diff options
Diffstat (limited to 'dts/Bindings/pwm')
| -rw-r--r-- | dts/Bindings/pwm/atmel,hlcdc-pwm.yaml | 35 | ||||
| -rw-r--r-- | dts/Bindings/pwm/atmel-hlcdc-pwm.txt | 29 | ||||
| -rw-r--r-- | dts/Bindings/pwm/marvell,pxa-pwm.yaml | 51 | ||||
| -rw-r--r-- | dts/Bindings/pwm/mediatek,mt2712-pwm.yaml | 1 | ||||
| -rw-r--r-- | dts/Bindings/pwm/mediatek,pwm-disp.yaml | 3 | ||||
| -rw-r--r-- | dts/Bindings/pwm/opencores,pwm.yaml | 56 | ||||
| -rw-r--r-- | dts/Bindings/pwm/pwm-amlogic.yaml | 115 | ||||
| -rw-r--r-- | dts/Bindings/pwm/pxa-pwm.txt | 30 |
8 files changed, 250 insertions, 70 deletions
diff --git a/dts/Bindings/pwm/atmel,hlcdc-pwm.yaml b/dts/Bindings/pwm/atmel,hlcdc-pwm.yaml new file mode 100644 index 0000000000..0e92868a2b --- /dev/null +++ b/dts/Bindings/pwm/atmel,hlcdc-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCDC's PWM controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block + generates the LCD contrast control signal (LCD_PWM) that controls the + display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be + converted to an analog voltage with a simple passive filter. LCD display + panels have different backlight specifications in terms of minimum/maximum + values for PWM frequency. If the LCDC PWM frequency range does not match the + LCD display panel, it is possible to use the standalone PWM Controller to + drive the backlight. + +properties: + compatible: + const: atmel,hlcdc-pwm + + "#pwm-cells": + const: 3 + +required: + - compatible + - "#pwm-cells" + +additionalProperties: false diff --git a/dts/Bindings/pwm/atmel-hlcdc-pwm.txt b/dts/Bindings/pwm/atmel-hlcdc-pwm.txt deleted file mode 100644 index afa501bf7f..0000000000 --- a/dts/Bindings/pwm/atmel-hlcdc-pwm.txt +++ /dev/null @@ -1,29 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver - -The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. -See ../mfd/atmel-hlcdc.txt for more details. - -Required properties: - - compatible: value should be one of the following: - "atmel,hlcdc-pwm" - - pinctr-names: the pin control state names. Should contain "default". - - pinctrl-0: should contain the pinctrl states described by pinctrl - default. - - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells - bindings defined in pwm.yaml in this directory. - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/dts/Bindings/pwm/marvell,pxa-pwm.yaml b/dts/Bindings/pwm/marvell,pxa-pwm.yaml new file mode 100644 index 0000000000..ba6325575e --- /dev/null +++ b/dts/Bindings/pwm/marvell,pxa-pwm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell PXA PWM + +maintainers: + - Duje Mihanović <duje.mihanovic@skole.hr> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + enum: + - marvell,pxa250-pwm + - marvell,pxa270-pwm + - marvell,pxa168-pwm + - marvell,pxa910-pwm + + reg: + # Length should be 0x10 + maxItems: 1 + + "#pwm-cells": + # Used for specifying the period length in nanoseconds + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/pxa-clock.h> + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + }; diff --git a/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml b/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml index 0fbe8a6469..a5c3088016 100644 --- a/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml +++ b/dts/Bindings/pwm/mediatek,mt2712-pwm.yaml @@ -24,6 +24,7 @@ properties: - mediatek,mt7629-pwm - mediatek,mt7981-pwm - mediatek,mt7986-pwm + - mediatek,mt7988-pwm - mediatek,mt8183-pwm - mediatek,mt8365-pwm - mediatek,mt8516-pwm diff --git a/dts/Bindings/pwm/mediatek,pwm-disp.yaml b/dts/Bindings/pwm/mediatek,pwm-disp.yaml index afcdeed4e8..bc813fe74f 100644 --- a/dts/Bindings/pwm/mediatek,pwm-disp.yaml +++ b/dts/Bindings/pwm/mediatek,pwm-disp.yaml @@ -52,6 +52,9 @@ properties: - const: main - const: mm + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/dts/Bindings/pwm/opencores,pwm.yaml b/dts/Bindings/pwm/opencores,pwm.yaml new file mode 100644 index 0000000000..52a59d245c --- /dev/null +++ b/dts/Bindings/pwm/opencores,pwm.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OpenCores PWM controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The OpenCores PTC ip core contains a PWM controller. When operating in PWM + mode, the PTC core generates binary signal with user-programmable low and + high periods. All PTC counters and registers are 32-bit. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - starfive,jh7100-pwm + - starfive,jh7110-pwm + - starfive,jh8100-pwm + - const: opencores,pwm-v1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@12490000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x12490000 0x10000>; + clocks = <&clkgen 181>; + resets = <&rstgen 109>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/pwm/pwm-amlogic.yaml b/dts/Bindings/pwm/pwm-amlogic.yaml index 527864a4d8..1d71d4f8f3 100644 --- a/dts/Bindings/pwm/pwm-amlogic.yaml +++ b/dts/Bindings/pwm/pwm-amlogic.yaml @@ -9,9 +9,6 @@ title: Amlogic PWM maintainers: - Heiner Kallweit <hkallweit1@gmail.com> -allOf: - - $ref: pwm.yaml# - properties: compatible: oneOf: @@ -24,31 +21,40 @@ properties: - amlogic,meson-g12a-ee-pwm - amlogic,meson-g12a-ao-pwm-ab - amlogic,meson-g12a-ao-pwm-cd - - amlogic,meson-s4-pwm + deprecated: true - items: - const: amlogic,meson-gx-pwm - const: amlogic,meson-gxbb-pwm + deprecated: true - items: - const: amlogic,meson-gx-ao-pwm - const: amlogic,meson-gxbb-ao-pwm + deprecated: true - items: - const: amlogic,meson8-pwm - const: amlogic,meson8b-pwm + deprecated: true + - enum: + - amlogic,meson8-pwm-v2 + - amlogic,meson-s4-pwm + - items: + - enum: + - amlogic,meson8b-pwm-v2 + - amlogic,meson-gxbb-pwm-v2 + - amlogic,meson-axg-pwm-v2 + - amlogic,meson-g12-pwm-v2 + - const: amlogic,meson8-pwm-v2 reg: maxItems: 1 clocks: minItems: 1 - maxItems: 2 + maxItems: 4 clock-names: - oneOf: - - items: - - enum: [clkin0, clkin1] - - items: - - const: clkin0 - - const: clkin1 + minItems: 1 + maxItems: 2 "#pwm-cells": const: 3 @@ -57,6 +63,79 @@ required: - compatible - reg +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-pwm + - amlogic,meson8b-pwm + - amlogic,meson-gxbb-pwm + - amlogic,meson-gxbb-ao-pwm + - amlogic,meson-axg-ee-pwm + - amlogic,meson-axg-ao-pwm + - amlogic,meson-g12a-ee-pwm + - amlogic,meson-g12a-ao-pwm-ab + - amlogic,meson-g12a-ao-pwm-cd + then: + # Obsolete historic bindings tied to the driver implementation + # The clocks provided here are meant to be matched with the input + # known (hard-coded) in the driver and used to select pwm clock + # source. Currently, the linux driver ignores this. + # This is kept to maintain ABI backward compatibility. + properties: + clocks: + maxItems: 2 + clock-names: + oneOf: + - items: + - enum: [clkin0, clkin1] + - items: + - const: clkin0 + - const: clkin1 + + # Newer binding where clock describe the actual clock inputs of the pwm + # block. These are necessary but some inputs may be grounded. + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson8-pwm-v2 + then: + properties: + clocks: + minItems: 1 + items: + - description: input clock 0 of the pwm block + - description: input clock 1 of the pwm block + - description: input clock 2 of the pwm block + - description: input clock 3 of the pwm block + clock-names: false + required: + - clocks + + # Newer IP block take a single input per channel, instead of 4 inputs + # for both channels + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-s4-pwm + then: + properties: + clocks: + items: + - description: input clock of PWM channel A + - description: input clock of PWM channel B + clock-names: false + required: + - clocks + additionalProperties: false examples: @@ -68,3 +147,17 @@ examples: clock-names = "clkin0", "clkin1"; #pwm-cells = <3>; }; + - | + pwm@2000 { + compatible = "amlogic,meson8-pwm-v2"; + reg = <0x1000 0x10>; + clocks = <&xtal>, <0>, <&fdiv4>, <&fdiv5>; + #pwm-cells = <3>; + }; + - | + pwm@1000 { + compatible = "amlogic,meson-s4-pwm"; + reg = <0x1000 0x10>; + clocks = <&pwm_src_a>, <&pwm_src_b>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/pwm/pxa-pwm.txt b/dts/Bindings/pwm/pxa-pwm.txt deleted file mode 100644 index 5ae9f1e3c3..0000000000 --- a/dts/Bindings/pwm/pxa-pwm.txt +++ /dev/null @@ -1,30 +0,0 @@ -Marvell PWM controller - -Required properties: -- compatible: should be one or more of: - - "marvell,pxa250-pwm" - - "marvell,pxa270-pwm" - - "marvell,pxa168-pwm" - - "marvell,pxa910-pwm" -- reg: Physical base address and length of the registers used by the PWM channel - Note that one device instance must be created for each PWM that is used, so the - length covers only the register window for one PWM output, not that of the - entire PWM controller. Currently length is 0x10 for all supported devices. -- #pwm-cells: Should be 1. This cell is used to specify the period in - nanoseconds. - -Example PWM device node: - -pwm0: pwm@40b00000 { - compatible = "marvell,pxa250-pwm"; - reg = <0x40b00000 0x10>; - #pwm-cells = <1>; -}; - -Example PWM client node: - -backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 5000000>; - ... -} |