summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/pinctrl
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/pinctrl')
-rw-r--r--dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt38
-rw-r--r--dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt90
-rw-r--r--dts/Bindings/pinctrl/berlin,pinctrl.txt5
-rw-r--r--dts/Bindings/pinctrl/brcm,cygnus-gpio.txt16
-rw-r--r--dts/Bindings/pinctrl/cnxt,cx92755-pinctrl.txt86
-rw-r--r--dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt36
-rw-r--r--dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt63
-rw-r--r--dts/Bindings/pinctrl/qcom,pmic-mpp.txt36
-rw-r--r--dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt25
-rw-r--r--dts/Bindings/pinctrl/ste,nomadik.txt7
10 files changed, 369 insertions, 33 deletions
diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 9462ab7ddd..b321b26780 100644
--- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -17,6 +17,7 @@ Required properties:
"allwinner,sun8i-a23-pinctrl"
"allwinner,sun8i-a23-r-pinctrl"
"allwinner,sun8i-a33-pinctrl"
+ "allwinner,sun8i-a83t-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
@@ -48,7 +49,7 @@ Optional subnode-properties:
Examples:
-pinctrl@01c20800 {
+pio: pinctrl@01c20800 {
compatible = "allwinner,sun5i-a13-pinctrl";
reg = <0x01c20800 0x400>;
#address-cells = <1>;
@@ -68,3 +69,38 @@ pinctrl@01c20800 {
allwinner,pull = <0>;
};
};
+
+
+GPIO and interrupt controller
+-----------------------------
+
+This hardware also acts as a GPIO controller and an interrupt
+controller.
+
+Consumers that would want to refer to one or the other (or both)
+should provide through the usual *-gpios and interrupts properties a
+cell with 3 arguments, first the number of the bank, then the pin
+inside that bank, and finally the flags for the GPIO/interrupts.
+
+Example:
+
+xio: gpio@38 {
+ compatible = "nxp,pcf8574a";
+ reg = <0x38>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&pio>;
+ interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+
+reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+};
diff --git a/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
new file mode 100644
index 0000000000..61ac75706c
--- /dev/null
+++ b/dts/Bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -0,0 +1,90 @@
+* Atmel PIO4 Controller
+
+The Atmel PIO4 controller is used to select the function of a pin and to
+configure it.
+
+Required properties:
+- compatible: "atmel,sama5d2-pinctrl".
+- reg: base address and length of the PIO controller.
+- interrupts: interrupt outputs from the controller, one for each bank.
+- interrupt-controller: mark the device node as an interrupt controller.
+- #interrupt-cells: should be two.
+- gpio-controller: mark the device node as a gpio controller.
+- #gpio-cells: should be two.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+Each node (or subnode) will list the pins it needs and how to configured these
+pins.
+
+ node {
+ pinmux = <PIN_NUMBER_PINMUX>;
+ GENERIC_PINCONFIG;
+ };
+
+Required properties:
+- pinmux: integer array. Each integer represents a pin number plus mux and
+ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
+right representation of the pin.
+
+Optional properties:
+- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable,
+bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable,
+input-debounce, output-low, output-high.
+
+Example:
+
+#include <sama5d2-pinfunc.h>
+
+...
+{
+ pioA: pinctrl@fc038000 {
+ compatible = "atmel,sama5d2-pinctrl";
+ reg = <0xfc038000 0x600>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+ <68 IRQ_TYPE_LEVEL_HIGH 7>,
+ <69 IRQ_TYPE_LEVEL_HIGH 7>,
+ <70 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&pioA_clk>;
+
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PB0>,
+ <PIN_PB5>;
+ bias-pull-up;
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+ ...
+ };
+};
+...
diff --git a/dts/Bindings/pinctrl/berlin,pinctrl.txt b/dts/Bindings/pinctrl/berlin,pinctrl.txt
index a8bb5e2601..f8fa28ce16 100644
--- a/dts/Bindings/pinctrl/berlin,pinctrl.txt
+++ b/dts/Bindings/pinctrl/berlin,pinctrl.txt
@@ -20,7 +20,10 @@ Required properties:
"marvell,berlin2cd-soc-pinctrl",
"marvell,berlin2cd-system-pinctrl",
"marvell,berlin2q-soc-pinctrl",
- "marvell,berlin2q-system-pinctrl"
+ "marvell,berlin2q-system-pinctrl",
+ "marvell,berlin4ct-avio-pinctrl",
+ "marvell,berlin4ct-soc-pinctrl",
+ "marvell,berlin4ct-system-pinctrl"
Required subnode-properties:
- groups: a list of strings describing the group names.
diff --git a/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt b/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
index 6540ca56be..16589fb6f4 100644
--- a/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
+++ b/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
@@ -3,8 +3,8 @@ Broadcom Cygnus GPIO/PINCONF Controller
Required properties:
- compatible:
- Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", or
- "brcm,cygnus-crmu-gpio"
+ Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio",
+ "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
- reg:
Define the base and range of the I/O address space that contains the Cygnus
@@ -26,9 +26,13 @@ Optional properties:
- interrupt-controller:
Specifies that the node is an interrupt controller
-- pinmux:
- Specifies the phandle to the IOMUX device, where pins can be individually
-muxed to GPIO
+- gpio-ranges:
+ Specifies the mapping between gpio controller and pin-controllers pins.
+ This requires 4 fields in cells defined as -
+ 1. Phandle of pin-controller.
+ 2. GPIO base pin offset.
+ 3 Pin-control base pin offset.
+ 4. number of gpio pins which are linearly mapped from pin base.
Supported generic PINCONF properties in child nodes:
@@ -78,6 +82,8 @@ Example:
gpio-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
+ gpio-ranges = <&pinctrl 0 42 1>,
+ <&pinctrl 1 44 3>;
};
/*
diff --git a/dts/Bindings/pinctrl/cnxt,cx92755-pinctrl.txt b/dts/Bindings/pinctrl/cnxt,cx92755-pinctrl.txt
new file mode 100644
index 0000000000..23ce8dc269
--- /dev/null
+++ b/dts/Bindings/pinctrl/cnxt,cx92755-pinctrl.txt
@@ -0,0 +1,86 @@
+Conexant Digicolor CX92755 General Purpose Pin Mapping
+
+This document describes the device tree binding of the pin mapping hardware
+modules in the Conexant Digicolor CX92755 SoCs. The CX92755 in one of the
+Digicolor series of SoCs.
+
+=== Pin Controller Node ===
+
+Required Properties:
+
+- compatible: Must be "cnxt,cx92755-pinctrl"
+- reg: Base address of the General Purpose Pin Mapping register block and the
+ size of the block.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Must be <2>. The first cell is the pin number and the
+ second cell is used to specify flags. See include/dt-bindings/gpio/gpio.h
+ for possible values.
+
+For example, the following is the bare minimum node:
+
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+As a pin controller device, in addition to the required properties, this node
+should also contain the pin configuration nodes that client devices reference,
+if any.
+
+For a general description of GPIO bindings, please refer to ../gpio/gpio.txt.
+
+=== Pin Configuration Node ===
+
+Each pin configuration node is a sub-node of the pin controller node and is a
+container of an arbitrary number of subnodes, called pin group nodes in this
+document.
+
+Please refer to the pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the definition of a
+"pin configuration node".
+
+=== Pin Group Node ===
+
+A pin group node specifies the desired pin mux for an arbitrary number of
+pins. The name of the pin group node is optional and not used.
+
+A pin group node only affects the properties specified in the node, and has no
+effect on any properties that are omitted.
+
+The pin group node accepts a subset of the generic pin config properties. For
+details generic pin config properties, please refer to pinctrl-bindings.txt
+and <include/linux/pinctrl/pinconfig-generic.h>.
+
+Required Pin Group Node Properties:
+
+- pins: Multiple strings. Specifies the name(s) of one or more pins to be
+ configured by this node. The format of a pin name string is "GP_xy", where x
+ is an uppercase character from 'A' to 'R', and y is a digit from 0 to 7.
+- function: String. Specifies the pin mux selection. Values must be one of:
+ "gpio", "client_a", "client_b", "client_c"
+
+Example:
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+
+ uart0_default: uart0_active {
+ data_signals {
+ pins = "GP_O0", "GP_O1";
+ function = "client_b";
+ };
+ };
+ };
+
+ uart0: uart@f0000740 {
+ compatible = "cnxt,cx92755-usart";
+ ...
+ pinctrl-0 = <&uart0_default>;
+ pinctrl-names = "default";
+ };
+
+In the example above, a single pin group configuration node defines the
+"client select" for the Rx and Tx signals of uart0. The uart0 node references
+that pin configuration node using the &uart0_default phandle.
diff --git a/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 0000000000..a81bbf37ed
--- /dev/null
+++ b/dts/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
diff --git a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt
index 8bbf25d586..457b2c68d4 100644
--- a/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ b/dts/Bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -1,16 +1,42 @@
* Freescale i.MX7 Dual IOMUX Controller
+iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar
+as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low
+power state retention capabilities on gpios that are part of iomuxc-lpsr
+(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for
+mux and pad control settings, it shares the input select register from main
+iomuxc controller for daisy chain settings, the fsl,input-sel property extends
+fsl,imx-pinctrl driver to support iomuxc-lpsr controller.
+
+iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+};
+
+iomuxc: iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+};
+
+Pheriparials using pads from iomuxc-lpsr support low state retention power
+state, under LPSR mode GPIO's state of pads are retain.
+
Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
and usage.
Required properties:
-- compatible: "fsl,imx7d-iomuxc"
+- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or
+ "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller.
- fsl,pins: each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is
the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual
Reference Manual for detailed CONFIG settings.
+- fsl,input-sel: required property for iomuxc-lpsr controller, this property is
+ a phandle for main iomuxc controller which shares the input select register for
+ daisy chain settings.
CONFIG bits definition:
PAD_CTL_PUS_100K_DOWN (0 << 5)
@@ -25,3 +51,38 @@ PAD_CTL_DSE_X1 (0 << 0)
PAD_CTL_DSE_X2 (1 << 0)
PAD_CTL_DSE_X3 (2 << 0)
PAD_CTL_DSE_X4 (3 << 0)
+
+Examples:
+While iomuxc-lpsr is intended to be used by dedicated peripherals to take
+advantages of LPSR power mode, is also possible that an IP to use pads from
+any of the iomux controllers. For example the I2C1 IP can use SCL pad from
+iomuxc-lpsr controller and SDA pad from iomuxc controller as:
+
+i2c1: i2c@30a20000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>;
+ status = "okay";
+};
+
+iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
+ >;
+ };
+};
+
+iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+
+ pinctrl_i2c1_2: i2c1grp-2 {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ >;
+ };
+};
diff --git a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt b/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
index ed19991aad..d7803a2a94 100644
--- a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
@@ -7,8 +7,13 @@ of PMIC's from Qualcomm.
Usage: required
Value type: <string>
Definition: Should contain one of:
+ "qcom,pm8018-mpp",
+ "qcom,pm8038-mpp",
+ "qcom,pm8821-mpp",
"qcom,pm8841-mpp",
"qcom,pm8916-mpp",
+ "qcom,pm8917-mpp",
+ "qcom,pm8921-mpp",
"qcom,pm8941-mpp",
"qcom,pma8084-mpp",
@@ -77,12 +82,9 @@ to specify in a pin configuration subnode:
Value type: <string>
Definition: Specify the alternative function to be configured for the
specified pins. Valid values are:
- "normal",
- "paired",
- "dtest1",
- "dtest2",
- "dtest3",
- "dtest4"
+ "digital",
+ "analog",
+ "sink"
- bias-disable:
Usage: optional
@@ -127,12 +129,18 @@ to specify in a pin configuration subnode:
Definition: Selects the power source for the specified pins. Valid power
sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-- qcom,analog-mode:
+- qcom,analog-level:
Usage: optional
- Value type: <none>
- Definition: Selects Analog mode of operation: combined with input-enable
- and/or output-high, output-low MPP could operate as
- Bidirectional Logic, Analog Input, Analog Output.
+ Value type: <u32>
+ Definition: Selects the source for analog output. Valued values are
+ defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
+ PMIC_MPP_AOUT_LVL_*
+
+- qcom,dtest:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects which dtest rail to be routed in the various functions.
+ Valid values are 1-4
- qcom,amux-route:
Usage: optional
@@ -140,6 +148,10 @@ to specify in a pin configuration subnode:
Definition: Selects the source for analog input. Valid values are
defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
+- qcom,paired:
+ Usage: optional
+ Value type: <none>
+ Definition: Indicates that the pin should be operating in paired mode.
Example:
@@ -156,7 +168,7 @@ Example:
pm8841_default: default {
gpio {
pins = "mpp1", "mpp2", "mpp3", "mpp4";
- function = "normal";
+ function = "digital";
input-enable;
power-source = <PM8841_MPP_S3>;
};
diff --git a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
index 51cee44fc1..ffadb7a371 100644
--- a/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/dts/Bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -19,6 +19,7 @@ Required Properties:
- "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
- "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
- "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
+ - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller.
- "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
- reg: Base address and length of each memory resource used by the pin
@@ -58,12 +59,12 @@ are parsed through phandles and processed purely based on their content.
Pin Configuration Node Properties:
-- renesas,pins : An array of strings, each string containing the name of a pin.
-- renesas,groups : An array of strings, each string containing the name of a pin
+- pins : An array of strings, each string containing the name of a pin.
+- groups : An array of strings, each string containing the name of a pin
group.
-- renesas,function: A string containing the name of the function to mux to the
- pin group(s) specified by the renesas,groups property
+- function: A string containing the name of the function to mux to the pin
+ group(s) specified by the groups property.
Valid values for pin, group and function names can be found in the group and
function arrays of the PFC data file corresponding to the SoC
@@ -71,7 +72,9 @@ Pin Configuration Node Properties:
The pin configuration parameters use the generic pinconf bindings defined in
pinctrl-bindings.txt in this directory. The supported parameters are
-bias-disable, bias-pull-up and bias-pull-down.
+bias-disable, bias-pull-up, bias-pull-down and power-source. For pins that
+have a configurable I/O voltage, the power-source value should be the
+nominal I/O voltage in millivolts.
GPIO
@@ -141,19 +144,19 @@ Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
mmcif_pins: mmcif {
mux {
- renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
- renesas,function = "mmc0";
+ groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ function = "mmc0";
};
cfg {
- renesas,groups = "mmc0_data8_0";
- renesas,pins = "PORT279";
+ groups = "mmc0_data8_0";
+ pins = "PORT279";
bias-pull-up;
};
};
scifa4_pins: scifa4 {
- renesas,groups = "scifa4_data", "scifa4_ctrl";
- renesas,function = "scifa4";
+ groups = "scifa4_data", "scifa4_ctrl";
+ function = "scifa4";
};
};
diff --git a/dts/Bindings/pinctrl/ste,nomadik.txt b/dts/Bindings/pinctrl/ste,nomadik.txt
index f63fcb3ed3..2213802435 100644
--- a/dts/Bindings/pinctrl/ste,nomadik.txt
+++ b/dts/Bindings/pinctrl/ste,nomadik.txt
@@ -3,7 +3,9 @@ ST Ericsson Nomadik pinmux controller
Required properties:
- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
"stericsson,stn8815-pinctrl"
-- reg: Should contain the register physical address and length of the PRCMU.
+- nomadik-gpio-chips: array of phandles to the corresponding GPIO chips
+ (these have the register ranges used by the pin controller).
+- prcm: phandle to the PRCMU managing the back end of this pin controller
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
@@ -74,7 +76,8 @@ Example board file extract:
pinctrl@80157000 {
compatible = "stericsson,db8500-pinctrl";
- reg = <0x80157000 0x2000>;
+ nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
+ prcm = <&prcmu>;
pinctrl-names = "default";
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 04:02:47 +0000