diff options
Diffstat (limited to 'dts/Bindings/pwm')
| -rw-r--r-- | dts/Bindings/pwm/atmel-pwm.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/pwm/nvidia,tegra20-pwm.txt | 45 | ||||
| -rw-r--r-- | dts/Bindings/pwm/pwm-mediatek.txt | 34 |
3 files changed, 80 insertions, 0 deletions
diff --git a/dts/Bindings/pwm/atmel-pwm.txt b/dts/Bindings/pwm/atmel-pwm.txt index 02331b904d..c8c831d7b0 100644 --- a/dts/Bindings/pwm/atmel-pwm.txt +++ b/dts/Bindings/pwm/atmel-pwm.txt @@ -4,6 +4,7 @@ Required properties: - compatible: should be one of: - "atmel,at91sam9rl-pwm" - "atmel,sama5d3-pwm" + - "atmel,sama5d2-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt b/dts/Bindings/pwm/nvidia,tegra20-pwm.txt index b4e73778dd..c57e11b8d9 100644 --- a/dts/Bindings/pwm/nvidia,tegra20-pwm.txt +++ b/dts/Bindings/pwm/nvidia,tegra20-pwm.txt @@ -19,6 +19,19 @@ Required properties: - reset-names: Must include the following entries: - pwm +Optional properties: +============================ +In some of the interface like PWM based regulator device, it is required +to configure the pins differently in different states, especially in suspend +state of the system. The configuration of pin is provided via the pinctrl +DT node as detailed in the pinctrl DT binding document + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +The PWM node will have following optional properties. +pinctrl-names: Pin state names. Must be "default" and "sleep". +pinctrl-0: phandle for the default/active state of pin configurations. +pinctrl-1: phandle for the sleep state of pin configurations. + Example: pwm: pwm@7000a000 { @@ -29,3 +42,35 @@ Example: resets = <&tegra_car 17>; reset-names = "pwm"; }; + + +Example with the pin configuration for suspend and resume: +========================================================= +Suppose pin PE7 (On Tegra210) interfaced with the regulator device and +it requires PWM output to be tristated when system enters suspend. +Following will be DT binding to achieve this: + +#include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@700008d4 { + pwm_active_state: pwm_active_state { + pe7 { + nvidia,pins = "pe7"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + + pwm_sleep_state: pwm_sleep_state { + pe7 { + nvidia,pins = "pe7"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + pwm@7000a000 { + /* Mandatory PWM properties */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm_active_state>; + pinctrl-1 = <&pwm_sleep_state>; + }; diff --git a/dts/Bindings/pwm/pwm-mediatek.txt b/dts/Bindings/pwm/pwm-mediatek.txt new file mode 100644 index 0000000000..54c59b0560 --- /dev/null +++ b/dts/Bindings/pwm/pwm-mediatek.txt @@ -0,0 +1,34 @@ +MediaTek PWM controller + +Required properties: + - compatible: should be "mediatek,<name>-pwm": + - "mediatek,mt7623-pwm": found on mt7623 SoC. + - reg: physical base address and length of the controller's registers. + - #pwm-cells: must be 2. See pwm.txt in this directory for a description of + the cell format. + - clocks: phandle and clock specifier of the PWM reference clock. + - clock-names: must contain the following: + - "top": the top clock generator + - "main": clock used by the PWM core + - "pwm1-5": the five per PWM clocks + - pinctrl-names: Must contain a "default" entry. + - pinctrl-0: One property must exist for each entry in pinctrl-names. + See pinctrl/pinctrl-bindings.txt for details of the property values. + +Example: + pwm0: pwm@11006000 { + compatible = "mediatek,mt7623-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>; + clock-names = "top", "main", "pwm1", "pwm2", + "pwm3", "pwm4", "pwm5"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + }; |