diff options
Diffstat (limited to 'dts/Bindings/pinctrl')
| -rw-r--r-- | dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt | 12 | ||||
| -rw-r--r-- | dts/Bindings/pinctrl/qcom,pmic-gpio.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt | 4 |
4 files changed, 13 insertions, 7 deletions
diff --git a/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt b/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt index 4b5efa51be..29b72e303e 100644 --- a/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt +++ b/dts/Bindings/pinctrl/microchip,pic32-pinctrl.txt @@ -34,7 +34,7 @@ pic32_pinctrl: pinctrl@1f801400{ #size-cells = <1>; compatible = "microchip,pic32mzda-pinctrl"; reg = <0x1f801400 0x400>; - clocks = <&PBCLK1>; + clocks = <&rootclk PB1CLK>; pinctrl_uart2: pinctrl_uart2 { uart2-tx { diff --git a/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 30676ded85..4048f43a9d 100644 --- a/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/dts/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -1,6 +1,12 @@ Device tree binding for NVIDIA Tegra XUSB pad controller ======================================================== +NOTE: It turns out that this binding isn't an accurate description of the XUSB +pad controller. While the description is good enough for the functional subset +required for PCIe and SATA, it lacks the flexibility to represent the features +needed for USB. For the new binding, see ../phy/nvidia,tegra-xusb-padctl.txt. +The binding described in this file is deprecated and should not be used. + The Tegra XUSB pad controller manages a set of lanes, each of which can be assigned to one out of a set of different pads. Some of these pads have an associated PHY that must be powered up before the pad can be used. @@ -79,7 +85,7 @@ Example: SoC file extract: ----------------- - padctl@0,7009f000 { + padctl@7009f000 { compatible = "nvidia,tegra124-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; resets = <&tegra_car 142>; @@ -91,7 +97,7 @@ SoC file extract: Board file extract: ------------------- - pcie-controller@0,01003000 { + pcie-controller@01003000 { ... phys = <&padctl 0>; @@ -102,7 +108,7 @@ Board file extract: ... - padctl: padctl@0,7009f000 { + padctl: padctl@7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt index a90c812ad6..a54c39ebbf 100644 --- a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt +++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt @@ -122,7 +122,7 @@ to specify in a pin configuration subnode: 2: 1.5uA (PMIC_GPIO_PULL_UP_1P5) 3: 31.5uA (PMIC_GPIO_PULL_UP_31P5) 4: 1.5uA + 30uA boost (PMIC_GPIO_PULL_UP_1P5_30) - If this property is ommited 30uA strength will be used if + If this property is omitted 30uA strength will be used if pull up is selected - bias-high-impedance: diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt index ffadb7a371..74e6ec0339 100644 --- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -72,8 +72,8 @@ Pin Configuration Node Properties: The pin configuration parameters use the generic pinconf bindings defined in pinctrl-bindings.txt in this directory. The supported parameters are -bias-disable, bias-pull-up, bias-pull-down and power-source. For pins that -have a configurable I/O voltage, the power-source value should be the +bias-disable, bias-pull-up, bias-pull-down, drive strength and power-source. For +pins that have a configurable I/O voltage, the power-source value should be the nominal I/O voltage in millivolts. |