1 files changed, 0 insertions, 111 deletions
diff --git a/dts/Bindings/regulator/max77802.txt b/dts/Bindings/regulator/max77802.txt
deleted file mode 100644
index b82943d836..0000000000
--- a/dts/Bindings/regulator/max77802.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Binding for Maxim MAX77802 regulators
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional properties:
-- inb1-supply:  The input supply for BUCK1
-- inb2-supply:  The input supply for BUCK2
-- inb3-supply:  The input supply for BUCK3
-- inb4-supply:  The input supply for BUCK4
-- inb5-supply:  The input supply for BUCK5
-- inb6-supply:  The input supply for BUCK6
-- inb7-supply:  The input supply for BUCK7
-- inb8-supply:  The input supply for BUCK8
-- inb9-supply:  The input supply for BUCK9
-- inb10-supply: The input supply for BUCK10
-- inl1-supply:  The input supply for LDO8 and LDO15
-- inl2-supply:  The input supply for LDO17, LDO27, LDO30 and LDO35
-- inl3-supply:  The input supply for LDO3, LDO5, LDO6 and LDO7
-- inl4-supply:  The input supply for LDO10, LDO11, LDO13 and LDO14
-- inl5-supply:  The input supply for LDO9 and LDO19
-- inl6-supply:  The input supply for LDO4, LDO21, LDO24 and LDO33
-- inl7-supply:  The input supply for LDO18, LDO20, LDO28 and LDO29
-- inl9-supply:  The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
-- inl10-supply: The input supply for LDO1 and LDO2
-
-Optional nodes:
-- regulators : The regulators of max77802 have to be instantiated
-  under subnode named "regulators" using the following format.
-
-	regulator-name {
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-The regulator node name should be initialized with a string to get matched
-with their hardware counterparts as follow. The valid names are:
-
-	-LDOn 	:	for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
-			and 32-35.
-			example: LDO1, LDO2, LDO35.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 10.
-			example: BUCK1, BUCK5, BUCK10.
-
-The max77802 regulator supports two different operating modes: Normal and Low
-Power Mode. Some regulators support the modes to be changed at startup or by
-the consumers during normal operation while others only support to change the
-mode during system suspend. The standard regulator suspend states binding can
-be used to configure the regulator operating mode.
-
-The regulators that support the standard "regulator-initial-mode" property,
-changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
-
-The possible values for "regulator-initial-mode" and "regulator-mode" are:
-	1: Normal regulator voltage output mode.
-	3: Low Power which reduces the quiescent current down to only 1uA
-
-The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
-header and can be included by device tree source files.
-
-The standard "regulator-mode" property can only be used for regulators that
-support changing their mode to Low Power Mode during suspend. These regulators
-are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
-been enabled for the given suspend state using "regulator-on-in-suspend" and
-has not been disabled for that state using "regulator-off-in-suspend".
-
-Example:
-
-	max77802@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		inb1-supply = <&parent_reg>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-initial-mode = <MAX77802_OPMODE_LP>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-	};