1 files changed, 0 insertions, 52 deletions
diff --git a/dts/Bindings/regulator/max8952.txt b/dts/Bindings/regulator/max8952.txt
deleted file mode 100644
index 866fcdd0f4..0000000000
--- a/dts/Bindings/regulator/max8952.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Maxim MAX8952 voltage regulator
-
-Required properties:
-- compatible: must be equal to "maxim,max8952"
-- reg: I2C slave address, usually 0x60
-- max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages
-  in microvolts. All values must be from range <770000, 1400000>
-- any required generic properties defined in regulator.txt
-
-Optional properties:
-- max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection
-- max8952,en-gpio: GPIO used to control enable status of regulator
-- max8952,default-mode: index of default DVS voltage, from <0, 3> range
-- max8952,sync-freq: sync frequency, must be one of following values:
-    - 0: 26 MHz
-    - 1: 13 MHz
-    - 2: 19.2 MHz
-  Defaults to 26 MHz if not specified.
-- max8952,ramp-speed: voltage ramp speed, must be one of following values:
-    - 0: 32mV/us
-    - 1: 16mV/us
-    - 2: 8mV/us
-    - 3: 4mV/us
-    - 4: 2mV/us
-    - 5: 1mV/us
-    - 6: 0.5mV/us
-    - 7: 0.25mV/us
-  Defaults to 32mV/us if not specified.
-- any available generic properties defined in regulator.txt
-
-Example:
-
-	vdd_arm_reg: pmic@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		/* max8952-specific properties */
-		max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-		max8952,en-gpio = <&gpx0 1 0>;
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		/* generic regulator properties */
-		regulator-name = "vdd_arm";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};