diff options
Diffstat (limited to 'dts/Bindings/power/rockchip-io-domain.yaml')
| -rw-r--r-- | dts/Bindings/power/rockchip-io-domain.yaml | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/dts/Bindings/power/rockchip-io-domain.yaml b/dts/Bindings/power/rockchip-io-domain.yaml new file mode 100644 index 0000000000..1727bf1089 --- /dev/null +++ b/dts/Bindings/power/rockchip-io-domain.yaml @@ -0,0 +1,360 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SRAM for IO Voltage Domains + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: | + IO domain voltages on some Rockchip SoCs are variable but need to be + kept in sync between the regulators and the SoC using a special + register. + + A specific example using rk3288 + If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then + bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to + that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1. + + Said another way, this driver simply handles keeping bits in the SoCs + General Register File (GRF) in sync with the actual value of a voltage + hooked up to the pins. + + Note that this driver specifically does not include + any logic for deciding what voltage we should set regulators to + any logic for deciding whether regulators (or internal SoC blocks) + should have power or not have power + + If there were some other software that had the smarts of making + decisions about regulators, it would work in conjunction with this + driver. When that other software adjusted a regulators voltage then + this driver would handle telling the SoC about it. A good example is + vqmmc for SD. In that case the dw_mmc driver simply is told about a + regulator. It changes the regulator between 3.3V and 1.8V at the + right time. This driver notices the change and makes sure that the + SoC is on the same page. + + You specify supplies using the standard regulator bindings by including + a phandle the relevant regulator. All specified supplies must be able + to report their voltage. The IO Voltage Domain for any non-specified + supplies will be not be touched. + +properties: + compatible: + enum: + - rockchip,px30-io-voltage-domain + - rockchip,px30-pmu-io-voltage-domain + - rockchip,rk3188-io-voltage-domain + - rockchip,rk3228-io-voltage-domain + - rockchip,rk3288-io-voltage-domain + - rockchip,rk3328-io-voltage-domain + - rockchip,rk3368-io-voltage-domain + - rockchip,rk3368-pmu-io-voltage-domain + - rockchip,rk3399-io-voltage-domain + - rockchip,rk3399-pmu-io-voltage-domain + - rockchip,rk3568-pmu-io-voltage-domain + - rockchip,rv1108-io-voltage-domain + - rockchip,rv1108-pmu-io-voltage-domain + +required: + - compatible + +unevaluatedProperties: false + +allOf: + - $ref: "#/$defs/px30" + - $ref: "#/$defs/px30-pmu" + - $ref: "#/$defs/rk3188" + - $ref: "#/$defs/rk3228" + - $ref: "#/$defs/rk3288" + - $ref: "#/$defs/rk3328" + - $ref: "#/$defs/rk3368" + - $ref: "#/$defs/rk3368-pmu" + - $ref: "#/$defs/rk3399" + - $ref: "#/$defs/rk3399-pmu" + - $ref: "#/$defs/rk3568-pmu" + - $ref: "#/$defs/rv1108" + - $ref: "#/$defs/rv1108-pmu" + +$defs: + px30: + if: + properties: + compatible: + contains: + const: rockchip,px30-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio-oscgpi-supply: + description: The supply connected to VCCIO_OSCGPI. + + px30-pmu: + if: + properties: + compatible: + contains: + const: rockchip,px30-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + + rk3188: + if: + properties: + compatible: + contains: + const: rockchip,rk3188-io-voltage-domain + + then: + properties: + ap0-supply: + description: The supply connected to AP0_VCC. + ap1-supply: + description: The supply connected to AP1_VCC. + cif-supply: + description: The supply connected to CIF_VCC. + flash-supply: + description: The supply connected to FLASH_VCC. + lcdc0-supply: + description: The supply connected to LCD0_VCC. + lcdc1-supply: + description: The supply connected to LCD1_VCC. + vccio0-supply: + description: The supply connected to VCCIO0. + vccio1-supply: + description: The supply connected to VCCIO1. Also labeled as VCCIO2. + + rk3228: + if: + properties: + compatible: + contains: + const: rockchip,rk3228-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + + rk3288: + if: + properties: + compatible: + contains: + const: rockchip,rk3288-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO4_VDD. + bb-supply: + description: The supply connected to APIO5_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + flash1-supply: + description: The supply connected to FLASH1_VDD. Also known as SDIO1. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO2_VDD. + lcdc-supply: + description: The supply connected to LCDC_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO3_VDD. Also known as SDIO0. + + rk3328: + if: + properties: + compatible: + contains: + const: rockchip,rk3328-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + pmuio-supply: + description: The supply connected to VCCIO_PMU. + + rk3368: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO3_VDD. + dvp-supply: + description: The supply connected to DVPIO_VDD. + flash0-supply: + description: The supply connected to FLASH0_VDD. Typically for eMMC. + gpio30-supply: + description: The supply connected to APIO1_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdcard-supply: + description: The supply connected to SDMMC0_VDD. + wifi-supply: + description: The supply connected to APIO2_VDD. Also known as SDIO0. + + rk3368-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3368-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + vop-supply: + description: The supply connected to LCDC_VDD. + + rk3399: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-io-voltage-domain + + then: + properties: + audio-supply: + description: The supply connected to APIO5_VDD. + bt656-supply: + description: The supply connected to APIO2_VDD. + gpio1830-supply: + description: The supply connected to APIO4_VDD. + sdmmc-supply: + description: The supply connected to SDMMC0_VDD. + + rk3399-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3399-pmu-io-voltage-domain + + then: + properties: + pmu1830-supply: + description: The supply connected to PMUIO2_VDD. + + rk3568-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rk3568-pmu-io-voltage-domain + + then: + properties: + pmuio1-supply: + description: The supply connected to PMUIO1. + pmuio2-supply: + description: The supply connected to PMUIO2. + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio7-supply: + description: The supply connected to VCCIO7. + + rv1108: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to APIO1_VDD. + vccio2-supply: + description: The supply connected to APIO2_VDD. + vccio3-supply: + description: The supply connected to APIO3_VDD. + vccio5-supply: + description: The supply connected to APIO5_VDD. + vccio6-supply: + description: The supply connected to APIO6_VDD. + + rv1108-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rv1108-pmu-io-voltage-domain + + then: + properties: + pmu-supply: + description: The supply connected to PMUIO_VDD. + +examples: + - | + io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + audio-supply = <&vcc18_codec>; + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_pmuio>; + lcdc-supply = <&vcc33_lcd>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc18_wl>; + }; |