summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/regulator/max77686.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/regulator/max77686.txt')
-rw-r--r--dts/Bindings/regulator/max77686.txt71
1 files changed, 71 insertions, 0 deletions
diff --git a/dts/Bindings/regulator/max77686.txt b/dts/Bindings/regulator/max77686.txt
new file mode 100644
index 0000000000..0dded64d89
--- /dev/null
+++ b/dts/Bindings/regulator/max77686.txt
@@ -0,0 +1,71 @@
+Binding for Maxim MAX77686 regulators
+
+This is a part of the device tree bindings of MAX77686 multi-function device.
+More information can be found in ../mfd/max77686.txt file.
+
+The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+ under subnode named "voltage-regulators" using the following format.
+
+ regulator_name {
+ regulator-compatible = LDOn/BUCKn
+ standard regulator constraints....
+ };
+ refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ The regulator node's name should be initialized with a string
+to get matched with their hardware counterparts as follow:
+
+ -LDOn : for LDOs, where n can lie in range 1 to 26.
+ example: LDO1, LDO2, LDO26.
+ -BUCKn : for BUCKs, where n can lie in range 1 to 9.
+ example: BUCK1, BUCK5, BUCK9.
+
+ Regulators which can be turned off during system suspend:
+ -LDOn : 2, 6-8, 10-12, 14-16,
+ -BUCKn : 1-4.
+ Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+ LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+ control. To turn this feature on this property must be added to the regulator
+ sub-node:
+ - maxim,ena-gpios : one GPIO specifier enable control (the gpio
+ flags are actually ignored and always
+ ACTIVE_HIGH is used)
+
+Example:
+
+ max77686: pmic@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 IRQ_TYPE_NONE>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+ };
+ };