1 files changed, 72 insertions, 9 deletions
diff --git a/dts/Bindings/power/reset/qcom,pon.yaml b/dts/Bindings/power/reset/qcom,pon.yaml
index e7b436d2e7..fc8105a7b9 100644
--- a/dts/Bindings/power/reset/qcom,pon.yaml
+++ b/dts/Bindings/power/reset/qcom,pon.yaml
@@ -15,18 +15,28 @@ description: |
 
   This DT node has pwrkey and resin as sub nodes.
 
-allOf:
-  - $ref: reboot-mode.yaml#
-
 properties:
   compatible:
     enum:
       - qcom,pm8916-pon
+      - qcom,pm8941-pon
       - qcom,pms405-pon
       - qcom,pm8998-pon
+      - qcom,pmk8350-pon
 
   reg:
-    maxItems: 1
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMIC.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
 
   pwrkey:
     type: object
@@ -46,26 +56,79 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-pon
+              - qcom,pms405-pon
+              - qcom,pm8998-pon
+    then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+    # Special case for pm8941, which doesn't store reset mode
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmk8350-pon
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          items:
+            - const: hlos
+            - const: pbs
+
 examples:
   - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/input/linux-event-codes.h>
    #include <dt-bindings/spmi/spmi.h>
-   spmi_bus: spmi@c440000 {
+
+   spmi@c440000 {
      reg = <0x0c440000 0x1100>;
      #address-cells = <2>;
      #size-cells = <0>;
-     pmk8350: pmic@0 {
+
+     pmic@0 {
        reg = <0x0 SPMI_USID>;
        #address-cells = <1>;
        #size-cells = <0>;
-       pmk8350_pon: pon_hlos@1300 {
-         reg = <0x1300>;
+
+       pon@800 {
          compatible = "qcom,pm8998-pon";
+         reg = <0x800>;
 
          pwrkey {
             compatible = "qcom,pm8941-pwrkey";
-            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
             debounce = <15625>;
             bias-pull-up;
             linux,code = <KEY_POWER>;