1 files changed, 0 insertions, 76 deletions
diff --git a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt b/dts/Bindings/pwm/nvidia,tegra20-pwm.txt
deleted file mode 100644
index 0a69eadf44..0000000000
--- a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-Tegra SoC PWFM controller
-
-Required properties:
-- compatible: Must be:
-  - "nvidia,tegra20-pwm": for Tegra20
-  - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30
-  - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114
-  - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124
-  - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132
-  - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210
-  - "nvidia,tegra186-pwm": for Tegra186
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
-  the cells format.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - pwm
-
-Optional properties:
-============================
-In some of the interface like PWM based regulator device, it is required
-to configure the pins differently in different states, especially in suspend
-state of the system. The configuration of pin is provided via the pinctrl
-DT node as detailed in the pinctrl DT binding document
-	Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-The PWM node will have following optional properties.
-pinctrl-names:	Pin state names. Must be "default" and "sleep".
-pinctrl-0:	phandle for the default/active state of pin configurations.
-pinctrl-1:	phandle for the sleep state of pin configurations.
-
-Example:
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car 17>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-	};
-
-
-Example with the pin configuration for suspend and resume:
-=========================================================
-Suppose pin PE7 (On Tegra210) interfaced with the regulator device and
-it requires PWM output to be tristated when system enters suspend.
-Following will be DT binding to achieve this:
-
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-
-	pinmux@700008d4 {
-		pwm_active_state: pwm_active_state {
-                        pe7 {
-                                nvidia,pins = "pe7";
-                                nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		pwm_sleep_state: pwm_sleep_state {
-                        pe7 {
-                                nvidia,pins = "pe7";
-                                nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	pwm@7000a000 {
-		/* Mandatory PWM properties */
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pwm_active_state>;
-		pinctrl-1 = <&pwm_sleep_state>;
-	};