diff options
Diffstat (limited to 'dts/Bindings/regulator/qcom,rpmh-regulator.yaml')
| -rw-r--r-- | dts/Bindings/regulator/qcom,rpmh-regulator.yaml | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/dts/Bindings/regulator/qcom,rpmh-regulator.yaml b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml new file mode 100644 index 0000000000..e561a5b941 --- /dev/null +++ b/dts/Bindings/regulator/qcom,rpmh-regulator.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. RPMh Regulators + +maintainers: + - David Collins <collinsd@codeaurora.org> + +description: | + rpmh-regulator devices support PMIC regulator management via the Voltage + Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators. + The APPS processor communicates with these hardware blocks via a + Resource State Coordinator (RSC) using command packets. The VRM allows + changing three parameters for a given regulator, enable state, output + voltage, and operating mode. The XOB allows changing only a single + parameter for a given regulator, its enable state. Despite its name, + the XOB is capable of controlling the enable state of any PMIC peripheral. + It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators + which have a fixed voltage and mode. + + ======================= + Required Node Structure + ======================= + + RPMh regulators must be described in two levels of device nodes. The first + level describes the PMIC containing the regulators and must reside within an + RPMh device node. The second level describes each regulator within the PMIC + which is to be used on the board. Each of these regulators maps to a single + RPMh resource. + + The names used for regulator nodes must match those supported by a given + PMIC. Supported regulator node names are + For PM8005, smps1 - smps4 + For PM8009, smps1 - smps2, ldo1 - ldo7 + For PM8150, smps1 - smps10, ldo1 - ldo18 + For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb + For PM8350, smps1 - smps12, ldo1 - ldo10 + For PM8350C, smps1 - smps10, ldo1 - ldo13, bob + For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + For PMI8998, bob + For PM6150, smps1 - smps5, ldo1 - ldo19 + For PM6150L, smps1 - smps8, ldo1 - ldo11, bob + For PMX55, smps1 - smps7, ldo1 - ldo16 + For PM7325, smps1 - smps8, ldo1 - ldo19 + For PMR735A, smps1 - smps3, ldo1 - ldo7 + +properties: + compatible: + enum: + - qcom,pm8005-rpmh-regulators + - qcom,pm8009-rpmh-regulators + - qcom,pm8009-1-rpmh-regulators + - qcom,pm8150-rpmh-regulators + - qcom,pm8150l-rpmh-regulators + - qcom,pm8350-rpmh-regulators + - qcom,pm8350c-rpmh-regulators + - qcom,pm8998-rpmh-regulators + - qcom,pmi8998-rpmh-regulators + - qcom,pm6150-rpmh-regulators + - qcom,pm6150l-rpmh-regulators + - qcom,pmx55-rpmh-regulators + - qcom,pm7325-rpmh-regulators + - qcom,pmr735a-rpmh-regulators + + qcom,pmic-id: + description: | + RPMh resource name suffix used for the regulators found + on this PMIC. + $ref: /schemas/types.yaml#/definitions/string + enum: [a, b, c, d, e, f] + + qcom,always-wait-for-ack: + description: | + Boolean flag which indicates that the application processor + must wait for an ACK or a NACK from RPMh for every request + sent for this regulator including those which are for a + strictly lower power state. + $ref: /schemas/types.yaml#/definitions/flag + + vdd-flash-supply: + description: Input supply phandle of flash. + + vdd-rgb-supply: + description: Input supply phandle of rgb. + + vin-lvs-1-2-supply: + description: Input supply phandle of one or more regulators. + + vdd-bob-supply: + description: BOB regulator parent supply phandle. + + bob: + type: object + $ref: "regulator.yaml#" + description: BOB regulator node. + +patternProperties: + "^vdd-s([0-9]+)-supply$": + description: Input supply phandle(s) of one or more regulators. + + "^vdd-(l[0-9]+[-]){1,5}supply$": + description: Input supply phandle(s) of one or more regulators. + + "^(smps|ldo|lvs)[0-9]+$": + type: object + $ref: "regulator.yaml#" + description: smps/ldo regulator nodes(s). + +additionalProperties: false + +required: + - compatible + - qcom,pmic-id + +examples: + - | + #include <dt-bindings/regulator/qcom,rpmh-regulator.h> + + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l7-l12-l14-l15-supply = <&pm8998_s5>; + + smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_AUTO + RPMH_REGULATOR_MODE_HPM>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +... |