  used for a specific device or function. This node represents both mux and
+  config of the pins in that group. The 'pins' selects the function mode
+  (also named pin mode) this pin can work on and the 'config' configures
+  various pad settings such as pull-up, etc.
+
+  The pins are grouped into up to 9 individual pin banks which need to be
+  defined as gpio sub-nodes of the pinmux controller.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-pinctrl
+      - rockchip,rk2928-pinctrl
+      - rockchip,rk3036-pinctrl
+      - rockchip,rk3066a-pinctrl
+      - rockchip,rk3066b-pinctrl
+      - rockchip,rk3128-pinctrl
+      - rockchip,rk3188-pinctrl
+      - rockchip,rk3228-pinctrl
+      - rockchip,rk3288-pinctrl
+      - rockchip,rk3308-pinctrl
+      - rockchip,rk3328-pinctrl
+      - rockchip,rk3368-pinctrl
+      - rockchip,rk3399-pinctrl
+      - rockchip,rk3568-pinctrl
+      - rockchip,rk3588-pinctrl
+      - rockchip,rv1108-pinctrl
+      - rockchip,rv1126-pinctrl
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF registers.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the PMU registers,
+      as some SoCs carry parts of the iomux controller registers there.
+      Required for at least rk3188 and rk3288. On the rk3368 this should
+      point to the PMUGRF syscon.
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - rockchip,grf
+
+patternProperties:
+  "gpio@[0-9a-f]+$":
+    type: object
+
+    $ref: /schemas/gpio/rockchip,gpio-bank.yaml#
+    deprecated: true
+
+    unevaluatedProperties: false
+
+  "pcfg-[a-z0-9-]+$":
+    type: object
+    properties:
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-pin-default: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        minimum: 0
+        maximum: 20
+
+      input-enable: true
+
+      input-schmitt-enable: true
+
+      output-high: true
+
+      output-low: true
+
+    additionalProperties: false
+
+additionalProperties:
+  type: object
+  additionalProperties:
+    type: object
+    additionalProperties: false
+
+    properties:
+      rockchip,pins:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        items:
+          items:
+            - minimum: 0
+              maximum: 8
+              description:
+                Pin bank.
+            - minimum: 0
+              maximum: 31
+              description:
+                Pin bank index.
+            - minimum: 0
+              maximum: 13
+              description:
+                Mux 0 means GPIO and mux 1 to N means
+                the specific device function.
+            - description:
+                The phandle of a node contains the generic pinconfig options
+                to use as described in pinctrl-bindings.txt.
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    pinctrl: pinctrl {
+      compatible = "rockchip,rk3066a-pinctrl";
+      rockchip,grf = <&grf>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@20034000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x20034000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      pcfg_pull_default: pcfg-pull-default {
+        bias-pull-pin-default;
+      };
+
+      uart2 {
+        uart2_xfer: uart2-xfer {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+                          <1 RK_PB1 1 &pcfg_pull_default>;
+        };
+      };
+    };
+
+    uart2: serial@20064000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x20064000 0x400>;
+      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&mux_uart2>;
+      pinctrl-0 = <&uart2_xfer>;
+      pinctrl-names = "default";
+      reg-io-width = <1>;
+      reg-shift = <2>;
+    };