diff options
Diffstat (limited to 'dts/Bindings/regulator/nxp,pca9450-regulator.yaml')
-rw-r--r-- | dts/Bindings/regulator/nxp,pca9450-regulator.yaml | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/dts/Bindings/regulator/nxp,pca9450-regulator.yaml b/dts/Bindings/regulator/nxp,pca9450-regulator.yaml index f70f2e758a..3d469b8e97 100644 --- a/dts/Bindings/regulator/nxp,pca9450-regulator.yaml +++ b/dts/Bindings/regulator/nxp,pca9450-regulator.yaml @@ -17,10 +17,10 @@ description: | Datasheet is available at https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf -#The valid names for PCA9450 regulator nodes are: -#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, -#LDO1, LDO2, LDO3, LDO4, LDO5 -#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. +# The valid names for PCA9450 regulator nodes are: +# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, +# LDO1, LDO2, LDO3, LDO4, LDO5 +# Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C. properties: compatible: @@ -47,12 +47,6 @@ properties: description: Properties for single LDO regulator. - properties: - regulator-name: - pattern: "^LDO[1-5]$" - description: - should be "LDO1", ..., "LDO5" - unevaluatedProperties: false "^BUCK[1-6]$": @@ -62,13 +56,8 @@ properties: Properties for single BUCK regulator. properties: - regulator-name: - pattern: "^BUCK[1-6]$" - description: - should be "BUCK1", ..., "BUCK6" - nxp,dvs-run-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 600000 maximum: 2187500 description: @@ -76,7 +65,7 @@ properties: dvs(dynamic voltage scaling) property. nxp,dvs-standby-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 600000 maximum: 2187500 description: @@ -92,6 +81,17 @@ properties: LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is connected to a host GPIO. + nxp,i2c-lt-enable: + type: boolean + description: + Indicates that the I2C Level Translator is used. + + nxp,wdog_b-warm-reset: + type: boolean + description: + When WDOG_B signal is asserted a warm reset will be done instead of cold + reset. + required: - compatible - reg |