1 files changed, 0 insertions, 44 deletions
diff --git a/dts/Bindings/regulator/tps62360-regulator.txt b/dts/Bindings/regulator/tps62360-regulator.txt
deleted file mode 100644
index 1b20c3dbcd..0000000000
--- a/dts/Bindings/regulator/tps62360-regulator.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-TPS62360 Voltage regulators
-
-Required properties:
-- compatible: Must be one of the following.
-	"ti,tps62360"
-	"ti,tps62361",
-	"ti,tps62362",
-	"ti,tps62363",
-- reg: I2C slave address
-
-Optional properties:
-- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
-- ti,enable-pull-down: Enable pull down. This is boolean value.
-- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
-  If this property is missing, then assume that there is no GPIO
-  for vsel0 control.
-- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
-  If this property is missing, then assume that there is no GPIO
-  for vsel1 control.
-- ti,vsel0-state-high: Initial state of vsel0 input is high.
-  If this property is missing, then assume the state as low (0).
-- ti,vsel1-state-high: Initial state of vsel1 input is high.
-  If this property is missing, then assume the state as low (0).
-
-Any property defined as part of the core regulator binding, defined in
-regulator.txt, can also be used.
-
-Example:
-
-	abc: tps62360 {
-		compatible = "ti,tps62361";
-		reg =  <0x60>;
-		regulator-name = "tps62361-vout";
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-boot-on
-		ti,vsel0-gpio = <&gpio1 16 0>;
-		ti,vsel1-gpio = <&gpio1 17 0>;
-		ti,vsel0-state-high;
-		ti,vsel1-state-high;
-		ti,enable-pull-down;
-		ti,enable-force-pwm;
-		ti,enable-vout-discharge;
-	};