diff options
Diffstat (limited to 'dts/Bindings/regulator/qcom,rpmh-regulator.txt')
| -rw-r--r-- | dts/Bindings/regulator/qcom,rpmh-regulator.txt | 180 |
1 files changed, 0 insertions, 180 deletions
diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.txt b/dts/Bindings/regulator/qcom,rpmh-regulator.txt deleted file mode 100644 index ce1e043540..0000000000 --- a/dts/Bindings/regulator/qcom,rpmh-regulator.txt +++ /dev/null @@ -1,180 +0,0 @@ -Qualcomm Technologies, Inc. RPMh Regulators - -rpmh-regulator devices support PMIC regulator management via the Voltage -Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. The APPS -processor communicates with these hardware blocks via a Resource State -Coordinator (RSC) using command packets. The VRM allows changing three -parameters for a given regulator: enable state, output voltage, and operating -mode. The XOB allows changing only a single parameter for a given regulator: -its enable state. Despite its name, the XOB is capable of controlling the -enable state of any PMIC peripheral. It is used for clock buffers, low-voltage -switches, and LDO/SMPS regulators which have a fixed voltage and mode. - -======================= -Required Node Structure -======================= - -RPMh regulators must be described in two levels of device nodes. The first -level describes the PMIC containing the regulators and must reside within an -RPMh device node. The second level describes each regulator within the PMIC -which is to be used on the board. Each of these regulators maps to a single -RPMh resource. - -The names used for regulator nodes must match those supported by a given PMIC. -Supported regulator node names: - PM8005: smps1 - smps4 - PM8009: smps1 - smps2, ldo1 - ldo7 - PM8150: smps1 - smps10, ldo1 - ldo18 - PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb - PM8350: smps1 - smps12, ldo1 - ldo10, - PM8350C: smps1 - smps10, ldo1 - ldo13, bob - PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 - PMI8998: bob - PM6150: smps1 - smps5, ldo1 - ldo19 - PM6150L: smps1 - smps8, ldo1 - ldo11, bob - PMX55: smps1 - smps7, ldo1 - ldo16 - -======================== -First Level Nodes - PMIC -======================== - -- compatible - Usage: required - Value type: <string> - Definition: Must be one of below: - "qcom,pm8005-rpmh-regulators" - "qcom,pm8009-rpmh-regulators" - "qcom,pm8009-1-rpmh-regulators" - "qcom,pm8150-rpmh-regulators" - "qcom,pm8150l-rpmh-regulators" - "qcom,pm8350-rpmh-regulators" - "qcom,pm8350c-rpmh-regulators" - "qcom,pm8998-rpmh-regulators" - "qcom,pmc8180-rpmh-regulators" - "qcom,pmc8180c-rpmh-regulators" - "qcom,pmi8998-rpmh-regulators" - "qcom,pm6150-rpmh-regulators" - "qcom,pm6150l-rpmh-regulators" - "qcom,pmx55-rpmh-regulators" - -- qcom,pmic-id - Usage: required - Value type: <string> - Definition: RPMh resource name suffix used for the regulators found on - this PMIC. Typical values: "a", "b", "c", "d", "e", "f". - -- vdd-s1-supply -- vdd-s2-supply -- vdd-s3-supply -- vdd-s4-supply - Usage: optional (PM8998 and PM8005 only) - Value type: <phandle> - Definition: phandle of the parent supply regulator of one or more of the - regulators for this PMIC. - -- vdd-s5-supply -- vdd-s6-supply -- vdd-s7-supply -- vdd-s8-supply -- vdd-s9-supply -- vdd-s10-supply -- vdd-s11-supply -- vdd-s12-supply -- vdd-s13-supply -- vdd-l1-l27-supply -- vdd-l2-l8-l17-supply -- vdd-l3-l11-supply -- vdd-l4-l5-supply -- vdd-l6-supply -- vdd-l7-l12-l14-l15-supply -- vdd-l9-supply -- vdd-l10-l23-l25-supply -- vdd-l13-l19-l21-supply -- vdd-l16-l28-supply -- vdd-l18-l22-supply -- vdd-l20-l24-supply -- vdd-l26-supply -- vin-lvs-1-2-supply - Usage: optional (PM8998 only) - Value type: <phandle> - Definition: phandle of the parent supply regulator of one or more of the - regulators for this PMIC. - -- vdd-bob-supply - Usage: optional (PMI8998 only) - Value type: <phandle> - Definition: BOB regulator parent supply phandle - -=============================== -Second Level Nodes - Regulators -=============================== - -- qcom,always-wait-for-ack - Usage: optional - Value type: <empty> - Definition: Boolean flag which indicates that the application processor - must wait for an ACK or a NACK from RPMh for every request - sent for this regulator including those which are for a - strictly lower power state. - -Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt -may also be used. regulator-initial-mode and regulator-allowed-modes may be -specified for VRM regulators using mode values from -include/dt-bindings/regulator/qcom,rpmh-regulator.h. regulator-allow-bypass -may be specified for BOB type regulators managed via VRM. -regulator-allow-set-load may be specified for LDO type regulators managed via -VRM. - -======== -Examples -======== - -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -&apps_rsc { - pm8998-rpmh-regulators { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-l7-l12-l14-l15-supply = <&pm8998_s5>; - - smps2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - pm8998_s5: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - }; - - lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - pmi8998-rpmh-regulators { - compatible = "qcom,pmi8998-rpmh-regulators"; - qcom,pmic-id = "b"; - - bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_AUTO - RPMH_REGULATOR_MODE_HPM>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - }; -}; |