diff options
Diffstat (limited to 'dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml')
| -rw-r--r-- | dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml index 9296360442..f3258f2fd3 100644 --- a/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml +++ b/dts/Bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: StarFive JH7100 Pin Controller Device Tree Bindings +title: StarFive JH7100 Pin Controller description: | Bindings for the JH7100 RISC-V SoC from StarFive Ltd. @@ -111,7 +111,7 @@ patternProperties: pins it needs, and how they should be configured, with regard to muxer configuration, bias, input enable/disable, input schmitt trigger enable/disable, slew-rate and drive strength. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: /schemas/pinctrl/pincfg-node.yaml properties: pins: @@ -120,14 +120,14 @@ patternProperties: This should be set using either the PAD_GPIO or PAD_FUNC_SHARE macros. Either this or "pinmux" has to be specified, but not both. - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins" + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins pinmux: description: | The list of GPIOs and their mux settings that properties in the node apply to. This should be set using the GPIOMUX macro. Either this or "pins" has to be specified, but not both. - $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux" + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux bias-disable: true @@ -165,7 +165,7 @@ examples: - | #include <dt-bindings/clock/starfive-jh7100.h> #include <dt-bindings/reset/starfive-jh7100.h> - #include <dt-bindings/pinctrl/pinctrl-starfive.h> + #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h> soc { #address-cells = <2>; @@ -293,7 +293,7 @@ examples: pinctrl-names = "default"; }; - i2c0 { + i2c { pinctrl-0 = <&i2c0_pins_default>; pinctrl-names = "default"; }; |