summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/power/power_domain.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/power/power_domain.txt')
-rw-r--r--dts/Bindings/power/power_domain.txt25
1 files changed, 17 insertions, 8 deletions
diff --git a/dts/Bindings/power/power_domain.txt b/dts/Bindings/power/power_domain.txt
index f335531..9b387f8 100644
--- a/dts/Bindings/power/power_domain.txt
+++ b/dts/Bindings/power/power_domain.txt
@@ -111,8 +111,8 @@ Example 3:
==PM domain consumers==
Required properties:
- - power-domains : A phandle and PM domain specifier as defined by bindings of
- the power controller specified by phandle.
+ - power-domains : A list of PM domain specifiers, as defined by bindings of
+ the power controller that is the PM domain provider.
Example:
@@ -122,12 +122,21 @@ Example:
power-domains = <&power 0>;
};
-The node above defines a typical PM domain consumer device, which is located
-inside a PM domain with index 0 of a power controller represented by a node
-with the label "power".
+ leaky-device@12351000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12351000 0x1000>;
+ power-domains = <&power 0>, <&power 1> ;
+ };
+
+The first example above defines a typical PM domain consumer device, which is
+located inside a PM domain with index 0 of a power controller represented by a
+node with the label "power".
+In the second example the consumer device are partitioned across two PM domains,
+the first with index 0 and the second with index 1, of a power controller that
+is represented by a node with the label "power.
Optional properties:
-- required-opp: This contains phandle to an OPP node in another device's OPP
+- required-opps: This contains phandle to an OPP node in another device's OPP
table. It may contain an array of phandles, where each phandle points to an
OPP of a different device. It should not contain multiple phandles to the OPP
nodes in the same OPP table. This specifies the minimum required OPP of the
@@ -175,14 +184,14 @@ Example:
compatible = "foo,i-leak-current";
reg = <0x12350000 0x1000>;
power-domains = <&power 0>;
- required-opp = <&domain0_opp_0>;
+ required-opps = <&domain0_opp_0>;
};
leaky-device1@12350000 {
compatible = "foo,i-leak-current";
reg = <0x12350000 0x1000>;
power-domains = <&power 1>;
- required-opp = <&domain1_opp_1>;
+ required-opps = <&domain1_opp_1>;
};
[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt