1 files changed, 0 insertions, 102 deletions
diff --git a/dts/Bindings/regulator/samsung,s2mps11.txt b/dts/Bindings/regulator/samsung,s2mps11.txt
deleted file mode 100644
index 27a48bf1b1..0000000000
--- a/dts/Bindings/regulator/samsung,s2mps11.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Binding for Samsung S2M family regulator block
-==============================================
-
-This is a part of device tree bindings for S2M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Names of regulators supported by different devices:
-	- LDOn
-		  - valid values for n are:
-			- S2MPS11: 1 to 38
-			- S2MPS13: 1 to 40
-			- S2MPS14: 1 to 25
-			- S2MPS15: 1 to 27
-			- S2MPU02: 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are:
-			- S2MPS11: 1 to 10
-			- S2MPS13: 1 to 10
-			- S2MPS14: 1 to 5
-			- S2MPS15: 1 to 10
-			- S2MPU02: 1 to 7
-		  - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500,
-   25000 (default) or 50000.
-
-   Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6}
-   by setting it to <0>.
-
-   Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value
-   will be set for a particular group of bucks so provide the same
-   regulator-ramp-delay value for them.
-   Groups sharing ramp rate:
-    - buck{1,6},
-    - buck{3,4},
-    - buck{7,8,10}.
-
- - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be
-   configured to external control over GPIO. To turn this feature on this
-   property must be added to the regulator sub-node:
-    - samsung,ext-control-gpios: GPIO specifier for one GPIO
-                                 controlling this regulator (enable/disable)
-  Example:
-	LDO12 {
-		regulator-name = "V_EMMC_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		samsung,ext-control-gpios = <&gpk0 2 0>;
-	};
-
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};